0755-23179541 
sales@oyii.net.png)
8618926041961
UPB Aluminum Alloy Universal Pole Bracket
Hardware Products Overhead Line Fittings
UPB Aluminum Alloy Universal Pole Bracket
Product Features
Material: aluminum alloy, lightweight.
Easy to install.
High quality.
Resistant to corrosion, can be used for a very long time.
Warranty and long lifespan.
Hot dip galvanized surface treatment, resistant to rust and corrosion.
Specifications
| Model | Material | Weight (kg) | Working Load (kn) | Packing Unit |
| UPB | Aluminum Alloy | 0.22 | 5-15 | 50pcs/Carton |
Installation Instructions
With steel bands
The UPB bracket can be installed on any type of pole-drilled or undrilled-with two 20x07mm stainless steel bands plus two buckles.
Usually allow two bands of one meter each perbracket.
With bolts
If the top of the pole is drilled ( wooden poles, occasionally concrete poles ) the UPB bracket can also be secured with a 14 or 16mm bolt . The bolt length should be at least equal to the pole diameter + 50 mm ( bracket thickness).
Single dead-end stay
Double dead-end
Double anchoring (angle poles)
Double dead-ending (jointing poles)
Triple dead-ending (distribution poles)
Securing of multiple drops
Fixing of cross-arm 5/14with 2 bolts 1/13
Applications
Widely applied in cable connection fittings.
To support wire, conductor, and cable in transmission line fittings.
Packaging Information
Quantity: 50pcs/Outer box.
Carton Size: 42*28*23cm.
N.Weight: 11kg/Outer Carton.
G.Weight: 12kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
Bare Fiber Type Splitter
A fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals, and is especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal. -
Galvanized Brackets CT8, Drop Wire Cross-arm Br...
It is made from carbon steel with hot-dipped zinc surface processing, which can last a very long time without rusting for outdoor purposes. It is widely used with SS bands and SS buckles on poles to hold accessories for telecom installations. The CT8 bracket is a type of pole hardware used to fix distribution or drop lines on wooden, metal, or concrete poles. The material is carbon steel with a hot-dip zinc surface. The normal thickness is 4mm, but we can provide other thicknesses upon request. The CT8 bracket is an excellent choice for overhead telecommunication lines as it allows for multiple drop wire clamps and dead-ending in all directions. When you need to connect many drop accessories on one pole, this bracket can meet your requirements. The special design with multiple holes allows you to install all accessories in one bracket. We can attach this bracket to the pole using two stainless steel bands and buckles or bolts. -
OYI-FAT16J-B Series Terminal Box
The 16-core OYI-FAT16J-B optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The OYI-FAT16J-B optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 4 cable holes under the box that can accommodate 4 outdoor optical cables for direct or different junctions, and it can also accommodate 16 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 16 cores capacity specifications to accommodate the box’s expansion needs. -
Stay Rod
This stay rod is used to connect the stay wire to the ground anchor, also known as the stay set. It ensures that the wire is firmly rooted to the ground and everything remains stable. There are two types of stay rods available in the market: the bow stay rod and the tubular stay rod. The difference between these two types of power-line accessories is based on their designs. -
OYI D Type Fast Connector
Our fiber optic fast connector OYI D type is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly and can provide open flow and precast types, with optical and mechanical specifications that meet the standard for optical fiber connectors. It is designed for high quality and high efficiency during installation. -
Male to Female Type FC Attenuator
OYI FC male-female attenuator plug type fixed attenuator family offers high performance of various fixed attenuation for industrial standard connections. It has a wide attenuation range, extremely low return loss, is polarization insensitive, and has excellent repeatability. With our highly integrated design and manufacturing capability, the attenuation of male-female type SC attenuator can also be customized to help our customers find better opportunities. Our attenuator complies with industry green initiatives, such as ROHS.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
