0755-23179541 
sales@oyii.net.png)
8618926041961
OYI 3436G4R
XPON ONU WIFI 6 DUAL BAND Optic Fiber
OYI 3436G4R
Product Features
1.comply fully with ITU-G.987.3 standard and OMCI full with ITU-G.988.
2.support downlink 2.488 Gbits/s rate and uplink 1.244 Gbits/s rate.
3.support download RS (248,216) FEC and uplink RS (248,232) FECCODEC.
4.support 32 TCONT and 256 GEM-port-ID or XGEM-port-ID.
5.support AES128 decryption/ encryption function.
6.support the PLOAM function of G.988 standard.
7.support Dying-Gasp check and report.
8.good interworking with the OLT from different manufacturers，such as HuaWei , ZTE etc.
9.down-link LAN ports: 4*GE or 1*2.5GE+3*GE with auto-negotiation.
10.Support VLAN function.
11.support IEEE802.11b/g/n, IEEE802.11ac and IEEE802.11ax standard for WIFI.
12.antennas gain: 5DBi with external.
13.support: the Max PHY rate is 2975.5Mbps（AX3000）.
14.Multiple encryption methods: WPA、WPA2、WAP3..
15.one port for VOIP, SIP protocol optional.
16.one USB port.
17.better speed and lower latency gaming effects.
Specification
|
Tech Parameters |
Description |
|
Up-link interface |
1 XPON interface，SC single mode single fiber RX 2.488 Gbits/s rate and TX 1.244 Gbits/s rate Fiber type：SC/APC Optical power：0~4 dBm Sensitivity：-28 dBm safety: ONU authentication mechanism |
|
Wavelength(nm) |
TX 1310 ± 10nm，RX 1490 ± 3nm |
|
Fiber connector |
SC/APC or SC/UPC connector |
|
Down-link data interface |
4*GE or 1*2.5GE+3*GE auto-negotiation Ethernet interface, RJ45 interface |
|
Indicator LED |
10 pcs，refer to NO.6 definite of indicator LED |
|
DC supply interface |
Input+12V 1.0A，footprint：DC0005 ø2.1MM |
|
Power |
≤10W |
|
Operating temperature |
-5～+55℃ |
|
Humidity |
10～85%（non-condensation） |
|
Storage temperature |
-30～+60℃ |
|
Dimension（MM） |
185*125*32mm（mainframe） |
|
Weight |
0.5Kg（mainframe） |
WIFI Characteristics
|
Tech Features |
Description |
|
Antenna |
2.4G 2T3R 5G 2T2R ；external，5DBI gain |
|
Protocol |
2.4G IEEE802.11b/g/n/ax 5G IEEE802.11ac/ax |
|
Rate |
2.4G Max PHY rate 573.5Mbp，5G Max PHY rate 2402Mbps |
|
Encryption methods |
WEP,WPA2，WPA3 |
|
Tx power |
17.5dbm@-43DB DEVM HE40 MCS11； 18dbm@-43DB DEVM HE80/160 MCS10/11； |
|
MU-MIMO |
2.4G 802.11ax with OFDMA and MU-MIMO 5G 802.11ax with OFDMA and MU-MIMO ,802.11ac with wave2 MU-MIMO |
|
Rx sensitivity |
5G -45dBm@160Mhz bandwidth 1024QAM; 2.4G-51dBm@40Mhz bandwidth 1024QAM; |
|
WPS function |
Support |
VOIP Technical features
|
Tech features |
description |
|
Voltage and Current Monitoring |
The ONU continuously monitors the TIP, RING, and battery voltages and currents via an on-chip Monitor ADC |
|
Power Monitoring and Power Fault Detection |
The ONU monitoring functions are used to continuously protect against excessive power conditions |
|
Thermal Overload Shutdown |
If the die temperature exceeds the maximum junction temperature threshold, the device will shut itself down |
|
Default configuration |
Protocol: SIP; Codec type selection: G722, G729, G711A, G711U, FAX: support（the default configuration is disable）; |
Definition of Indicator LED
|
Symbol |
Color |
Meaning |
|
PWR |
Green |
ON: successfully connect with power OFF: fail to connect with power |
|
PON |
Green |
ON: ONU port Link UP correctly Flicker: PON registering OFF: ONU ports link down faulty |
|
LAN |
Green |
ON/ Flicker: Link up correctly OFF: link down faulty |
|
TEL |
Green |
ON: Register success OFF: Register fail |
|
2.4G/5G |
Green |
ON: WIFI is running OFF: WIFI startup fail |
|
LOS |
Red |
Flicker: Detected optical input OFF: detected fiber to input |
Packing List
|
Name |
Quantity |
Unit |
|
XPON ONU |
1 |
pcs |
|
Supply Power |
1 |
pcs |
|
Manual & Warranty Card |
1 |
pcs |
Ordering Information
|
Model NO. |
Function and Interface |
Type of Fiber |
Default Communication Mode |
|
OYI 346G4R |
Wifi6 3000M AX 2.4G & 5G 4*4 MIMO |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
OYI 3436G4R |
wifi6 3000M AX 2.4G & 5G 1 VIOP 4*4 MIMO |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
OYI 3426G4DER |
wifi6 3000M AX 2.4G & 5G 1 WDM CATV 4*4MIMO |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
OYI 34236G4DER |
wifi6 3000M AX 2.4G & 5G 1 VIOP 1 WDM CATV 4*4 MIMO |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
ONU Weight Table
|
Product form |
Model NO. |
Weigh t(kg) |
Bare weight （kg) |
Size |
Carton |
|||
|
Product: （mm） |
Package： (mm) |
Carton size |
Quantity |
Weight (kg) |
||||
|
4LAN ONU |
OYI 346G4R |
0.40 |
0.20 |
168*110*3 6 |
215*200*4 3 |
49.5*48*37. 5 |
36 |
15.7 |
|
4LAN ONU |
OYI 3436G4R |
0.50 |
0.20 |
168*110*3 6 |
215*200*4 3 |
49.5*48*37. 5 |
28 |
15.4 |
|
4LAN ONU |
3426G4DER |
0.50 |
0.30 |
168.110*36 |
215*200*4 3 |
57.5*50.32. 5 |
32 |
17.2 |
|
4LAN ONU |
34236G4DER |
0.50 |
0.30 |
168.110*36 |
215*200*4 3 |
51*49*44 |
40 |
21.2 |
-
OYI FAT H24A
This box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system. It intergtates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building. -
OYI-FOSC-D109H
The OYI-FOSC-D109H dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. The closure has 9 entrance ports on the end (8 round ports and 1 oval port). The shell of the product is made from PP+ABS material. The shell and the base are sealed by pressing the silicone rubber with the allocated clamp. The entry ports are sealed by heat-shrinkable tubes. The closures can be opened again after being sealed and reused without changing the sealing material. The closure’s main construction includes the box, splicing, and it can be configured with adapters and optical splitters. -
OYI-OCC-E Type
Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross-connection cabinets will be widely deployed and move closer to the end user. -
OYI-FAT16C Terminal Box
The 16-core OYI-FAT16C optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The OYI-FAT16C optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 3 cable holes under the box that can accommodate 3 outdoor optical cables for direct or different junctions, and it can also accommodate 16 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 16 cores capacity specifications to accommodate the box’s expansion needs. -
OYI-ODF-R-Series Type
The OYI-ODF-R-Series type series is a necessary part of the indoor optical distribution frame, specially designed for optical fiber communication equipment rooms. It has the function of cable fixation and protection, fiber cable termination, wiring distribution, and protection of fiber cores and pigtails. The unit box has a metal plate structure with a box design, providing a beautiful appearance. It is designed for 19″ standard installation, offering good versatility. The unit box has a complete modular design and front operation. It integrates fiber splicing, wiring, and distribution into one. Each individual splice tray can be pulled out separately, enabling operations inside or outside the box. The 12-core fusion splicing and distribution module plays the main role, with its function being splicing, fiber storage, and protection. A completed ODF unit will include adapters, pigtails, and accessories such as splice protection sleeves, nylon ties, snake-like tubes, and screws. -
OYI-FAT-H16B4
Optical fiber distribution box 16 Cores fiber optic access termination box is able to hold up to 16 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box. The optical distribution box is a solution that facilitates the installation of optical termination in branch networks for FTTH environments.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
