FTTH Pre-Connectorized Drop Patchcord

Optic Fiber Patch Cord

FTTH Pre-Connectorized Drop Patchcord

Pre-Connectorized Drop cable is over the ground fiber optic drop cable equipped with fabricated connector on both ends, packed in certain length, and used for distributing optical signal from Optical Distribution Point (ODP) to Optical Termination Premise (OTP) in customer’s House.

According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC.

Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as FTTX and LAN etc.


Product Detail

FAQ

Product Tags

Product Features

1. Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property.

2. Excellent repeatability, exchangeability, wearability and stability.

3. Constructed from high quality connectors and standard fibers.

4. Applicable connector: FC, SC, ST, LC and etc.

5. Layouts can be wired much the same way as ordinary electric cable installation.

6. Novel flute design, easily strip and splice, simplify the installation and maintenance.

7. Available in different fibre types: G652D, G657A1, G657A2, G657B3.

8. Ferrule Interface Type: UPC TO UPC, APC TO APC, APC TO UPC.

9. Available FTTH Drop cable diameters: 2.0*3.0mm, 2.0*5.0mm.

10. Low smoke, zero halogen and flame retardant sheath.

11. Available in standard and custom lengths.

12. Conform to IEC, EIA-TIA, and Telecordia performance requirements.

Applications

1. FTTH network for indoor and outdoor.

2. Local Area Network and Building Cabling Network.

3. Interconnect between instruments, terminal box and communication.

4. Factory LAN systems.

5. Intelligent optical fibre network in buildings, underground network systems.

6. Transportation control systems.

NOTE: We can provide specify patch cord which required by customer.

Cable Structures

a

Performance Parameters of the Optical Fiber

ITEMS UNITS SPECIFICATION
Fiber Type   G652D G657A
Attenuation dB/km 1310 nm≤ 0.36  1550 nm≤ 0.22
 

Chromatic Dispersion

 

ps/nm.km

1310 nm≤ 3.6

1550 nm≤ 18

1625 nm≤ 22

Zero Dispersion Slope ps/nm2.km            ≤ 0.092
Zero Dispersion Wavelength nm 1300 ~ 1324
Cut-off Wavelength (cc) nm ≤ 1260
Attenuation vs. Bending

(60mm x100turns)

dB (30 mm radius, 100 rings

)≤ 0.1 @ 1625 nm

(10 mm radius, 1 ring)≤ 1.5 @ 1625 nm
Mode Field Diameter m 9.2  0.4 at 1310 nm 9.2  0.4 at 1310 nm
Core-Clad Concentricity m ≤ 0.5 ≤ 0.5
Cladding Diameter m 125 ± 1 125 ± 1
Cladding Non-circularity % ≤ 0.8 ≤ 0.8
Coating Diameter m 245 ± 5 245 ± 5
Proof Test Gpa ≥ 0.69 ≥ 0.69

 

Specifications

Parameter

FC/SC/LC/ST

MU/MTRJ

E2000

SM

MM

SM

MM

SM

UPC

APC

UPC

UPC

UPC

UPC

APC

Operating Wavelength (nm)

1310/1550

850/1300

1310/1550

850/1300

1310/1550

Insertion Loss (dB)

≤0.2

≤0.3

≤0.2

 ≤0.2

≤0.2

≤0.2

≤0.3

Return Loss (dB)

≥50

≥60

≥35

≥50

≥35

≥50

≥60

Repeatability Loss (dB)

≤0.1

Interchangeability Loss (dB)

≤0.2

Bending Radius

Static/Dynamic

15/30

Tensile Strength (N)

≥1000

Durability

500 mating cycles

Operating Temperature (C)

-45~+85

Storage Temperature (C)

-45~+85

Packaging Information

Cable Type

Length

Outer Carton Size (mm)

Gross Weight (kg)

Quantity In Carton Pcs

GJYXCH

100

35*35*30

21

12

GJYXCH

150

35*35*30

25

10

GJYXCH

200

35*35*30

27

8

GJYXCH

250

35*35*30

29

7

SC APC to SC APC

Inner Packaging

b
b

Outer Carton

b
c

Pallet

  • Products Recommended

    • J Clamp J-Hook Big Type Suspension Clamp

      J Clamp J-Hook Big Type Suspension Clamp

      OYI anchoring suspension clamp J hook is durable and of good quality, making it a worthwhile choice. It plays an important role in many industrial settings. The main material of the OYI anchoring suspension clamp is carbon steel, with an electro galvanized surface that prevents rust and ensures a long lifespan for pole accessories. The J hook suspension clamp can be used with the OYI series stainless steel bands and buckles to fix cables onto poles, playing different roles in different places. Different cable sizes are available.

      The OYI anchoring suspension clamp can also be used to link signs and cable installations on posts. It is electro galvanized and can be used outdoors for over 10 years without rusting. It has no sharp edges, with rounded corners, and all items are clean, rust free, smooth, and uniform throughout, free from burrs. It plays a huge role in industrial production.

    • OYI-FOSC-09H

      OYI-FOSC-09H

      The OYI-FOSC-09H Horizontal fiber optic splice closure has two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, manhole of pipeline, and embedded situations, etc. Comparing with a terminal box, the closure requires much stricter requirements for sealing. Optical splice closures are used to distribute, splice, and store the outdoor optical cables that enter and exit from the ends of the closure.

      The closure has 3 entrance ports and 3 output ports. The shell of the product is made from PC+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.

    • Loose Tube Armored Flame-retardant Direct Buried Cable

      Loose Tube Armored Flame-retardant Direct Burie...

      The fibers are positioned in a loose tube made of PBT. The tubes are filled with a water-resistant filling compound. A steel wire or FRP is located in the center of the core as a metallic strength member. The tubes and the fillers are stranded around the strength member into a compact and circular core. An Aluminum Polyethylene Laminate (APL) or steel tape is applied around the cable core, which is filled with filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE (LSZH) outer sheath.(WITH DOUBLE SHEATHS)

    • Anchoring Clamp PA1500

      Anchoring Clamp PA1500

      The anchoring cable clamp is a high-quality and durable product. It consists of two parts: a stainless steel wire and a reinforced nylon body made of plastic. The body of the clamp is made of UV plastic, which is friendly and safe to use even in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 8-12mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly.

      FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests.

    • OYI FAT H24A

      OYI FAT H24A

      This box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system.

      It intergtates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building.

    • ST Type

      ST Type

      Fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link fiber optic cables or fiber optic connectors between two fiber optic lines. It contains the interconnect sleeve that holds two ferrules together. By precisely linking two connectors, fiber optic adapters allow the light sources to be transmitted at their maximum and minimize the loss as much as possible. At the same time, fiber optic adapters have the advantages of low insertion loss, good interchangeability, and reproducibility. They are used to connect optical fiber connectors such as FC, SC, LC, ST, MU, MTRJ, D4, DIN, MPO, etc. They are widely used in optical fiber communications equipment, measuring appliances, and so on. The performance is stable and reliable.

    If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.

    Facebook

    YouTube

    YouTube

    Instagram

    Instagram

    LinkedIn

    LinkedIn

    Whatsapp

    +8618926041961

    Email

    sales@oyii.net