0755-23179541 
sales@oyii.net.png)
8618926041961
3436G4R
XPON ONU WIFI 6 DUAL BAND
3436G4R
Product Description
ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, ONU is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON REALTEK chipset and has high reliability， easy management， flexible configuration，robustness，good quality service guarantee(Qos).
This ONU supports IEEE802.11b/g/n/ac/ax, called WIFI6, concurrently, a WEB system provided simplifies the configuration of the WIFI and connects to INTERNET conveniently for users.
The ONU supports one pots for VOIP application.
Product Features
1. comply fully with ITU-G.987.3 standard and OMCI full with ITU-G.988.
2. support downlink 2.488 Gbits/s 2. 2. rate and uplink 1.244 Gbits/s rate.
3. support download RS (248,216) FEC and uplink RS (248,232) FEC CODEC.
4. support 32 TCONT and 256 GEM-port-ID or XGEM-port-ID.
5. support AES128 decryption/ encryption function.
6. support the PLOAM function of G.988 standard.
7. support Dying-Gasp check and report.
8. good interworking with the OLT from different manufacturers，such as HuaWei ,ZTE etc.
9. down-link LAN ports: 4*GE or 1*2.5GE+3*GE with auto-negotiation.
10. Support VLAN function.
11. support IEEE802.11b/g/n, IEEE802.11ac and IEEE802.11ax standard for WIFI.
12. antennas gain: 5DBi with external.
13. support: the Max PHY rate is 2975.5Mbps (AX3000).
14. Multiple encryption methods: WPA、WPA2、WAP3.
15. one port for VOIP, SIP protocol optional.
16. one USB port.
17. better speed and lower latency gaming effects.
Specification
|
Tech Parameters |
Description |
|
Up-link interface |
1 XPON interface，SC single mode single fiber RX 2.488 Gbits/s rate and TX 1.244 Gbits/s rate Fiber type：SC/APC Optical power：0~4 dBm Sensitivity：-28 dBm safety: ONU authentication mechanism |
|
Wavelength(nm) |
TX 1310 ± 10nm，RX 1490 ± 3nm |
|
Fiber connector |
SC/APC or SC/UPC connector |
|
Down-link data interface |
4*GE or 1*2.5GE+3*GE auto-negotiation Ethernet interface, RJ45 interface |
|
Indicator LED |
10 pcs，refer to NO.6 definition of indicator LED |
|
DC supply interface |
Input＋12V 1.0A，footprint：DC0005 ø2.1MM |
|
Power |
≤10W |
|
Operating temperature |
-5～+55℃ |
|
Humidity |
10～85%（non-condensation） |
|
Storage temperature |
-30～+60℃ |
|
Dimension（MM） |
185*125*32mm（mainframe） |
|
Weight |
0.5Kg（mainframe） |
WIFI Characteristics
|
Tech Features |
Description |
|
Antenna |
2.4G 2T3R 5G 2T2R ；external，5DBI gain |
|
Protocol |
2.4G IEEE802.11b/g/n/ax 5G IEEE802.11ac/ax |
|
Rate |
2.4G Max PHY rate 573.5Mbp，5G Max PHY rate 2402Mbps |
|
Encryption methods |
WEP,WPA2，WPA3 |
|
Tx power |
17.5dbm@-43DB DEVM HE40 MCS11； 18dbm@-43DB DEVM HE80/160 MCS10/11； |
|
MU-MIMO |
2.4G 802.11ax with OFDMA and MU-MIMO 5G 802.11ax with OFDMA and MU-MIMO ,802.11ac with wave2 MU-MIMO |
|
Rx sensitivity |
5G -45dBm@160Mhz bandwidth 1024QAM; 2.4G-51<Bm@40Mhzbandwidth 1024QAM |
|
WPS function |
Support |
VOIP Technical features
|
Tech features |
description |
|
Voltage and Current Monitoring |
The ONU continuously monitors the TIP, RING, and battery voltages and currents via an on-chip Monitor ADC |
|
Power Monitoring and Power Fault Detection |
The ONU monitoring functions are used to continuously protect against excessive power conditions |
|
Thermal Overload Shutdown |
If the die temperature exceeds the maximum junction temperature threshold, the device will shut itself down |
|
Default configuration |
Protocol: SIP; Codec type selection: G722, G729, G711A, G711U, FAX: support（the default configuration is disable）; |
Definition of Indicator LED
|
Symbol |
Color |
Meaning |
|
PWR |
Green |
ON: successfully connect with power OFF: fail to connect with power |
|
PON |
Green |
ON: ONU port Link UP correctly Flicker: PON registering OFF: ONU ports link down faulty |
|
LAN |
Green |
ON/ Flicker: Link up correctly OFF: link down faulty |
|
TEL |
Green |
ON: Register success OFF: Register fail OFF: |
|
2.4G/5G |
Green |
ON: WIFI is running OFF: WIFI startup fail |
|
LOS |
Red |
Flicker: Detected optical input OFF: detected fiber to input |
Packing list
|
Name |
Quantity |
Unit |
|
XPON ONU |
1 |
pcs |
|
Supply Power |
1 |
pcs |
|
Manual & Warranty Card |
1 |
pcs |
Ordering Information
|
Model NO. |
Function and Interface |
Type of Fiber |
Default Communication Mode |
|
OYI346G4R |
wifi6 3000M AX 2.4G & 5G 4*4 MIMO |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
OYI3436G4R |
wifi6 3000M AX 2.4G & 5G 1 VIOP 4*4 MIMO |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
OYI3426G4DER |
wifi6 3000M AX 2.4G & 5G 1 WDM CATV 4*4 MIMO |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
OYI34236G4DER |
wifi6 3000M AX 2.4G & 5G 1 VIOP 1 WDM CATV 4*4 MIMO |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
ONU Weight Table
|
Product form
|
Model NO.
|
Weigh t(kg)
|
Bare weight （kg)
|
Size |
Carton |
|||
|
Product: （mm） |
Package： (mm) |
Carton size |
Quantity |
Weight (kg) |
||||
|
4LAN ONU |
OYI346G4R |
0.40 |
0.20 |
168*110*3 6 |
215*200*4 3 |
49.5*48*37. 5 |
36 |
15.7 |
|
4LAN ONU |
OYI3436G4R |
0.50 |
0.20 |
168*110*3 6 |
215*200*4 3 |
49.5*48*37. 5 |
28 |
15.4 |
|
4LAN ONU |
OYI3426G4DER |
0.50 |
0.30 |
168.110*36 |
215*200*4 3 |
57.5*50.32. 5 |
32 |
17.2 |
|
4LAN ONU |
OYI34236G4DE R |
0.50 |
0.30 |
168.110*36 |
215*200*4 3 |
51*49*44 |
40 |
21.2 |
-
Fiber Plastic Cable Storage F Type
Fiber Storage Units are used to store coil an overplus length of cable. It can be independent used or paired units .(use hanger brackets mount on stand or pole), Material are constructed from PP. Cable can be storage alone inside round chanel or oval round chanel.The channel is designed to tie the cable and coil it, ice and water leaf was also be designed. It can be hanger on steel wire. hanging part (bolts, nuts, washers)and strand clamps all included cable can be easy to tie wrap in slot the channel for securing constructed from PP material . UV material also can be use if need. -
3213GER
ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, ONU is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON Realtek chip set and has high reliability， easy management，flexible configuration，robustness，good quality service guarantee(Qos).ONU adopts RTL for WIFI application that supports IEEE802.11b/g/n standard at the same time，a WEB system provided simplifies the configuration of the ONU and connects to INTERNET conveniently for users.XPON has G / E PON mutual conversion function, which is realized by pure software.ONU support one pots for VOIP application. -
GJYFKH
-
SFP-ETRx-4
OPT-ETRx-4 Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the Gigabit Ethernet standards as specified in IEEE STD 802.3. The 10/100/1000 BASE-T physical layer IC (PHY) can be accessed via 12C, allowing access to all PHY settings and features. The OPT-ETRx-4 is compatible with 1000BASE-X auto-negotiation, and have a link indication feature. PHY is disabled when TX disable is high or open. -
OYI-ODF-SR-Series Type
The OYI-ODF-SR-Series type optical fiber cable terminal panel is used for cable terminal connection and can also be used as a distribution box. It has a 19″ standard structure and is rack-mounted with a drawer structure design. It allows for flexible pulling and is convenient to operate. It is suitable for SC, LC, ST, FC, E2000 adapters, and more. The rack mounted optical cable terminal box is a device that terminates between the optical cables and the optical communication equipment. It has the functions of splicing, termination, storing, and patching of optical cables. The SR-series sliding rail enclosure allows for easy access to fiber management and splicing. It is a versatile solution available in multiple sizes (1U/2U/3U/4U) and styles for building backbones, data centers, and enterprise applications. -
SC Type
Fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link fiber optic cables or fiber optic connectors between two fiber optic lines. It contains the interconnect sleeve that holds two ferrules together. By precisely linking two connectors, fiber optic adapters allow the light sources to be transmitted at their maximum and minimize the loss as much as possible. At the same time, fiber optic adapters have the advantages of low insertion loss, good interchangeability, and reproducibility. They are used to connect optical fiber connectors such as FC, SC, LC, ST, MU, MTRJ, D4, DIN, MPO, etc. They are widely used in optical fiber communications equipment, measuring appliances, and so on. The performance is stable and reliable.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
