0755-23179541 
sales@oyii.net
Optic Fiber Terminal Box
Optic Fiber Terminal Box
OYI FTB104/108/116
Product Features
Application
Specification
|
Items |
OYI FTB104 |
OYI FTB108 |
OYI FTB116 |
|
Dimension（ mm） |
H104xW105xD26 |
H200xW140xD26 |
H245xW200xD60 |
|
Weight (Kg) |
0.4 |
0.6 |
1 |
|
Cable diameter (mm) |
|
Φ5~Φ10 |
|
|
Cable entry ports |
1hole |
2holes |
3holes |
|
Max capacity |
4cores |
8cores |
16cores |
Kit contents
|
Description |
Type |
Quantity |
|
splice protective sleeves |
60mm |
available according to the fiber cores |
|
Cable ties |
60mm |
10×splice tray |
|
Installation nail |
nail |
3pcs |
Installation tools
1.Knife
2.Screwdriver
3.Pliers
Installation steps
1.Measured the three installation holes’ distances as following pictures, then drill holes in the wall, fix the customer terminal box on the wall by expansion screws.
|
|
 |
 |
2.Peeling cable, take out required fibers, then fixed the cable on the body of the box by joint as below picture.
3.Fusion fibers as below, then store in the fibers as below picture.
4.Store redundant fibers in the box and insert the pigtail connectors in the adapters, then fixed by cable ties.
5.Close the cover by press-pull button, the installation is finished.
Packaging Information
|
Model |
Inner carton dimension （mm) |
Inner carton weight（kg) |
Outer carton dimension （mm) |
Outer carton weight（kg) |
No of unit per outer carton （pcs) |
|
OYI FTB-104 |
150×145×55 |
0.4 |
730×320×290 |
22 |
50 |
|
OYI FTB-108 |
210×185×55 |
0.6 |
750×435×290 |
26 |
40 |
|
OYI FTB-116 |
255×235×75 |
1 |
530×480×390 |
22 |
20 |
Packaging Information
Inner Box
Outer Carton
-
Loose Tube Corrugated Steel/Aluminum Tape Flame...
The fibers are positioned in a loose tube made of PBT. The tube is filled with a water-resistant filling compound, and a steel wire or FRP is located in the center of the core as a metallic strength member. The tubes (and the fillers) are stranded around the strength member into a compact and circular core. The PSP is longitudinally applied over the cable core, which is filled with filling compound to protect it from water ingress. Finally, the cable is completed with a PE (LSZH) sheath to provide additional protection.
-
Anchoring Clamp PA2000
The anchoring cable clamp is of high quality and durable. This product consists of two parts: a stainless steel wire and its main material, a reinforced nylon body that is lightweight and convenient to carry outdoors. The clamp’s body material is UV plastic, which is friendly and safe and can be used in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 11-15mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly.
FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees Celsius. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests.
-
OYI-ODF-MPO RS144
OYI-ODF-MPO RS144 1U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 1U height for 19-inch rack mounted application. It has 3pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 12pcs MPO cassettes HD-08 for max. 144 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel.
-
16 Cores Type OYI-FAT16B Terminal Box
The 16-core OYI-FAT16B optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
The OYI-FAT16B optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 2 cable holes under the box that can accommodate 2 outdoor optical cables for direct or different junctions, and it can also accommodate 16 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 16 cores capacity specifications to accommodate the box’s expansion needs. -
Armoured Patchcord
Oyi armoured patch cord provides flexible interconnection to active equipment, passive optical devices and cross connects. These patch cords are manufactured so as to withstand side pressure and repeated bending and are used in external applications in customer premises, central offices and in harsh environment. Armoured patch cords are constructed with a stainless steel tube over a standard patch cord with an outer jacket. The flexible metal tube limits the bending radius, preventing the optical fibre from breaking. This ensures a safe and durable optical fibre network system.
According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC.
Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as central office, FTTX and LAN etc.
-
Non-metallic Central Tube Access Cable
The fibers and water-blocking tapes are positioned in a dry loose tube. The loose tube is wrapped with a layer of aramid yarns as a strength member. Two parallel fiber-reinforced plastics (FRP) are placed on the two sides, and the cable is completed with an outer LSZH sheath.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.