0755-23179541 
sales@oyii.net.png)
8618926041961
OYI-FAT08D Terminal Box
OYI-FAT08D Terminal Box
Optic Fiber Terminal/Distribution Box 8 Cores Type
Product Features
1.Total enclosed structure.
2.Material: ABS, waterproof, dustproof, anti-aging, RoHS.
3.1*8 splitter can be installed as an option.
4.Optical fiber cable, pigtails, patch cords are running through their own paths without disturbing each other.
5.The distribution box can be flipped up, and the feeder cable can be placed in a cup-joint way, making it easy for maintenance and installation.
6.The distribution box can be installed by wall-mounted or pole-mounted methods, suitable for both indoor and outdoor use.
7.Suitable for fusion splice or mechanical splice.
8.Adapters and pigtail outlet compatible.
9.With mutilayered design, the box can be installed and maintained easily, the fusion and termination are completely separated.
10.Can be installed 1 pc of 1*8 tube splitter.
Application
1.FTTX access system terminal link.
2.Widely used in FTTH access network.
3.Telecommunication networks.
4.CATV networks.
5.Data communications networks.
6.Local area networks.
Specifications
|
Item No. |
Description |
Weight (kg) |
Size (mm) |
|
OYI-FAT08D |
1 pc of 1*8 tube box splitter |
0.28 |
190*130*48mm |
|
Material |
ABS/ABS+PC |
||
|
Colour |
White, Black, Gray or customer’s request |
||
|
Waterproof |
IP65 |
||
Packaging Information
1.Quantity: 50pcs/Outer box.
2.Carton Size: 69*21*52cm.
3.N.Weight: 16kg/Outer Carton.
4.G.Weight: 17kg/Outer Carton.
5.OEM service available for mass quantity, can print logo on cartons.
Inner Box
Outer Carton
-
Loose Tube Armored Flame-retardant Direct Burie...
The fibers are positioned in a loose tube made of PBT. The tubes are filled with a water-resistant filling compound. A steel wire or FRP is located in the center of the core as a metallic strength member. The tubes and the fillers are stranded around the strength member into a compact and circular core. An Aluminum Polyethylene Laminate (APL) or steel tape is applied around the cable core, which is filled with filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE (LSZH) outer sheath.(WITH DOUBLE SHEATHS) -
Direct Installation (DI) 24-way 8/5mm+1-way 10/...
A bundle of micro- or mini-tubes with strengthened wall thickness is encased in a single thin HDPE sheath, forming a duct assembly specifically engineered for fiber optical cable deployment. This robust design enables versatile installation—either retrofitted into existing ducts or directly buried underground—supporting seamless integration into fiber optical cable networks. The micro ducts are optimized for high-efficiency fiber optical cable blowing, featuring an ultra-smooth inner surface with low-friction properties to minimize resistance during air-assisted cable insertion. Each micro duct is color-coded per Figure 1, facilitating quick identification and routing of fiber optical cable types (e.g., single-mode, multi-mode) during network installation and maintenance. -
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access. -
OYI3434G4R
ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol,ONU is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON REALTEK chipset and has high reliability , easy management, flexible configuration, robustness, good quality service guarantee(Qos). -
OYI-OCC-G Type （24-288）steel TYPE
Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross connection cabinets will be widely deployed and move closer to the end user. -
OYI-FOSC-H06
The OYI-FOSC-01H horizontal fiber optic splice closure has two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man-well of pipeline, embedded situation, etc. Comparing with a terminal box, the closure requires much stricter requirements of seal. Optical splice closures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. The closure has 2 entrance ports. The shell of the product is made from ABS+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
