0755-23179541 
sales@oyii.net.png)
8618926041961
OYI-FAT16D Terminal Box
Optic Fiber Terminal/Distribution Box 16 Cores Type
OYI-FAT16D Terminal Box
The OYI-FAT16D optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 2 cable holes under the box that can accommodate 2 outdoor optical cables for direct or different junctions, and it can also accommodate 16 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 16 cores capacity specifications to accommodate the box's expansion needs.
Product Video
Product Features
Material: ABS, waterproof design with IP-66 protection level, dustproof, anti-aging, RoHS.
Optical fiber cable, pigtails, and patch cords are running through their own path without disturbing each other.
The distribution box can be flipped up, and the feeder cable can be placed in a cup-joint way, making it easy for maintenance and installation.
The distribution box can be installed by wall-mounted or pole-mounted methods, suitable for both indoor and outdoor use.
Suitable for fusion splice or mechanical splice.
2 pcs of 1*8 Splitter or 1 pc of 1*16 Splitter can be installed as an option.
Total enclosed structure.
Specifications
| Item No. | Description | Weight (kg) | Size (mm) |
| OYI-FAT16D-SC | For 16PCS SC Simplex Adapter | 1 | 310*245*120 |
| OYI-FAT16D-PLC | For 1PC 1*16 Cassette PLC | 1 | 310*245*120 |
| Material | ABS/ABS+PC | ||
| Colour | White, Black, Gray or customer’s request | ||
| Waterproof | IP66 | ||
Applications
FTTX access system terminal link.
Widely used in FTTH access network.
Telecommunication networks.
CATV networks.
Data communications networks.
Local area networks.
The Installation Instruction of the Box
Wall hanging
According to the distance between the backplane mounting holes, drill 4 mounting holes on the wall and insert the plastic expansion sleeves.
Secure the box to the wall using M8 * 40 screws.
Position the upper end of the box into the wall hole and then use M8 * 40 screws to secure the box to the wall.
Check the installation of the box and close the door once it is confirmed to be qualified. To prevent rainwater from entering the box, tighten the box using a key column.
Insert the outdoor optical cable and FTTH drop optical cable according to the construction requirements.
Hanging rod installation
Remove the box installation backplane and hoop, and insert the hoop into the installation backplane.
Fix the backboard on the pole through the hoop. To prevent accidents, it is necessary to check whether the hoop locks the pole securely and ensure that the box is firm and reliable, with no looseness.
The installation of the box and the insertion of the optical cable are the same as before.
Packaging Information
Quantity: 20pcs/Outer box.
Carton Size: 62*33.5*51.5cm.
N.Weight: 15.6kg/Outer Carton.
G.Weight: 16.6kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
OYI-OW2 series Type
Outdoor Wall-mount Fiber Optic Distribution Frame is mainly used for connecting the outdoor optical cables, optical patch cords and optical pigtails. It can be wall mounted or pole mounted, and facilitates the test and refit of the lines. It is an integrated unit for fiber management, and can be used as distribution box. This equipment function is to fix and manage the fiber optic cables inside the box as well as provide protection. Fiber optic termination box is modular so they are applying cable to your existing systems without any modification or additional work. Suitable for installation of FC, SC, ST, LC, etc. adaptors, and suitable for fiber optic pigtail or plastic box type PLC splitters and large working space to integrate the pigtails, cables and adapters. -
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access. -
OYI-FAT F24C
This box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system. It intergtates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building. -
OYI-FOSC H12
The OYI-FOSC-04H Horizontal fiber optic splice closure has two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, manhole of pipeline, and embedded situations, etc. Comparing with a terminal box, the closure requires much stricter requirements for sealing. Optical splice closures are used to distribute, splice, and store the outdoor optical cables that enter and exit from the ends of the closure. The closure has 2 entrance ports and 2 output ports. The shell of the product is made from ABS/PC+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. -
OYI-ODF-FR-Series Type
The OYI-ODF-FR-Series type optical fiber cable terminal panel is used for cable terminal connection and can also be used as a distribution box. It has a 19″ standard structure and is of the fixed rack-mounted type, making it convenient to operate. It is suitable for SC, LC, ST, FC, E2000 adapters, and more. The rack mounted optical cable terminal box is a device that terminates between the optical cables and the optical communication equipment. It has the functions of splicing, termination, storing, and patching of optical cables. The FR-series rack mount fiber enclosure provides easy access to fiber management and splicing. It offers a versatile solution in multiple sizes (1U/2U/3U/4U) and styles for building backbones, data centers, and enterprise applications. -
J Clamp J-Hook Big Type Suspension Clamp
OYI anchoring suspension clamp J hook is durable and of good quality, making it a worthwhile choice. It plays an important role in many industrial settings. The main material of the OYI anchoring suspension clamp is carbon steel, with an electro galvanized surface that prevents rust and ensures a long lifespan for pole accessories. The J hook suspension clamp can be used with the OYI series stainless steel bands and buckles to fix cables onto poles, playing different roles in different places. Different cable sizes are available. The OYI anchoring suspension clamp can also be used to link signs and cable installations on posts. It is electro galvanized and can be used outdoors for over 10 years without rusting. It has no sharp edges, with rounded corners, and all items are clean, rust free, smooth, and uniform throughout, free from burrs. It plays a huge role in industrial production.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
