0755-23179541 
sales@oyii.net.png)
8618926041961
10/100Base-TX Ethernet Port to 100Base-FX Fiber Port
Fiber Media Converter MC0101G Series
10/100Base-TX Ethernet Port to 100Base-FX Fiber Port
Product Description
MC0101G fiber Ethernet media converter creates a cost-effective Ethernet to fiber link, transparently converting to/from 10Base-T or 100Base-TX or 1000Base-TX Ethernet signals and 1000Base-FX fiber optical signals to extend an Ethernet network connection over a multimode/single mode fiber backbone.
MC0101G fiber Ethernet media converter supports maximum multimode fiber optic cable distance of 550m or a maximum single mode fiber optic cable distance of 120km providing a simple solution for connecting 10/100Base-TX Ethernet networks to remote locations using SC/ST/FC/LC terminated single mode/multimode fiber, while delivering solid network performance and scalability.
Easy to set-up and install, this compact, value-conscious fast Ethernet media converter features auto. switching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode speed, full and half duplex.
Product Features
1. Support 11000Base-FX fiber port and 110/100/1000Base-TX Ethernet port.
2. Support IEEE802.3, IEEE802.3u fast Ethernet.
3. Full and half duplex communication.
4. Plug and play.
5. Easy to read LED indicators.
6. Includes external 5VDC power supply.
Technical Specifications
|
Protocol |
IEEE802.3，IEEE802.3u |
|
Wavelength |
Multimode: 850nm,1310nm Single mode: 1310nm,1550nm |
|
Transmission Distance |
Cat5/Cat5e: 100 meters Multimode: 550m Single mode: 20/40/60/80/100/120km |
|
Ethernet Port |
10/100/1000Base-TX RJ45 port |
|
Fiber Port |
1000Base-FX SC/ST/FC/LC (SFP slot) port |
|
Exchange Attribute |
Packet Buffer Size: 1M MAC Table Size: 1K Store and Forward: 9.6us Error Rate: <1/1000000000 |
|
Power supply |
Power Input: 5VDC Full Load: <2.5 watts |
|
operating Environment |
Operating Temperature: -10-70°c Storage Temperature: -10-70°C Storage Humidity: 5% to 90% non-condensing |
|
Weight |
400g |
|
Dimension |
94mm*71mm*26mm(L*W*H) |
|
Certification |
CE, FCC, ROHS |
|
Quality assurance |
3 years |
Dimensions
Ordering information
-
SFP-ETRx-4
OPT-ETRx-4 Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the Gigabit Ethernet standards as specified in IEEE STD 802.3. The 10/100/1000 BASE-T physical layer IC (PHY) can be accessed via 12C, allowing access to all PHY settings and features. The OPT-ETRx-4 is compatible with 1000BASE-X auto-negotiation, and have a link indication feature. PHY is disabled when TX disable is high or open. -
OYI-FOSC-H20
The OYI-FOSC-H20 dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. -
OYI 321GER
ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, onu is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON Realtek chipset and has high reliability,easy management,flexible configuration，robustness，good quality service guarantee(Qos). ONU adopts RTL for WIFI application that supports IEEE802.11b/g/n standard at the same time，a WEB system provided simplifies the configuration of the ONU and connects to INTERNET conveniently for users. XPON has G / E PON mutual conversion function, which is realized by pure software. -
Loose Tube Non-metallic Heavy Type Rodent Prote...
Insert the optical fiber into the PBT loose tube, fill the loose tube with waterproof ointment. The center of the cable core is a non-metallic reinforced core, and the gap is filled with waterproof ointment. The loose tube (and filler) is twisted around the center to strengthen the core, forming a compact and circular cable core. A layer of protective material is extruded outside the cable core, and glass yarn is placed outside the protective tube as a rodent proof material. Then, a layer of polyethylene (PE) protective material is extruded.(WITH DOUBLE SHEATHS) -
OYI-F402 Panel
Optic patch panel provides branch connection for fiber termination. It is an integrated unit for fiber management, and can be used as distribution box. It divides into fix type and sliding-out type. This equipment function is to fix and manage the fiber optic cables inside the box as well as provide protection. Fiber optic termination box is modular so they are applicable to your existing systems without any modification or additional work.Suitable for installation of FC, SC, ST, LC, etc. adaptors, and suitable for fiber optic pigtail or plastic box type PLC splitters. -
Self-supporting Figure 8 Fiber Optic Cable
The 250um fibers are positioned in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire is located in the center of the core as a metallic strength member. The tubes (and fibers) are stranded around the strength member into a compact and circular cable core. After an Aluminum (or steel tape) Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of the cable, accompanied by the stranded wires as the supporting part, is completed with a polyethylene (PE) sheath to form a figure 8 structure. Figure 8 cables, GYTC8A and GYTC8S, are also available upon request. This type of cable is specifically designed for self-supporting aerial installation.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
