0755-23179541 
sales@oyii.net.png)
8618926041961
OYI FAT H24A
24 Core Fiber Optic Distribution Box
OYI FAT H24A
Product Features
1.Total enclosed structure.
2.Material: ABS, wet-proof, water-proof, dust proof, anti-aging, protection level up to IP65.
3.Clamping for feeder cable and drop cable, fiber splicing, fixation, storage distribution etc all in one.
4.Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type SC adaptor ,installation, easy maintenance.
5.Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
6. Box can be installed by the way of wall-mounted or poled-mounted,suitable for both indoor and outdoor uses.
Applications
1. Wall mounting and pole mounting installtion.
2.FTTH pre-installation and filed installation.
3.5-10mm cable ports suitable for 2x3mm indoor FTTH drop cable and outdoor figure FTTH self-supporting drop cable.
Configuration
|
Material |
Size |
Max Capacity |
Nos of PLC |
Nos of Adaptor |
Weight |
Ports |
|
Strengthen ABS |
A*B*C(mm) 300*210*90 |
Splice 96 Fibers (4trays,24core/tray) |
1pcs of 1x8 PLC 1pcs of 1x16 PLC |
16/24 pcs of SC(max) |
1.35kg |
4 in 16 out 4 in 24 out |
Product Pictures
 |
|
|
|
 |
Standard Accessories
Screw: 4mm*40mm 4pcs .
Expension bolt: M6 4pcs .
Cable tie: 3mm*10mm 6pcs .
Heat-shrink sleeve: 1.0mm*3mm*60mm 16/24pcs .
Metal ring: 2pcs .
Key: 1pc .
Packing
Inner Box
Outer Carton
-
OYI-FOSC-D105H
This product consists of two parts: Stainless Steel Wire and Reinforced nylon body, PA500 anchor clamp is designed to diameter 5mm distribution cable and also fit the various ADSS cable designs (Applicable to 3~9mm ADSS). Anchor clamp is used on dead-end fiber optic cables. FTTH drop cable cable Fitting is easy in installation,Open hook self-locking construction perform easiest installation on pole. Good quality PA500 anchor clamps passed the tensile tests, operation experience with temperatures ranging form -40 degree up to 60 degree test, temperature cycling test, aging test, corrosion resistant test and so on. -
Loose Tube Non-metallic Heavy Type Rodent Prote...
Insert the optical fiber into the PBT loose tube, fill the loose tube with waterproof ointment. The center of the cable core is a non-metallic reinforced core, and the gap is filled with waterproof ointment. The loose tube (and filler) is twisted around the center to strengthen the core, forming a compact and circular cable core. A layer of protective material is extruded outside the cable core, and glass yarn is placed outside the protective tube as a rodent proof material. Then, a layer of polyethylene (PE) protective material is extruded.(WITH DOUBLE SHEATHS) -
Self-supporting Figure 8 Fiber Optic Cable
The 250um fibers are positioned in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire is located in the center of the core as a metallic strength member. The tubes (and fibers) are stranded around the strength member into a compact and circular cable core. After an Aluminum (or steel tape) Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of the cable, accompanied by the stranded wires as the supporting part, is completed with a polyethylene (PE) sheath to form a figure 8 structure. Figure 8 cables, GYTC8A and GYTC8S, are also available upon request. This type of cable is specifically designed for self-supporting aerial installation. -
OYI-ODF-SR2-Series Type
OYI-ODF-SR2-Series Type optical fiber cable terminal panel is used for cable terminal connection, can be used as a distribution box. 19″ standard structure; Rack installation; Drawer structure design, with front cable management plate, Flexible pulling, Convenient to operate; Suitable for SC, LC ,ST, FC,E2000 adapters, etc. Rack mounted Optical Cable Terminal Box is the device that terminates between the optical cables and the optical communication equipments, with the function of splicing, termination, storing and patching of optical cables. SR-series sliding rail enclosure, easy access to fiber management and splicing. Aversatile solution in multiple sizes (1U/2U/3U/4U) and styles for building backbones, data centers and enterprise applications. -
GJPFWQH Fiber Optic Cable
Easy branches indoor riser cable uses several Micro-module as optical communication medium. Widely used in Metro ODN network especially inside buildings which have multi-floors and rooms and two parallel fiber reinforce plastics are its strength member, a ripcord and Extract able easy strip fiber unit are protected by LSZH sheath. Micro-module is easy in stripping to get the fibers and easy drawing out from the windows cut on the cable sheath, with a color stripe embedded. -
OYI-OCC-B Type
Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross-connection cabinets will be widely deployed and move closer to the end user.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
