0755-23179541 
sales@oyii.net
ST Type
Optic Fiber Adapter
ST Type
Product Features
Simplex and duplex versions are available.
Low insertion loss and return loss.
Excellent changeability and directivity.
Ferrule end surface is pre-domed.
Precision anti-rotation key and corrosion-resistant body.
Ceramic sleeves.
Professional manufacturer, 100% tested.
Accurate mounting dimensions.
ITU standard.
Fully compliant with ISO 9001:2008 quality management system.
Technical Specifications
| Parameters |
SM |
MM |
||
|
PC |
UPC |
APC |
UPC |
|
| Operation Wavelength |
1310&1550nm |
850nm&1300nm |
||
| Insertion Loss (dB) Max |
≤0.2 |
≤0.2 |
≤0.2 |
≤0.3 |
| Return Loss (dB) Min |
≥45 |
≥50 |
≥65 |
≥45 |
| Repeatability Loss (dB) |
≤0.2 |
|||
| Exchangeability Loss (dB) |
≤0.2 |
|||
| Repeat Plug-Pull Times |
＞1000 |
|||
| Operation Temperature (℃) |
-20~85 |
|||
| Storage Temperature (℃) |
-40~85 |
|||
Applications
Telecommunication system.
Optical communication networks.
CATV, FTTH, LAN.
Fiber optic sensors.
Optical transmission system.
Test equipment.
Industrial, Mechanical, and Military.
Advanced production and testing equipment.
Fiber distribution frame, mounts in fiber optic wall mount and mount cabinets.
Packaging Information
ST/UPC as a reference.
1 pc in 1 plastic box.
50 specific adapter in carton box.
Outside carton box size: 47*38.5*41 cm, weight: 15.12kg.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.
-
OYI-OCC-E Type
Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross-connection cabinets will be widely deployed and move closer to the end user.
-
OYI-ODF-MPO RS144
OYI-ODF-MPO RS144 1U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 1U height for 19-inch rack mounted application. It has 3pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 12pcs MPO cassettes HD-08 for max. 144 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel.
-
OYI-FAT48A Terminal Box
The 48-core OYI-FAT48A series optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
The OYI-FAT48A optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage area. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 3 cable holes under the box that can accommodate 3 outdoor optical cables for direct or different junctions, and it can also accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 48 cores capacity specifications to meet the expansion needs of the box.
-
OYI FAT H24A
This box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system.
It intergtates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building.
-
Loose Tube Non-metallic Heavy Type Rodent Prote...
Insert the optical fiber into the PBT loose tube, fill the loose tube with waterproof ointment. The center of the cable core is a non-metallic reinforced core, and the gap is filled with waterproof ointment. The loose tube (and filler) is twisted around the center to strengthen the core, forming a compact and circular cable core. A layer of protective material is extruded outside the cable core, and glass yarn is placed outside the protective tube as a rodent proof material. Then, a layer of polyethylene (PE) protective material is extruded.(WITH DOUBLE SHEATHS)
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.