0755-23179541 
sales@oyii.net.png)
8618926041961
OYI 321GER
XPON ONU
OYI 321GER
Product Features
1. Comply fully with ITU-G.984.1/2/3/4 standard and G.987.3 protocol.
2. Support downlink 2.488 Gbits/s rate and uplink 1.244 Gbits/s rate.
3. Support bidirectional FEC and RS (255,239) FEC CODEC.
4. Support 16+1 TCONT and 32+1 GEMPORT.
5. Support AES128 decryption function of G.984 standard.
6. Support SBA and DBA dynamically broadband allocation.
7. Support the PLOAM function of G.984 standard.
8. Support Dying-Gasp check and report.
9. Support synchronous Ethernet.
10. Good inter-working with the OLT from different manufacturers，such as HUAWEI, ZTE, Broadcom etc.
11. Down-link LAN ports:1*10/100M with auto-negotiation 1*10/100/1000M with auto-negotiation.
12. Support the rogue ONU alarm function.
13. Support multiple VLAN function.
14. Operation mode: HGU option.
15. Support IEEE802.11b/g/n standard for WIFI.
16. Double antennas: external box with 5DBi.
17. Support of 300Mbps PHY rate.
18. Support multiply SSID.
19. Multiple encryption methods :WFA、WPA、WPA2、WAPI.
20. Support TR069, NAT, DMZ, DNS features.
21. Support Bridge, PPPOE, DHCP and Static IP configuration for WAN interface.
22. Support IP, MAC Filtering, Firewall Functionality in routed mode.
Specification
|
Tech parameters |
Description |
|
|
1 |
Up-link interface |
1 XPON interface，SC single mode single fiber RX 2.488 Gbits/s rate and TX 1.244 Gbits/s rate Fiber type：SC/APC Optical power：0~4 dBm Sensitivity：-28 dBm safety: ONU authentication mechanism |
|
2 |
Wavelength(nm) |
TX 1310nm，RX 1490nm |
|
3 |
Fiber connector |
SC/APC connector |
|
4 |
Down-link data interface |
1*10/100Mbps and 1*10/100/1000M auto-negotiation Ethernet interface, RJ45 interface |
|
5 |
Indicator LED |
9pcs，refer to NO.6 definition of indicator LED |
|
6 |
DC supply interface |
input＋12V 1A，footprint：DC0005 ø2.1MM |
|
7 |
Power |
≤5W |
|
8 |
Operating temperature |
-5～+55℃ |
|
9 |
Humidity |
10～85%（non-condensation） |
|
10 |
Storage temperature |
-30～+70℃ |
|
11 |
Dimension（MM） |
155*92*32mm（mainframe） |
|
12 |
Weight |
0.38Kg（mainframe） |
1.WIFI Characteristics
|
Tech features |
Description |
|
|
1 |
Antenna |
2T2R Mode 5DBI Gain, Frequency:2.4G |
|
2 |
Rate |
WIFI4 wireless speed of 300Mbps, with 13 channels; |
|
3 |
Encryption methods |
WFA、WPA、WPA2、WAPI |
|
4 |
Transmission power |
WiFi4 17dBm； |
|
5 |
Receiving sensitivity |
WiFi4-59dBm @ channel 11, MCS7 |
|
6 |
WPS feature |
support |
Installation and Initialization
1.Insert SC/APC fiber patch cord or pigtail into PON interface of the product.
2.Use the network untwised-pair from network equipment to the Lan Interface of product, the LAN interface of this product supports the AUTO-MDIX function.
3.Offer product power, please use the DC plug of adapter to connect with the DC socket of the product, and the AC plug of the power adapter should be plugged into the AC socket.
4.The power will be connected successfully if the PWR indicator ON, the system will be into initial stage, and then, to wait for the completion of system initialization.
Definition of indicator LED
|
Symbol |
Color |
Meaning |
|
PWR |
Green |
ON: successfully connect with power OFF: fail to connect with power |
|
PON |
Green |
ON: ONU port link correctly Flicker: PON registering OFF: ONU ports link link faulty |
|
LAN |
Green |
ON: Link up correctly Flicker: data is transmitting OFF: link down faulty |
|
WIFI |
Green |
ON: WIFI is running OFF: WIFI startup fail |
|
LOS |
Red |
Flicker: fail to connect with PON port OFF: detected fiber to input |
|
WAN |
Green |
ON: link to Internet success OFF: link to Internet fail |
Packing list
|
Name |
Quantity |
Unit |
|
XPON ONU |
1 |
pcs |
|
Supply Power |
1 |
pcs |
|
Manual & Warranty Card |
1 |
pcs |
Order information
|
Product Model |
Function and LAN |
LAN Ports |
Type of Fiber |
Default Mode |
|
OYI 323GER |
1GE+1FEI 1VOIP |
2LAN，1GE +1FE RJ45 |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
OYI 321GER |
1GE+1FE 2.4 G WIFI |
2LAN，1GE +1FE RJ45 |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
OYI 3213GER |
1GE+1FE 2.4 G WIFI 1 VOIP |
2LAN，1GE +1FE RJ45 |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
OYI 3212GDER |
1GE+1FE 2.4 G WIFI 1 WDM CATV |
2LAN，1GE +1FE RJ45 |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
OYI 32123GDER |
1GE+1FE 2.4 G WIFI 1 VOIP 1 WDM CATV |
2LAN，1GE +1FE RJ45 |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
ONU Weight
|
Product Form |
Product Model |
Weight (kg) |
Bare Weight （kg) |
Dimension |
Carton |
Product Description |
|||
|
Product: （mm） |
Package： (mm) |
Carton size:(cm) |
Number |
Weight (kg) |
|||||
|
2 Ports ONU |
OYI 323GER |
0.3 |
0.15 |
108*85*25 |
146*117*66 |
45.9*42*34.2 |
40 |
13.6 |
1GE 1FE VOIP |
|
2 Ports ONU |
OYI 321GER |
0.38 |
0.18 |
155*92*32 |
220*160*38 |
49.5*48*37.5 |
50 |
20.3 |
1GE 1FE WIFI |
|
2 Ports ONU |
OYI 3213GER |
0.38 |
0.18 |
155*92*32 |
220*160*38 |
49.5*48*37.5 |
50 |
20.3 |
1GE 1FE WIFI, VOIP |
|
2 Ports ONU |
OYI 3212GDER |
0.38 |
0.18 |
155*92*32 |
220*160*38 |
49.5*48*37.5 |
50 |
20.3 |
1GE 1FE WIFI, CATV |
|
2 Ports ONU |
OYI 32123GDER |
0.38 |
0.18 |
155*92*32 |
220*160*38 |
49.5*48*37.5 |
50 |
20.3 |
1GE 1FE WIFI, VOIP, CATV |
-
Loose Tube Non-metallic & Non-armored Fibe...
The structure of the GYFXTY optical cable is such that a 250μm optical fiber is enclosed in a loose tube made of high modulus material. The loose tube is filled with waterproof compound and water-blocking material is added to ensure longitudinal water-blocking of the cable. Two glass fiber reinforced plastics (FRP) are placed on both sides, and finally, the cable is covered with a polyethylene (PE) sheath through extrusion. -
OYI-FAT-10A Terminal Box
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.The fiber splicing,splitting,distribution can be done in this box,and meanwhile it provides solid protection and management for the FTTx network building. -
All Dielectric Self-Supporting Cable
The structure of ADSS (single-sheath stranded type) is to place 250um optical fiber into a loose tube made of PBT, which is then filled with waterproof compound. The center of the cable core is a non-metallic central reinforcement made of fiber-reinforced composite (FRP). The loose tubes (and filler rope) are twisted around the central reinforcing core. The seam barrier in the relay core is filled with water-blocking filler, and a layer of waterproof tape is extruded outside the cable core. Rayon yarn is then used, followed by extruded polyethylene (PE) sheath into the cable. It is covered with a thin polyethylene (PE) inner sheath. After a stranded layer of aramid yarns is applied over the inner sheath as a strength member, the cable is completed with a PE or AT (anti-tracking) outer sheath. -
Fanout Multi-core (4~48F) 2.0mm Connectors Patc...
OYI fiber optic fanout patch cord, also known as a fiber optic jumper, is composed of a fiber optic cable terminated with different connectors on each end. Fiber optic patch cables are used in two major application areas: computer workstations to outlets and patch panels or optical cross-connect distribution centers. OYI provides various types of fiber optic patch cables, including single-mode, multi-mode, multi-core, armored patch cables, as well as fiber optic pigtails and other special patch cables. For most patch cables, connectors such as SC, ST, FC, LC, MU, MTRJ, and E2000 (APC/UPC polish) are all available. -
OYI-FAT08D Terminal Box
The 8-core OYI-FAT08D optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The OYI-FAT08D optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. It can accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 8 cores capacity specifications to meet the expansion needs of the box. -
Stay Rod
This stay rod is used to connect the stay wire to the ground anchor, also known as the stay set. It ensures that the wire is firmly rooted to the ground and everything remains stable. There are two types of stay rods available in the market: the bow stay rod and the tubular stay rod. The difference between these two types of power-line accessories is based on their designs.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
