GJPFWQH Fiber Optic Cable

Easy branches indoor riser cable uses several Micro-module as optical communication medium. Widely used in Metro ODN network especially inside buildings which have multi-floors and rooms and two parallel fiber reinforce plastics are its strength member,

a ripcord and Extract able easy strip fiber unit are protected by LSZH sheath.

Micro-module is easy in stripping to get the fibers and easy drawing out from the windows cut on the cable sheath, with a color stripe embedded.

Product Detail

FAQ

Product Tags

Specifications

1.Fiber & Micro-module color code

Fiber color

No	1	2	3	4
Color	Blue	Orange	Green	Brown

No. of Micro modules: 1~18

No	1	2	3	4	5	6
Color	Blue	Orange	Green	Brown	Gray	White
No	7	8	9	10	11	12
Color	Red	Black	Yellow	Violet	Pink	Aqua
No	13	14	15	16	17	18
Color	Blue*	Orange*	Green*	Brown*	Gray*	White*

Note: The micro modules from 13 to 18 will be marked with a tracer.

2. Optical fiber type and properties

Item		Unit	Specification
Item		Unit	G. 657A2
Mode field diameter	1310nm	μm	8.6 ± 0.4
Cladding diameter		μm	125.0 ± 0.7

Item		Unit	Specification
Item		Unit	G. 657A2

			≤1.0
Core concentricity error		μm	≤0.5
Coating diameter		μm	245 ± 5
Coating/cladding concentricity error		μm	≤12
Cable cut-off wavelength		nm	≤ 1260
Attenuation Coefficient	1310nm	dB/km	≤0.35
Attenuation Coefficient	1550nm	dB/km	≤0.21
Macro-bend loss (1 turn,7.5mm radius)	1550nm	dB	≤0.5
Macro-bend loss (1 turn,7.5mm radius)	1625nm	dB	≤1.0
Proof stress level		kpsi	≥100

3.Cable structure and parameter

Item		Parameters
No. of fibers	Count	12	24	36	48	72
Fibers per micro-module	Count	4
Micro-module	Count	3	6	9	12	18
Micro-module	Material	LSZH
Micro-module	Diameter	0.9±0.15mm
Strength member	Material	FRP
Outer jacket	Diameter	7.2±0.5mm	7.2±0.5mm	8.3±0.5mm	8.8±0.5mm	9.5±0.5mm
	Material	LSZH
	Color	Pink or Customer’s request
Cable weight (Approx.)		48kg/km	50 kg/km	62 kg/km	68 kg/km	78 kg/km
Color stripe	Number	1 pc
Color stripe	Color	Blue	Blue	Green	Black	Brown
Tensile performance	Short term	300N
Crush	Short term	1000N/100mm
Cable attenuation		≤ 0.36dB/km at 1310nm, ≤ 0.23 dB/km at 1550nm

Characteristic of Optical Cable

1. Min. bending radius

Static: 10 x cable diameter

Dynamic: 20 x cable diameter

2.Application temperature range

Operation: -15℃ ~ +60℃

Installation: -5℃ ~ +50℃

Storage/transportation: -40℃ ~ +70℃

3.Main mechanical & environmental performance test

Item

Test Method

Acceptance Condition

Tensile Strength

IEC 60794-1-21-E1

- Load: Short term tension

- Length of cable: ≥50m

- Load time: 5min

- Fiber strain ≤ 0.5%

- No fiber breakage and no sheath damage.

Crush Test

IEC 60794-1-21-E3

- Load: Short term crush

- Load time: 1min

- No fiber breakage and no sheath damage.

Kink

IEC 60794-1-21-E10

- Loop diameter: 20x OD

- No kink occurs.

Cable bend

IEC 60794-1-21-E11

-Diameter of mandrel: 20x OD

-Number of turns: 4

-Number of cycles: 3

- No fiber breakage and no sheath damage.

Temperature Cycling IEC 60794-1-22-F1

- Temperature: -15℃~+60℃

- Time of each step: 12h

- Number of cycle: 2

- Loss change ≤ 0. 1dB/km@1550nm.

- No fiber break and no sheath damage.

Products Recommended

LC Type

Fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link fiber optic cables or fiber optic connectors between two fiber optic lines. It contains the interconnect sleeve that holds two ferrules together. By precisely linking two connectors, fiber optic adapters allow the light sources to be transmitted at their maximum and minimize the loss as much as possible. At the same time, fiber optic adapters have the advantages of low insertion loss, good interchangeability, and reproducibility. They are used to connect optical fiber connectors such as FC, SC, LC, ST, MU, MTRJ, D4, DIN, MPO, etc. They are widely used in optical fiber communications equipment, measuring appliances, and so on. The performance is stable and reliable.

VIEW MORE
OYI-FAT08 Terminal Box

The 8-core OYI-FAT08A optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.

VIEW MORE
OYI-FAT16D Terminal Box

The 16-core OYI-FAT16D optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.

VIEW MORE
OYI-FAT12B Terminal Box

The 12-core OYI-FAT12B optical terminal box performs in accordance with the industry-standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The OYI-FAT12B optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optic lines are very clear, making it convenient to operate and maintain. There are 2 cable holes under the box that can accommodate 2 outdoor optical cables for direct or different junctions, and it can also accommodate 12 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with a capacity of 12 cores to accommodate the expansion of the box’s usage.

VIEW MORE
Double FRP reinforced non-metallic central bund...

The structure of the GYFXTBY optical cable consists of multiple (1-12 cores) 250μm colored optical fibers (single-mode or multimode optical fibers) that are enclosed in a loose tube made of high-modulus plastic and filled with waterproof compound. A non-metallic tensile element (FRP) is placed on both sides of the bundle tube, and a tearing rope is placed on the outer layer of the bundle tube. Then, the loose tube and two non-metallic reinforcements form a structure that is extruded with high-density polyethylene (PE) to create an arc runway optical cable.

VIEW MORE
OPGW Optical Ground Wire

The central tube OPGW is made of stainless steel (aluminum pipe) fiber unit in the center and aluminum clad steel wire stranding process in the outer layer. The product is suitable for the operation of single tube optical fiber unit.

VIEW MORE

If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.

INQUIRE