0755-23179541 
sales@oyii.net
Male to Female Type ST Attenuator
Fiber Optic Attenuator
Male to Female Type ST Attenuator
Product Features
Wide attenuation range.
Low return loss.
Low PDL.
Polarization insensitive.
Various connector types.
Highly reliable.
Specifications
| Parameters |
Min |
Typical |
Max |
Unit |
|
| Operating Wavelength Range |
1310±40 |
mm |
|||
|
1550±40 |
mm |
||||
| Return Loss | UPC Type |
50 |
dB |
||
| APC Type |
60 |
dB |
|||
| Operating Temperature |
-40 |
85 |
℃ |
||
| Attenuation Tolerance |
0~10dB±1.0dB |
||||
|
11~25dB±1.5dB |
|||||
| Storage Temperature |
-40 |
85 |
≥50 |
||
Note: Customized configurations is available upon request.
Applications
Optical fiber communication networks.
Optical CATV.
Fiber network deployments.
Fast/Gigabit Ethernet.
Other data applications requiring high transfer rates.
Packaging Information
1 pc in 1 plastic bag.
1000 pcs in 1 carton box.
Outside carton box size: 46*46*28.5 cm, Weight: 21kg.
OEM service is available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
GJFJKH
Jacketed aluminum interlocking armor provides the optimal balance of ruggedness, flexibility and low weight. The Multi-Strand Indoor Armored Tight-Buffered 10 Gig Plenum M OM3 Fiber Optic Cable from Discount Low Voltage is a good choice inside buildings where toughness is required or where rodents are a problem. These also are ideal for manufacturing plants and harsh industrial environments as well as high-density routings in data centers. Interlocking armor can be used with other types of cable, including indoor/outdoor tight-buffered cables.
-
10/100Base-TX Ethernet Port to 100Base-FX Fiber...
MC0101F fiber Ethernet media converter creates a cost-effective Ethernet to fiber link, transparently converting to/ from 10 Base-T or 100 Base-TX Ethernet signals and 100 Base-FX fiber optical signals to extend an Ethernet network connection over a multimode/single mode fiber backbone.
MC0101F fiber Ethernet media converter supports maximum multimode fiber optic cable distance of 2km or a maximum single mode fiber optic cable distance of 120 km, providing a simple solution for connecting 10/100 Base-TX Ethernet networks to remote locations using SC/ST/FC/LC-terminated single mode/multimode fiber, while delivering solid network performance and scalability.
Easy to set-up and install, this compact, value-conscious fast Ethernet media converter features autos witching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode, speed, full and half duplex. -
OYI-ODF-MPO RS144
OYI-ODF-MPO RS144 1U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 1U height for 19-inch rack mounted application. It has 3pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 12pcs MPO cassettes HD-08 for max. 144 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel.
-
OYI-FAT 24C
This box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system.
It intergates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building.
-
ABS Cassette Type Splitter
A fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals, especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal.
-
OYI-FTB-10A Terminal Box
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.