0755-23179541 
sales@oyii.net.png)
8618926041961
OYI-ATB04B Desktop Box
Optic Fiber FTTH Box 4 Cores Type
OYI-ATB04B Desktop Box
Product Features
1.IP-55 Protection level.
2.Integrated with cable termination and management rods.
3.Manage fibers in a reasonable fiber radius(30mm) condition.
4.High quality industrial anti-aging ABS plastic material.
5.Suitable for the wall mounted installation.
6.Suitable for FTTH indoor application.
7.4 port cable entrance for drop cable or patch cable.
8.Fiber adapter can be installed in the rosette for patching.
9.UL94-V0 fire-retardant material can be customized as option.
10.Temperature: -40 ℃ to +85 ℃.
11.Humidity: ≤ 95% (+40 ℃).
12.Atmospheric pressure: 70KPa to 108KPa.
13.Box structure: The 4-port desktop box consists mainly of the cover and the bottom box. The box structure is shown in the figure.
Specifications
|
Item No. |
Description |
Weight (g) |
Size (mm) |
|
OYI-ATB04A |
For 4pcs SC Simplex Adapter |
76 |
110*80*30 |
|
Material |
ABS/ABS+PC |
||
|
Colour |
White or customer’s request |
||
|
Waterproof |
IP55 |
||
Applications
1.FTTX access system terminal link.
2.Widely used in FTTH access network.
3.Telecommunication networks.
4.CATV networks.
5.Data communications networks.
6.Local area networks.
The Installation Instruction Of The Box
1. Wall installation
1.1 According to the bottom box mounting hole distance on the wall to play two mounting holes, and knock into the plastic expansion sleeve.
1.2 Fix the box to the wall with M8 × 40 screws.
1.3 Check the installation of the box, qualified to cover the lid.
1.4 According to the construction requirements of the introduction of outdoor cable and FTTH drop cable.
2. Open the box
2.1 Hands were holding the cover and the bottom box, a little hard to break out to open the box.
Packaging Information
1. Quantity: 10pcs/ Inner box, 200pcs/Outer box.
2.Carton Size: 61*48*24cm.
3.N.Weight: 15.6kg/Outer Carton.
4.G.Weight: 16.6kg/Outer Carton.
5.OEM service available for mass quantity, can print logo on cartons.
Inner Box
Outer Carton
-
Optical Fiber Cable Storage Bracket
The Fiber Cable storage bracket is useful. Its main material is carbon steel. The surface is treated with hot-dipped galvanization, which allows it to be used outdoors for more than 5 years without rusting or experiencing any surface changes. -
Anchoring Clamp OYI-TA03-04 Series
This OYI-TA03 and 04 cable clamp is made of high-strength nylon and 201 stainless steel, suitable for circular cables with a diameter of 4-22mm. Its biggest feature is the unique design of hanging and pulling cables of different sizes through the conversion wedge, which is firm and durable. The optical cable is used in ADSS cables and various types of optical cables, and is easy to install and use with high cost-effectiveness. The difference between 03 and 04 is that 03 steel wire hooks from the outside to the inside, while 04 type wide steel wire hooks from the inside to the outside -
OYI-FOSC H12
The OYI-FOSC-04H Horizontal fiber optic splice closure has two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, manhole of pipeline, and embedded situations, etc. Comparing with a terminal box, the closure requires much stricter requirements for sealing. Optical splice closures are used to distribute, splice, and store the outdoor optical cables that enter and exit from the ends of the closure. The closure has 2 entrance ports and 2 output ports. The shell of the product is made from ABS/PC+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. -
FTTH Pre-Connectorized Drop Patchcord
Pre-Connectorized Drop cable is over the ground fiber optic drop cable equipped with fabricated connector on both ends, packed in certain length, and used for distributing optical signal from Optical Distribution Point (ODP) to Optical Termination Premise (OTP) in customer’s House. According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC. Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as FTTX and LAN etc. -
OYI-ATB04C Desktop Box
OYI-ATB04C 4-port desktop box is developed and produced by the company itself. The product’s performance meets the requirements of industry standards YD/T2150-2010. It is suitable for installing multiple types of modules and can be applied to the work area wiring subsystem to achieve dual-core fiber access and port output. It provides fiber fixing, stripping, splicing, and protection devices, and allows for a small amount of redundant fiber inventory, making it suitable for FTTD (fiber to the desktop) system applications. The box is made of high-quality ABS plastic through injection molding, making it anti-collision, flame retardant, and highly impact-resistant. It has good sealing and anti-aging properties, protecting the cable exit and serving as a screen. It can be installed on the wall. -
Drop Cable Anchoring Clamp S-Type
Drop wire tension clamp s-type, also called FTTH drop s-clamp, is developed to tension and support flat or round fiber optic cable on intermediate routes or last mile connections during outdoor overhead FTTH deployment. It is made of UV proof plastic and a stainless steel wire loop processed by injection molding technology.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
