0755-23179541 
sales@oyii.net.png)
8618926041961
XPON ONU
XPON ONU
1G3F WIFI PORTS
Product Description
1G3F WIFI PORTS is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier class FTTH application provides data service access. 1G3F WIFI PORTS is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it can access to the EPON OLT or GPON OLT.1G3F WIFI PORTS adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
1G3F WIFI PORTS is compliant with IEEE802.11n STD, adopts with 2x2 MIMO, the highest rate up to 300Mbps. 1G3F WIFI PORTS is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.1G3F WIFI PORTS is designed by ZTE chipset 279127.
Product Features
1. Supports Dual Mode (can access GPON/EPON OLT).
2. Supports GPON G.984/G.988 standards.
3. Support SIP Protocol for VoIP Service.
4. Integrated line testing compliant with GR-909 on PORTS.
5. Support 802.11n WIFI (2x2 MIMO) function.
6. Support NAT, Firewall function.
7. Support Flow & Storm Control, Loop Detection, Port Forwarding and Loop-Detect.
8. Support port mode of VLAN configuration.
9. Support LAN IP and DHCP Server configuration.
10. Support TR069 Remote Configuration and WEB Management.
11. Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode.
12. Support IPv4/IPv6 dual stack.
13. Support IGMP transparent/snooping/proxy.
14. In compliant with IEEE802.3ah standard.
15. Compatible with popular OLT (HW, ZTE...).
Specification
|
Technical Item
|
Details
|
|
PON interface
|
E/GPON port (EPON PX20+ and GPON Class B+)Upstream: 1310nm; Downstream: 1490nmSC/APC connectorReceiving sensitivity: ≤-28dBmTransmitting optical power: 0.5～+4dBmTransmission distance: 20KM
|
|
LAN interface
|
1x10/100/1000Mbps and 3x10/100Mbps autoFull/Half, RJ45 connector
|
|
WIFI interface
|
adaptiveEthernetinterfaces.Compliant with IEEE802.11b/g/nOperating frequency: 2.400 - 2.4835GHz support MIMO, rate up to 300Mbps2T2R, 2 external antenna 5dBiSupport: Multiple SSIDChannel:13Modulation type: DSSS、CCK and OFDMEncoding scheme: BPSK、QPSK、16QAM and 64QAM
|
|
PORTS Port
|
RJ11Max 1km distanceBalanced Ring, 50V RMS
|
|
LED
|
10 LED, for Status of WIFI、WPS、PWR、LOS、PON、LAN1 - LAN4、FXS
|
|
Push - Button
|
3, for Function of Power on/off, Reset, WPS
|
|
Operating condition
|
Temperature: 0℃～+50℃Humidity: 10%～90% (non - condensing)
|
|
Storing Condition
|
Temperature: - 40℃～+60℃Humidity: 10%～90% (non - condensing)
|
|
Power supply
|
DC 12V/1A
|
|
Power Consumption
|
≤6W
|
|
Net Weight
|
≤0.4Kg
|
Panel lights and Introduction
|
Pilot Lamp |
Status |
Description |
|
WIFI |
On |
The WIFI interface is up. |
|
Blink |
The WIFI interface is sending or/and receiving data (ACT). |
|
|
Off |
The WIFI interface is down. |
|
|
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
|
Off |
The WIFI interface does not establish a secure connection. |
|
|
PWR |
On |
The device is powered up. |
|
Off |
The device is powered down. |
|
|
LOS |
Blink |
The device doses not receive optical signals or with low signals. |
|
Off |
The device has received optical signal. |
|
|
PON |
On |
The device has registered to the PON system. |
|
Blink |
The device is registering the PON system. |
|
|
Off |
The device registration is incorrect. |
|
|
LAN1~LAN4 |
On |
Port (LANx) is connected properly (LINK). |
|
Blink |
Port (LANx) is sending or/and receiving data (ACT). |
|
|
Off |
Port (LANx) connection exception or not connected. |
|
|
FXS |
On |
Telephone has registered to the SIP Server. |
|
Blink |
Telephone has registered and data transmission (ACT). |
|
|
Off |
Telephone registration is incorrect. |
Ordering information
|
Product Name |
Product Model |
Descriptions |
|
1G3F WIFI PORTS XPON |
ZX1014R127 |
1*10/100/1000M and 3*10/100M Ethernet interface, 1 GPON interface, 1 PORT interface, support Wi-Fi function, Plastic casing, external power supply adapter |
Application
Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home).
Typical Service：Broadband Internet access, IPTV, VoIP etc.
-
Loose Tube Corrugated Steel/Aluminum Tape Flame...
The fibers are positioned in a loose tube made of PBT. The tube is filled with a water-resistant filling compound, and a steel wire or FRP is located in the center of the core as a metallic strength member. The tubes (and the fillers) are stranded around the strength member into a compact and circular core. The PSP is longitudinally applied over the cable core, which is filled with filling compound to protect it from water ingress. Finally, the cable is completed with a PE (LSZH) sheath to provide additional protection. -
OYI J Type Fast Connector
Our fiber optic fast connector, the OYI J type, is designed for FTTH (Fiber to The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly that provides open flow and precast types, meeting the optical and mechanical specifications of standard optical fiber connectors. It is designed for high quality and high efficiency during installation.Mechanical connectors make fiber terminations quick, easy, and reliable. These fiber optic connectors offer terminations without any hassle and require no epoxy, no polishing, no splicing, and no heating, achieving similar excellent transmission parameters as standard polishing and splicing technology. Our connector can greatly reduce the assembly and setup time. The pre-polished connectors are mainly applied to FTTH cables in FTTH projects, directly at the end-user site. -
SC/APC SM 0.9mm Pigtail
Fiber optic pigtails provide a quick way to create communication devices in the field. They are designed, manufactured, and tested according to protocols and performance standards set by the industry, which will meet your most stringent mechanical and performance specifications. A fiber optic pigtail is a length of fiber cable with only one connector fixed on one end. Depending on the transmission medium, it is divided into single mode and multi mode fiber optic pigtails; according to the connector structure type, it is divided into FC, SC, ST, MU, MTRJ, D4, E2000, LC, etc. according to the polished ceramic end-face, it is divided into PC, UPC, and APC. Oyi can provide all kinds of optic fiber pigtail products; the transmission mode, optical cable type, and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability, and customization, it is widely used in optical network scenarios such as central offices, FTTX, and LAN, etc. -
Armored Optic Cable GYFXTS
Optical fibers are housed in a loose tube that is made of high-modulus plastic and filled with water blocking yarns. A layer of non-metallic strength member is stranding around the tube, and the tube is armored with the plastic coated steel tape. Then a layer of PE outer sheath is extruded. -
OPGW Optical Ground Wire
Layered stranded OPGW is one or more fiber-optic stainless steel units and aluminum-clad steel wires together, with stranded technology to fix the cable, aluminum-clad steel wire stranded layers of more than two layers, the product features can accommodate multiple fiber-optic unit tubes, fiber core capacity is large. At the same time, the cable diameter is relatively large, and the electrical and mechanical properties are better. The product features light weight, small cable diameter and easy installation. -
Zipcord Interconnect Cable GJFJ8V
ZCC Zipcord Interconnect Cable uses 900um or 600um flame-retardant tight buffer fiber as an optical communication medium. The tight buffer fiber is wrapped with a layer of aramid yarn as strength member units, and the cable is completed with a figure 8 PVC, OFNP, or LSZH (Low Smoke, Zero Halogen, Flame-retardant) jacket.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
