0755-23179541 
sales@oyii.net.png)
8618926041961
OYI-FAT16J-B Series Terminal Box
Optic Fiber Terminal/Distribution Box 16 Cores Type
OYI-FAT16J-B Series Terminal Box
Product Features
1. Total enclosed structure.
2. Material: ABS, waterproof design with IP-66 protection level, dustproof, anti-aging, RoHS.
3. Optical fiber cable, pigtails, and patch cords are running through their own path without disturbing each other.
4. The distribution box can be flipped up, and the feeder cable can be placed in a cup-joint way, making it easy for maintenance and installation.
5. The distribution box can be installed by wall-mounted or pole-mounted methods, suitable for both indoor and outdoor use.
6. Suitable for fusion splice or mechanical splice.
7. 2 pcs of 1*8 Splitter or 1 pc of 1*16 Splitter can be installed as an option.
Specifications
|
Item No. |
Description |
Weight (kg) |
Size (mm) |
|
OYI-FAT16J-B |
Without key |
1 |
285*175*110 |
|
Material |
ABS/ABS+PC |
||
|
Colour |
White, Black, Gray or customer’s request |
||
|
Waterproof |
IP65 |
||
|
Relative Humidity |
<95%(+40°C) |
||
|
Insulated Resistance |
>2x10MΩ/500V(DC) |
||
Applications
1. FTTX access system terminal link.
2. Widely used in FTTH access network.
3. Telecommunication networks.
4. CATV networks.
5. Data communications networks.
6. Local area networks.
The Installation Instruction of the Box
1.Wall hanging
1.1 According to the distance between the backplane mounting holes, drill 4 mounting holes on the wall and insert the plastic expansion sleeves.
1.2 Secure the box to the wall using M8 * 40 screws.
1.3 Position the upper end of the box into the wall hole and then use M8 * 40 screws to secure the box to the wall.
1.4 Check the installation of the box and close the door once it is confirmed to be qualified. To prevent rainwater from entering the box, tighten the box using a key column.
1.5 Insert the outdoor optical cable and FTTH drop optical cable according to the construction requirements.
2.Hanging rod installation
2.1 Remove the box installation backplane and hoop, and insert the hoop into the installation backplane. 2.2 Fix the backboard on the pole through the hoop. To prevent accidents, it is necessary to check whether the hoop locks the pole securely and ensure that the box is firm and reliable, with no looseness.
2.3 The installation of the box and the insertion of the optical cable are the same as before.
Packaging Information
1. Quantity: 10pcs/Outer box.
2. Carton Size: 71*33.5*40.5cm.
3. N. Weight: 17kg/Outer Carton.
4. G. Weight: 18kg/Outer Carton.
5. OEM service available for mass quantity, can print logo on cartons.
Inter Box
Outer Carton
-
Flat Twin Fiber Cable GJFJBV
The flat twin cable uses 600μm or 900μm tight buffered fiber as the optical communication medium. The tight buffered fiber is wrapped with a layer of aramid yarn as a strength member. Such a unit is extruded with a layer as an inner sheath. The cable is completed with an outer sheath.(PVC, OFNP, or LSZH) -
SFP-ETRx-4
OPT-ETRx-4 Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the Gigabit Ethernet standards as specified in IEEE STD 802.3. The 10/100/1000 BASE-T physical layer IC (PHY) can be accessed via 12C, allowing access to all PHY settings and features. The OPT-ETRx-4 is compatible with 1000BASE-X auto-negotiation, and have a link indication feature. PHY is disabled when TX disable is high or open. -
All Dielectric Self-Supporting Cable
The structure of ADSS (single-sheath stranded type) is to place 250um optical fiber into a loose tube made of PBT, which is then filled with waterproof compound. The center of the cable core is a non-metallic central reinforcement made of fiber-reinforced composite (FRP). The loose tubes (and filler rope) are twisted around the central reinforcing core. The seam barrier in the relay core is filled with water-blocking filler, and a layer of waterproof tape is extruded outside the cable core. Rayon yarn is then used, followed by extruded polyethylene (PE) sheath into the cable. It is covered with a thin polyethylene (PE) inner sheath. After a stranded layer of aramid yarns is applied over the inner sheath as a strength member, the cable is completed with a PE or AT (anti-tracking) outer sheath. -
OYI-FAT F24C
This box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system. It intergtates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building. -
Stainless Steel Banding Strapping Tools
The giant banding tool is useful and of high quality, with its special design for strapping giant steel bands. The cutting knife is made with a special steel alloy and undergoes heat treatment, which makes it last longer. It is used in marine and petrol systems, such as hose assemblies, cable bundling, and general fastening. It can be used with the series of stainless steel bands and buckles. -
OYI-ATB08B Terminal Box
OYI-ATB08B 8-Cores Terminal box is developed and produced by the company itself. The product’s performance meets the requirements of industry standards YD/T2150-2010. It is suitable for installing multiple types of modules and can be applied to the work area wiring subsystem to achieve dual-core fiber access and port output. It provides fiber fixing, stripping, splicing, and protection devices, and allows for a small amount of redundant fiber inventory, making it suitable for FTTH (FTTH drop optical cables for end connections) system applications. The box is made of high-quality ABS plastic through injection molding, making it anti-collision, flame retardant, and highly impact-resistant. It has good sealing and anti-aging properties, protecting the cable exit and serving as a screen. It can be installed on the wall.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
