0755-23179541 
sales@oyii.net.png)
8618926041961
ONU 1GE
Single Port Xpon
ONU 1GE
Product Description
The 1GE is a single port XPON fiber optic modem, which is designed to meet the FTTH ultra-wide band access requirements of home and SOHO users. It supports NAT / firewall and other functions. It is based on stable and mature GPON technology with high cost-performance and layer 2 Ethernet switch technology. It is reliable and easy to maintain, guarantees QoS, and fully conforms to ITU-T g.984 XPON standard.
Product Features
1. XPON WAN port with 1.244Gbps uplink / 2.488Gbps downlink link speed;
2. 1x 10/100/1000BASE-T Ethernet RJ45 Ports;
Specifications
1. XPON WAN port with 1.244Gbps uplink / 2.488Gbps downlink link speed;
2. 1x 10/100/1000BASE-T Ethernet RJ45 Ports;
|
CPU |
300MHz Mips Single core |
|
Chip model |
RTL9601D-VA3 |
|
Memory |
8MB SIP NOR Flash/32MB DDR2 SOC |
|
Bob Driver |
GN25L95 |
|
XPON Protocol Specification |
Comply ITU-T G.984 GPON standard: G.984.1 general characteristics G.984.2 physical Media Dependent (PMD) layer specifications G.984.3 transmission convergence layer specifications G.984.4 ONT management and control interface specification Support DS/US transmission rate to 2.488 Gbps/1.244 Gbps Wavelength: 1490 nm downstream & 1310 nm upstream Comply with class B+ type PMD Physical distance reach to 20 km Support Dynamic Bandwidth Allocation (DBA) GPON Encapsulation Method (GEM) supports Ethernet packet Supports GEM header removal/insertion and data extraction/segmentation (GEM SAR) Configurable AES DS and FEC DS/US Support up to 8 T-CONs each with priority queues (US) |
|
Network Protocol Specifications |
802.3 10/100/1000 Base T Ethernet ANSI/IEEE 802.3 NWay auto-negotiation 802.1Q VLAN tagging/un-tagging Support flexible traffic classification Support VLAN staking Support VLAN Intelligent Bridging and Cross Connect mode |
|
Interface |
WAN: One Giga optical interface (APC or UPC) LAN: 1*10/100/1000 auto MDI/MDI-X RJ-45 ports |
|
LED Indicators |
Power, PON, LOS, LAN |
|
Buttons |
Reset |
|
Power Supply |
DC12V 0.5A |
|
Product Size |
90X72X28mm (length X width X height) |
|
Work Environment |
Working temperature: 0°C—40°C Working humidity: 5—95% |
|
Security |
Firewall, Dos Protection, DMZ, ACL, IP/MAC/URL filtering |
|
WAN Networking |
Static IP WAN connection DHCP client WAN connection PPPoE WAN connection IPv6 dual stack |
|
Management |
Standard OMCI (G.984.4) Web GUI (HTTP/HTTPS) Firmware upgrade via HTTP/HTTPS/TR069 CLI command via Telnet/console Configuration backup/restore TR069 management DDNS, SNTP, QoS |
|
Certification |
CE/WiFi certification |
-
FTTH Drop Cable Suspension Tension Clamp S Hook
FTTH fiber optic drop cable suspension tension clamp S hook clamps are also called insulated plastic drop wire clamps. The design of the dead-ending and suspension thermoplastic drop clamp includes a closed conical body shape and a flat wedge. It is connected to the body through a flexible link, ensuring its captivity and an opening bail. It is a kind of drop cable clamp that is widely used for both indoor and outdoor installations. It is provided with a serrated shim to increase hold on the drop wire and used to support one and two pair telephone drop wires at span clamps, drive hooks, and various drop attachments. The prominent advantage of the insulated drop wire clamp is that it can prevent electrical surges from reaching the customer premises. The working load on the support wire is effectively reduced by the insulated drop wire clamp. It is characterized by good corrosion resistant performance, good insulating properties, and long life service. -
All Dielectric Self-Supporting Cable
The structure of ADSS (single-sheath stranded type) is to place 250um optical fiber into a loose tube made of PBT, which is then filled with waterproof compound. The center of the cable core is a non-metallic central reinforcement made of fiber-reinforced composite (FRP). The loose tubes (and filler rope) are twisted around the central reinforcing core. The seam barrier in the relay core is filled with water-blocking filler, and a layer of waterproof tape is extruded outside the cable core. Rayon yarn is then used, followed by extruded polyethylene (PE) sheath into the cable. It is covered with a thin polyethylene (PE) inner sheath. After a stranded layer of aramid yarns is applied over the inner sheath as a strength member, the cable is completed with a PE or AT (anti-tracking) outer sheath. -
Armoured Patchcord
Oyi armoured patch cord provides flexible interconnection to active equipment, passive optical devices and cross connects. These patch cords are manufactured so as to withstand side pressure and repeated bending and are used in external applications in customer premises, central offices and in harsh environment. Armoured patch cords are constructed with a stainless steel tube over a standard patch cord with an outer jacket. The flexible metal tube limits the bending radius, preventing the optical fibre from breaking. This ensures a safe and durable optical fibre network system. According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC. Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as central office, FTTX and LAN etc. -
OYI-FAT24A Terminal Box
The 24-core OYI-FAT24A optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. -
OYI J Type Fast Connector
Our fiber optic fast connector, the OYI J type, is designed for FTTH (Fiber to The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly that provides open flow and precast types, meeting the optical and mechanical specifications of standard optical fiber connectors. It is designed for high quality and high efficiency during installation.Mechanical connectors make fiber terminations quick, easy, and reliable. These fiber optic connectors offer terminations without any hassle and require no epoxy, no polishing, no splicing, and no heating, achieving similar excellent transmission parameters as standard polishing and splicing technology. Our connector can greatly reduce the assembly and setup time. The pre-polished connectors are mainly applied to FTTH cables in FTTH projects, directly at the end-user site. -
Non-metallic Central Tube Access Cable
The fibers and water-blocking tapes are positioned in a dry loose tube. The loose tube is wrapped with a layer of aramid yarns as a strength member. Two parallel fiber-reinforced plastics (FRP) are placed on the two sides, and the cable is completed with an outer LSZH sheath.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
