0755-23179541 
sales@oyii.net
Multi-Purpose Distribution cable GJFJV(H)
GJFJV(H)
Multi-Purpose Distribution cable GJFJV(H)
Product Features
Tight buffer fiber - Easy to strip.
Aramid yarn, as a strength member, makes the cable have excellent strength.
The outer jacket material has many advantages, such as being anti-corrosive, anti-water, anti-ultraviolet radiation, flame-retardant, and harmless to the environment, among others.
Suited for SM fiber and MM fiber (50um and 62.5um).
Optical Characteristics
| Fiber Type | Attenuation | 1310nm MFD
(Mode Field Diameter) |
Cable Cut-off Wavelength λcc(nm) | |
| @1310nm(dB/KM) | @1550nm(dB/KM) | |||
| G652D | ≤0.4 | ≤0.3 | 9.2±0.4 | ≤1260 |
| G657A1 | ≤0.4 | ≤0.3 | 9.2±0.4 | ≤1260 |
| G657A2 | ≤0.4 | ≤0.3 | 9.2±0.4 | ≤1260 |
| 50/125 | ≤3.5 @850nm | ≤0.3 @1300nm | / | / |
| 62.5/125 | ≤3.5 @850nm | ≤0.3 @1300nm | / | / |
Technical Parameters
| Cable Code | Cable Diameter (mm)±0.3 |
Cable Weight (Kg/km) | Tensile Strength（N） | Crush Resistance（N/100mm） | Bending Radius（mm） | Jacket Material | |||
| Long Term | Short Term | Long Term | Short Term | Dynamic | Static | ||||
| GJFJV-02 | 4.1 | 12.4 | 200 | 660 | 300 | 1000 | 20D | 10D | PVC/LSZH/OFNR/OFNP |
| GJFJV-04 | 4.8 | 16.2 | 200 | 660 | 300 | 1000 | 20D | 10D | PVC/LSZH/OFNR/OFNP |
| GJFJV-06 | 5.2 | 20 | 200 | 660 | 300 | 1000 | 20D | 10D | PVC/LSZH/OFNR/OFNP |
| GJFJV-08 | 5.6 | 26 | 200 | 660 | 300 | 1000 | 20D | 10D | PVC/LSZH/OFNR/OFNP |
| GJFJV-10 | 5.8 | 28 | 200 | 660 | 300 | 1000 | 20D | 10D | PVC/LSZH/OFNR/OFNP |
| GJFJV-12 | 6.4 | 31.5 | 200 | 660 | 300 | 1000 | 20D | 10D | PVC/LSZH/OFNR/OFNP |
| GJFJV-24 | 8.5 | 42.1 | 200 | 660 | 300 | 1000 | 20D | 10D | PVC/LSZH/OFNR/OFNP |
Application
Multi-optical fiber jumper.
Interconnection between instruments and communication equipment.
Indoor riser-level and plenum-level cable distribution.
Operating Temperature
| Temperature Range | ||
| Transportation | Installation | Operation |
| -20℃~+70℃ | -5℃~+50℃ | -20℃~+70℃ |
Standard
YD/T 1258.4-2005, IEC 60794, and meet the requirements of UL APPROVAL FOR OFNR.
Packing And Mark
OYI cables are coiled on bakelite, wooden, or ironwood drums. During transportation, the right tools should be used to avoid damaging the package and to handle them with ease. Cables should be protected from moisture, kept away from high temperatures and fire sparks, protected from over-bending and crushing, and protected from mechanical stress and damage. It is not allowed to have two lengths of cable in one drum, and both ends should be sealed. The two ends should be packed inside the drum, and a reserve length of cable not less than 3 meters should be provided.
The color of cable markings is white. The printing shall be carried out at intervals of 1 meter on the outer sheath of the cable. The legend for the outer sheath marking can be changed according to the user's requests.
Test report and certification provided.
-
SC Type
Fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link fiber optic cables or fiber optic connectors between two fiber optic lines. It contains the interconnect sleeve that holds two ferrules together. By precisely linking two connectors, fiber optic adapters allow the light sources to be transmitted at their maximum and minimize the loss as much as possible. At the same time, fiber optic adapters have the advantages of low insertion loss, good interchangeability, and reproducibility. They are used to connect optical fiber connectors such as FC, SC, LC, ST, MU, MTRJ, D4, DIN, MPO, etc. They are widely used in optical fiber communications equipment, measuring appliances, and so on. The performance is stable and reliable.
-
FTTH Pre-Connectorized Drop Patchcord
Pre-Connectorized Drop cable is over the ground fiber optic drop cable equipped with fabricated connector on both ends, packed in certain length, and used for distributing optical signal from Optical Distribution Point (ODP) to Optical Termination Premise (OTP) in customer’s House.
According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC.
Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as FTTX and LAN etc.
-
OYI-ODF-SR-Series Type
The OYI-ODF-SR-Series type optical fiber cable terminal panel is used for cable terminal connection and can also be used as a distribution box. It has a 19″ standard structure and is rack-mounted with a drawer structure design. It allows for flexible pulling and is convenient to operate. It is suitable for SC, LC, ST, FC, E2000 adapters, and more.
The rack mounted optical cable terminal box is a device that terminates between the optical cables and the optical communication equipment. It has the functions of splicing, termination, storing, and patching of optical cables. The SR-series sliding rail enclosure allows for easy access to fiber management and splicing. It is a versatile solution available in multiple sizes (1U/2U/3U/4U) and styles for building backbones, data centers, and enterprise applications.
-
OYI A Type Fast Connector
Our fiber optic fast connector, the OYI A type, is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly and can provide open flow and precast types, with optical and mechanical specifications that meet the standard for optical fiber connectors. It is designed for high quality and high efficiency during installation, and the structure of the crimping position is a unique design.
-
Anchoring Clamp PA1500
The anchoring cable clamp is a high-quality and durable product. It consists of two parts: a stainless steel wire and a reinforced nylon body made of plastic. The body of the clamp is made of UV plastic, which is friendly and safe to use even in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 8-12mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly.
FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests.
-
OYI-OCC-D Type
Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross-connection cabinets will be widely deployed and move closer to the end user.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.