ABS Cassette Type Splitter

Optic Fiber PLC Splitter

ABS Cassette Type Splitter

A fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals, especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal.


Product Detail

FAQ

Product Tags

OYI provide a highly precise ABS cassette-type PLC splitter for the construction of optical networks. With low requirements for placement position and environment, its compact cassette-type design can easily be placed into an optical fiber distribution box, optical fiber junction box, or any kind of box that can reserve some space. It can be easily applied in FTTx construction, optical network construction, CATV networks, and more.

The ABS cassette-type PLC splitter family includes 1x2, 1x4, 1x8, 1x16, 1x32, 1x64, 1x128, 2x2, 2x4, 2x8, 2x16, 2x32, 2x64, and 2x128, which are tailored to different applications and markets. They have a compact size with wide bandwidth. All products meet ROHS, GR-1209-CORE-2001, and GR-1221-CORE-1999 standards.

Product Features

Wide operating wavelength: from 1260nm to 1650nm.

Low insertion loss.

Low polarization related loss.

Miniaturized design.

Good consistency between channels.

High reliability and stability.

Passed GR-1221-CORE reliability test.

Compliance with RoHS standards.

Different types of connectors can be provided according to customer needs, with fast installation and reliable performance.

Box type: installed in a 19 inch standard rack. When the fiber optic branch enters the home, the installation equipment provided is the fiber optic cable handover box. When the fiber optic branch enters the home, it is installed in the equipment specified by the customer.

Technical Parameters

Working Temperature: -40℃~80℃

FTTX (FTTP, FTTH, FTTN, FTTC).

FTTX networks.

Data Communication.

PON networks.

Fiber Type: G657A1, G657A2, G652D.

Test required: The RL of UPC is 50dB, APC is 55dB; UPC Connectors: IL add 0.2 dB, APC Connectors: IL add 0.3 dB.

Wide operating wavelength: from 1260nm to 1650nm.

Specifications

1×N (N>2) PLC splitter (Without connector) Optical parameters
Parameters 1×2 1×4 1×8 1×16 1×32 1×64 1×128
Operation Wavelength (nm) 1260-1650
Insertion Loss (dB) Max 4 7.2 10.5 13.6 17.2 21 25.5
Return Loss (dB) Min 55 55 55 55 55 55 55
50 50 50 50 50 50 50
PDL (dB) Max 0.2 0.2 0.3 0.3 0.3 0.3 0.4
Directivity (dB) Min 55 55 55 55 55 55 55
WDL (dB) 0.4 0.4 0.4 0.5 0.5 0.5 0.5
Pigtail Length (m) 1.2 (±0.1) or customer specified
Fiber Type SMF-28e with 0.9mm tight buffered fiber
Operation Temperature (℃) -40~85
Storage Temperature (℃) -40~85
Module Dimension (L×W×H) (mm) 100×80x10 120×80×18 141×115×18
2×N (N>2) PLC splitter (Without connector) Optical parameters
Parameters 2×4 2×8 2×16 2×32 2×64
Operation Wavelength (nm) 1260-1650
Insertion Loss (dB) Max 7.5 11.2 14.6 17.5 21.5
Return Loss (dB) Min 55 55 55 55 55
50 50 50 50 50
PDL (dB) Max 0.2 0.3 0.4 0.4 0.4
Directivity (dB) Min 55 55 55 55 55
WDL (dB) 0.4 0.4 0.5 0.5 0.5
Pigtail Length (m) 1.0 (±0.1) or customer specified
Fiber Type SMF-28e with 0.9mm tight buffered fiber
Operation Temperature (℃)  -40~85
Storage Temperature (℃)  -40~85
Module Dimension (L×W×H) (mm) 100×80x10 120×80×18 141×115×18

Remark

Above parameters does without connector.

Added connector insertion loss increase 0.2dB.

The RL of UPC is 50dB, the RL of APC is 55dB.

Packaging Information

1x16-SC/APC as a reference.

1 pcs in 1 plastic box.

50 specific PLC splitter in carton box.

Outer carton box size: 55*45*45 cm, weight: 10kg.

OEM service available for mass quantity, can print logo on cartons.

Inner Packaging

Inner Packaging

Outer Carton

Outer Carton

Packaging Information
  • Products Recommended

    • Air Blowing Mini Optical Fibre Cable

      Air Blowing Mini Optical Fibre Cable

      The optical fiber is placed inside a loose tube made of high-modulus hydrolyzable material. The tube is then filled with thixotropic, water-repellent fiber paste to form a loose tube of optical fiber. A plurality of fiber optic loose tubes, arranged according to color order requirements and possibly including filler parts, are formed around the central non-metallic reinforcement core to create the cable core via SZ stranding. The gap in the cable core is filled with dry, water-retaining material to block water. A layer of polyethylene (PE) sheath is then extruded.
      The optical cable is laid by air blowing microtube. First, the air blowing microtube is laid in the outer protection tube, and then the micro cable is laid in the intake air blowing microtube by air blowing. This laying method has a high fiber density, which greatly improves the utilization rate of the pipeline. It is also easy to expand the pipeline capacity and diverge the optical cable.

    • MPO / MTP Trunk Cables

      MPO / MTP Trunk Cables

      Oyi MTP/MPO Trunk & Fan-out trunk patch cords provide an efficient way to install a large number of cables quickly. It also provides high flexibility on unplugging and re-use. It is especially suitable for the areas that require rapid deployment of high-density backbone cabling in data centers, and high fibre environments for high performance.

       

      MPO / MTP branch fan-out cable of us use high-density multi-core fiber cables and MPO / MTP connector

      through the intermediate branch structure to realize switching branch from the MPO / MTP to LC, SC, FC, ST, MTRJ and other common connectors. A variety of 4-144 single-mode and multi-mode optical cables can be used, such as common G652D/G657A1/G657A2 single-mode fiber, multimode 62.5/125, 10G OM2/OM3/OM4, or 10G multimode optical cable with high bending performance and so on .It is suitable for direct connection of MTP-LC branch cables–one end is 40Gbps QSFP+, and the other end is four 10Gbps SFP+. This connection decomposes one 40G into four 10G. In many existing DC environments, LC-MTP cables are used to support high-density backbone fibers between switches, rack-mounted panels, and main distribution wiring boards.

    • All Dielectric Self-Supporting Cable

      All Dielectric Self-Supporting Cable

      The structure of ADSS (single-sheath stranded type) is to place 250um optical fiber into a loose tube made of PBT, which is then filled with waterproof compound. The center of the cable core is a non-metallic central reinforcement made of fiber-reinforced composite (FRP). The loose tubes (and filler rope) are twisted around the central reinforcing core. The seam barrier in the relay core is filled with water-blocking filler, and a layer of waterproof tape is extruded outside the cable core. Rayon yarn is then used, followed by extruded polyethylene (PE) sheath into the cable. It is covered with a thin polyethylene (PE) inner sheath. After a stranded layer of aramid yarns is applied over the inner sheath as a strength member, the cable is completed with a PE or AT (anti-tracking) outer sheath.

    • OYI-FTB-10A Terminal Box

      OYI-FTB-10A Terminal Box

       

      The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.

    • OYI C Type Fast Connector

      OYI C Type Fast Connector

      Our fiber optic fast connector OYI C type is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly. It can provide open flow and precast types, whose optical and mechanical specifications meet the standard optical fiber connector. It is designed for high quality and high efficiency for installation.

    • Anchoring Clamp PA600

      Anchoring Clamp PA600

      The anchoring cable clamp PA600 is a high-quality and durable product. It consists of two parts: a stainless-steel wire and a reinforced nylon body made of plastic. The body of the clamp is made of UV plastic, which is friendly and safe to use even in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 3-9mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly.

      FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests.

    If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.

    Facebook

    YouTube

    YouTube

    Instagram

    Instagram

    LinkedIn

    LinkedIn

    Whatsapp

    +8618926041961

    Email

    sales@oyii.net