Direct Bury (DB) 4-way 14/10mm

HDPE Tube Bundle

Direct Bury (DB) 4-way 14/10mm

A bundle of micro- or mini-tubes with strengthened wall thickness is encased in a single thin HDPE sheath, forming a duct assembly specifically engineered for fiber optical cable deployment. This robust design enables versatile installation—either retrofitted into existing ducts or directly buried underground—supporting seamless integration into fiber optical cable networks.

The micro ducts are optimized for high-efficiency fiber optical cable blowing, featuring an ultra-smooth inner surface with low-friction properties to minimize resistance during air-assisted cable insertion. Each micro duct is color-coded per Figure 1, facilitating quick identification and routing of fiber optical cable types (e.g., single-mode, multi-mode) during network installation and maintenance.

Product Detail

FAQ

Product Tags

Product Features

The dimension of tube bundle shall be:

1)	Inner Micro Duct:	14/10mm
2)	Outer Diameter:	30.4mm * 30.4mm (±0.5mm)
3)	Thickness of sheathing:	1.2mm

（Figure 1）

Remarks: Ripcord is optional.

Raw materials:

HDPE of a high-molecular type with the following parameters is used for production of the Tube Bundle:

Melt flow index: 0.1 ～ 0.4 g/10 minutes EN ISO 1133

(190 °C, 2.16 KG)

Density: Min. 0.940 g/cm³ ISO 1183

Tensile strength at yield: Min. 20MPa ISO 527

Elongation at the break: Min 350% ISO 527

Environmental stress crack resist (F₅₀) Min. 96 hours ISO 4599

Construction

1.PE sheath: The outer sheath is manufactured from colored HDPE, halogen free. Normal outer sheath color is orange. Other color is possible upon customer request.

2. Micro duct: The micro duct is manufactured from HDPE, extruded from 100% virgin material. The color shall be blue (central duct), red, green, yellow, white, grey, orange or other customized.

Technical Parameters

Table 1: Mechanical performance of inner micro duct Φ14/10mm

Pos.	Mechanical performance	Test conditions	Performance	Standard
1	Tensile strength at yield	Rate of extension: 100mm/min	≥1400N	IEC 60794-1-2 Method E1
2	Crush	Sample length: 250mm Load: 1400N Duration of Max. load: 1 minutes Recovery time: 1 hour	The outer and inner diameter shall show, under visual examination without damage and no reduction of diameter greater than 15%.	IEC 60794-1-2 Method E3
3	Kink	≤140mm	-	IEC 60794-1-2 Method E10
4	Impact	Striking surface radius: 10mm Impact Energy: 1J Number of impact: 3 times Recovery time: 1 hour	Under visual examination, there shall be no damage to the micro duct.	IEC 60794-1-2 Method E4
5	Bend radius	Number of turns: 5 Mandrel diameter: 168mm Number of cycles: 3	The outer and inner diameter shall show, under visual examination without damage and no reduction of diameter greater than 15%.	IEC 60794-1-2 Method E11
6	Friction	/	≤0.1	M-Line

Table 2: Mechanical performance of Tube Bundle

Pos.	Item	Specification
1	Appearance	Smooth outer wall (UV-stabilized) without visible impurities; well-proportioned color, no bubbles or cracks; with defined markings on outer wall.
2	Tensile strength	Use Pull socks to tension a sample in accordance with table below: Sample length: 1m Tensile speed: 20mm/min Load: 4000N Duration of the tension: 5 min.	No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
3	Crush Resistance	A 250mm sample after 1 minute load time and 1 hour recovery time. Load (plate) shall be 2000N. The imprint of the plate on the sheath is not considered as mechanical damage.	No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
Pos.	Item	Specification
4	Impact	Striking surface radius shall be 10mm and impact energy 5J. Recovery time shall be one out. The imprint of the striking surface on the micro duct is not considered as mechanical damage.	No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.
5	Bend	Diameter of mandrel shall be 40X OD of sample, 4 turns, 3 cycles.	No visual damage or residual deformation greater than 15% of the duct assembly outer diameter.

Storage Temperature

Completed packages of the HDPE Tube Bundle on drums can be stored outdoor max. 6 months upon the date of production.

Storage temperature: -40°C ～ +70°C

Installation temperature: -30°C ～ +50°C

Operating temperature: -40°C ～ +70°C

Products Recommended

OYI-OCC-A Type

Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross-connection cabinets will be widely deployed and move closer to the end user.

VIEW MORE
OYI-FAT-10A Terminal Box

The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.The fiber splicing,splitting,distribution can be done in this box,and meanwhile it provides solid protection and management for the FTTx network building.

VIEW MORE
Micro Fiber Indoor Cable GJYPFV(GJYPFH)

The structure of indoor optical FTTH cable is as follows: in the center is the optical communication unit.Two parallel Fiber Reinforced (FRP/Steel wire) are placed on the two sides. Then, the cable is completed with a black or colored Lsoh Low Smoke Zero Halogen (LSZH/PVC) sheath.

VIEW MORE
OYI 321GER

ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, onu is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON Realtek chipset and has high reliability,easy management,flexible configuration，robustness，good quality service guarantee(Qos). ONU adopts RTL for WIFI application that supports IEEE802.11b/g/n standard at the same time，a WEB system provided simplifies the configuration of the ONU and connects to INTERNET conveniently for users. XPON has G / E PON mutual conversion function, which is realized by pure software.

VIEW MORE
OPERATING MANUAL

Rack Mount fiber optic MPO patch panel is used for connection, protection and management on trunk cable and fiber optic. And popular in Data center, MDA, HAD and EDA on cable connection and management. Be installed in 19-inch rack and cabinet with MPO module or MPO adapter panel.It can also use widely in Optical fiber communication system, Cable television system, LANS, WANS, FTTX. With material of cold rolled steel with Electrostatic spray, good looking and sliding-type ergonomic design.

VIEW MORE
Armored Optic Cable GYFXTS

Optical fibers are housed in a loose tube that is made of high-modulus plastic and filled with water blocking yarns. A layer of non-metallic strength member is stranding around the tube, and the tube is armored with the plastic coated steel tape. Then a layer of PE outer sheath is extruded.

VIEW MORE

If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.

INQUIRE