Non-metallic Central Tube Access Cable

Access Optical Fibre Cable

Non-metallic Central Tube Access Cable

The fibers and water-blocking tapes are positioned in a dry loose tube. The loose tube is wrapped with a layer of aramid yarns as a strength member. Two parallel fiber-reinforced plastics (FRP) are placed on the two sides, and the cable is completed with an outer LSZH sheath.


Product Detail

FAQ

Product Tags

Product Features

Small outer diameter, light weight.

Resistant to high and low temperature cycles, resulting in anti-aging and a longer lifespan.

Excellent mechanical performance.

Excellent temperature performance.

Excellent flame-retardant performance, can be directly accessed from the house.

Optical Characteristics

Fiber Type Attenuation 1310nm MFD

(Mode Field Diameter)

Cable Cut-off Wavelength λcc(nm)
@1310nm(dB/KM) @1550nm(dB/KM)
G652D ≤0.36 ≤0.22 9.2±0.4 ≤1260
G657A1 ≤0.36 ≤0.22 9.2±0.4 ≤1260
G657A2 ≤0.36 ≤0.22 9.2±0.4 ≤1260
G655 ≤0.4 ≤0.23 (8.0-11)±0.7 ≤1450
50/125 ≤3.5 @850nm ≤1.5 @1300nm / /
62.5/125 ≤3.5 @850nm ≤1.5 @1300nm / /

Technical Parameters

Fibre Count Cable Diameter
(mm) ±0.3
Cable Weight
(kg/km)
Tensile Strength (N) Crush Resistance (N/100mm) Bend Radius (mm)
Long Term Short Term Long Term Short Term Dynamic static
2-12 5.9 40 300 800 300 1000 20D 10D
16-24 7.2 42 300 800 300 1000 20D 10D

Application

Access to the building from the outside, Indoor Riser.

Laying Method

Duct, Vertical drop.

Operating Temperature

Temperature Range
Transportation Installation Operation
   -40℃~+70℃    -5℃~+45℃    -40℃~+70℃

Standard

YD/T 769-2003

PACKING AND MARK

OYI cables are coiled on bakelite, wooden, or ironwood drums. During transportation, the right tools should be used to avoid damaging the package and to handle them with ease. Cables should be protected from moisture, kept away from high temperatures and fire sparks, protected from over-bending and crushing, and protected from mechanical stress and damage. It is not allowed to have two lengths of cable in one drum, and both ends should be sealed. The two ends should be packed inside the drum, and a reserve length of cable not less than 3 meters should be provided.

Loose Tube Non-metallic Heavy Type Rodent Protected

The color of cable markings is white. The printing shall be carried out at intervals of 1 meter on the outer sheath of the cable. The legend for the outer sheath marking can be changed according to the user's requests.

Test report and certification provided.

  • Products Recommended

    • Self-Locking Nylon Cable Ties

      Self-Locking Nylon Cable Ties

      Stainless Steel Cable Ties: Maximum Strength, Unmatched Durability,Upgrade your bundling and fastening solutions with our professional-grade stainless steel cable ties. Engineered for performance in the most demanding environments, these ties offer superior tensile strength and exceptional resistance to corrosion, chemicals, UV rays, and extreme temperatures. Unliked plastic ties that become brittle and fail, our stainless-steel ties provide a permanent, secure, and reliable hold. The unique, self-locking design ensures a quick and easy installation with a smooth, positive-locking action that won’t slip or loosen over time.
    • Self-supporting  Figure 8  Fiber Optic Cable

      Self-supporting Figure 8 Fiber Optic Cable

      The 250um fibers are positioned in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire is located in the center of the core as a metallic strength member. The tubes (and fibers) are stranded around the strength member into a compact and circular cable core. After an Aluminum (or steel tape) Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of the cable, accompanied by the stranded wires as the supporting part, is completed with a polyethylene (PE) sheath to form a figure 8 structure. Figure 8 cables, GYTC8A and GYTC8S, are also available upon request. This type of cable is specifically designed for self-supporting aerial installation.
    • 8 Cores Type OYI-FAT08G Terminal Box

      8 Cores Type OYI-FAT08G Terminal Box

      The 8-core OYI-FAT08G optical terminal box mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and  aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The  OYI-FAT08G optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optic lines are very clear, making it convenient to operate and maintain. It can also accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with a capacity of 1*8 mini PLC splitter to accommodate the expansion of the box’s usage.
    • OYI I Type Fast Connector

      OYI I Type Fast Connector

      SC field assembled melting free physical connector is a kind of quick connector for physical connection. It uses special optical silicone grease filling to replace the easy-to-lose matching paste. It is used for quick physical connection (not matching paste connection) of small equipment. It is matched with a group of optical fiber standard tools. It is simple and accurate to complete the standard end of optical fiber and reaching the physical stable connection of optical fiber. The assembly steps are simple and low skills required. the connection success rate of our connector is nearly 100%, and the service life is more than 20 years.
    • OPERATING MANUAL

      OPERATING MANUAL

      Rack Mount fiber optic MPO patch panel is used for connection, protection and management on trunk cable and fiber optic. And popular in Data center, MDA, HAD and EDA on cable connection and management. Be installed in 19-inch rack and cabinet with MPO module or MPO adapter panel.It can also use widely in Optical fiber communication system, Cable television system, LANS, WANS, FTTX. With material of cold rolled steel with Electrostatic spray, good looking and sliding-type ergonomic design.
    • OYI-NOO1 Floor-Mounted Cabinet

      OYI-NOO1 Floor-Mounted Cabinet

      Frame: Welded frame, stable structure with precise craftsmanship.

    If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.

    Facebook

    YouTube

    YouTube

    Instagram

    Instagram

    LinkedIn

    LinkedIn

    tiktok

    Tiktok

    Tiktok

    Whatsapp

    +8618926041961

    Email

    sales@oyii.net