0755-23179541 
sales@oyii.net
10/100Base-TX Ethernet Port to 100Base-FX Fiber Port
Fiber Media Converter
10/100Base-TX Ethernet Port to 100Base-FX Fiber Port
Product Description
MC0101F fiber Ethernet media converter creates a cost-effective Ethernet to fiber link, transparently converting to/ from 10 Base-T or 100 Base-TX Ethernet signals and 100 Base-FX fiber optical signals to extend an Ethernet network connection over a multimode/single mode fiber backbone.
MC0101F fiber Ethernet media converter supports maximum multimode fiber optic cable distance of 2km or a maximum single mode fiber optic cable distance of 120 km, providing a simple solution for connecting 10/100 Base-TX Ethernet networks to remote locations using SC/ST/FC/LC-terminated single mode/multimode fiber, while delivering solid network performance and scalability.
Easy to set-up and install, this compact, value-conscious fast Ethernet media converter features autos witching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode, speed, full and half duplex.
Product Features
1. Support 1100Base-FX fiber port and 110/100Base-TX Ethernet port.
2. Support IEEE802.3, IEEE802.3u fast Ethernet.
3. Full and half duplex communication.
4. Plug and play.
5. Easy to read LED indicators.
6. Includes external 5VDC power supply.
Technical Specifications
Dimensions
Ordering information
-
8 Cores Type OYI-FAT08E Terminal Box
The 8-core OYI-FAT08E optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The OYI-FAT08E optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. It can accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 8 cores capacity specifications to meet the expansion needs of the box. -
OYI-FOSC HO7
The OYI-FOSC-02H horizontal fiber optic splice closure has two connection options: direct connection and splitting connection. It is applicable in situations such as overhead, man-well of pipeline, and embedded situations, among others. Comparing with a terminal box, the closure requires much stricter sealing requirements. Optical splice closures are used to distribute, splice, and store outdoor optical cables that enter and exit from the ends of the closure. The closure has 2 entrance ports. The shell of the product is made from ABS+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. -
ADSS Suspension Clamp Type A
The ADSS suspension unit is made of high tensile galvanized steel wire materials, which have higher corrosion resistance capability and can extend the lifetime usage. The gentle rubber clamp pieces improve self-damping and reduce abrasion. -
OYI-FAT 24C
This box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system. It intergates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building. -
310GR
ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON Realtek chipset and has high reliability, easy management, flexible configuration, robustness, good quality service guarantee (Qos).XPON has G / E PON mutual conversion function, which is realized by pure software. -
Central Loose Tube Stranded Figure 8 Self-suppo...
The fibers are positioned in a loose tube made of PBT. The tube is filled with a water-resistant filling compound. The tubes (and the fillers) are stranded around the strength member into a compact and circular core. Then, the core is wrapped with swelling tape longitudinally. After part of the cable, accompanied by the stranded wires as the supporting part, is completed, it is covered with a PE sheath to form a figure-8 structure.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
