OYI-ATB06A Desktop Box

Optic Fiber FTTH Box 6 Cores Type

OYI-ATB06A Desktop Box

OYI-ATB06A 6-port desktop box is developed and produced by the company itself. The product’s performance meets the requirements of industry standards YD/T2150-2010. It is suitable for installing multiple types of modules and can be applied to the work area wiring subsystem to achieve dual-core fiber access and port output. It provides fiber fixing, stripping, splicing, and protection devices, and allows for a small amount of redundant fiber inventory, making it suitable for FTTD (fiber to the desktop) system applications. The box is made of high-quality ABS plastic through injection molding, making it anti-collision, flame retardant, and highly impact-resistant. It has good sealing and anti-aging properties, protecting the cable exit and serving as a screen. It can be installed on the wall.

Product Detail

FAQ

Product Tags

Product Features

1.IP-55 Protection level.

2.Integrated with cable termination and management rods.

3.Manage fibers in a reasonable fiber radius(30mm) condition.

4.High quality industrial anti-aging ABS plastic material.

5.Suitable for the wall mounted installation.

6.Suitable for FTTH indoor application.

7.6 port cable entrance for drop cable or patch cable.

8.Fiber adapter can be installed in the rosette for patching.

9.UL94-V0 fire-retardant material can be customized as option.

10.Temperature: -40 ℃ to +85 ℃.

11.Humidity: ≤ 95% (+40 ℃).

12.Atmospheric pressure: 70KPa to 108KPa.

13.Box structure: The 6 port desktop box consists mainly of the cover and the bottom box. The box structure is shown in the figure.

Specifications

Item No.	Description	Weight (g)	Size (mm)
OYI-ATB06A	For 2/4/6pcs SC Simplex Adapter	250	20511540
Material	ABS/ABS+PC
Colour	White or customer’s request
Waterproof	IP55

Applications

1.FTTX access system terminal link.

2.Widely used in FTTH access network.

3.Telecommunication networks.

4.CATV networks.

5.Data communications networks.

6.Local area networks.

The installation instruction of the box

1. Wall installation

1.1 According to the bottom box mounting hole distance on the wall to play two mounting holes, and knock into the plastic expansion sleeve.

1.2 Fix the box to the wall with M8 × 40 screws.

1.3 Check the installation of the box, qualified to cover the lid.

1.4 According to the construction requirements of the introduction of outdoor cable and FTTH drop cable.

2. Open the box

2.1 Hands were holding the cover and the bottom box, a little hard to break out to open the box.

Packaging Information

1. Quantity: 1pcs/ inner box, 50pcs/Outer box.

2. Carton Size: 43*29*58cm.

3. N.Weight: 12.5kg/Outer Carton.

4. G.Weight: 13.5kg/Outer Carton.

5. OEM service available for mass quantity, can print logo on cartons.

Inner Box

Outer Carton

Terminal Box Wall Box Adss Cable

Terminal Box Wall Box Opgw Cable

Optical Distribution Box Opgw Cable

Optical Distribution Box Adss Cable

Wall Box Fiber Management Adss Cable

Wholesale Fiber Cable Protect Box

Fiber Optic Terminal Box Factories

Desktop Box Optical Cable Exporters

Fiber Cable Protect Box Optic

Products Recommended

OYI-FAT F24C

This box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system. It intergtates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building.

VIEW MORE
10/100Base-TX Ethernet Port to 100Base-FX Fiber...

MC0101G fiber Ethernet media converter creates a cost-effective Ethernet to fiber link, transparently converting to/from 10Base-T or 100Base-TX or 1000Base-TX Ethernet signals and 1000Base-FX fiber optical signals to extend an Ethernet network connection over a multimode/single mode fiber backbone.MC0101G fiber Ethernet media converter supports maximum multimode fiber optic cable distance of 550m or a maximum single mode fiber optic cable distance of 120km providing a simple solution for connecting 10/100Base-TX Ethernet networks to remote locations using SC/ST/FC/LC terminated single mode/multimode fiber, while delivering solid network performance and scalability.Easy to set-up and install, this compact, value-conscious fast Ethernet media converter features auto. switching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode speed, full and half duplex.

VIEW MORE
Anchoring Clamp PA600

The anchoring cable clamp PA600 is a high-quality and durable product. It consists of two parts: a stainless-steel wire and a reinforced nylon body made of plastic. The body of the clamp is made of UV plastic, which is friendly and safe to use even in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 3-9mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly. FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests.

VIEW MORE
OYI G type Fast Connector

Our Fiber optic fast connector OYI G type designed for FTTH(Fiber To The Home). It is a new generation of fiber connector used in assembly. It can provide open flow and precast type, which optical and mechanical specification meets the standard optical fiber connector. It is designed for high quality and high efficiency for installation. Mechanical connectors make fiber terminaitons quick, easy and reliable. These fiber optic connectors offer terminations without any hassles and require no epoxy, no polishing, no splicing, no heating and can achieve similar excellent transmission parameters as standard polishing and spicing technology. Our connector can greatly reduce the assembly and setup time. The pre-polished connectors are mainly applied to FTTH cable in FTTH projects, directly in the end user site.

VIEW MORE
OYI-NOO2 Floor-Mounted Cabinet

VIEW MORE
OYI-FOSC-D108H-B PLC Type

The OYI-FOSC-D108H-B Type dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. The closure has 5 entrance ports on the end (6 round ports and 1 oval port). The shell of the product is made from PP+ABS material. The shell and the base are sealed by pressing the silicone rubber with the allocated clamp. The entry ports are sealed by heat-shrinkable tubes. The closures can be opened again after being sealed and reused without changing the sealing material. The closure’s main construction includes the box, splicing, and it can be configured with adapters and optical splitters.

VIEW MORE

If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.

INQUIRE