310GR

XPON ONU

310GR

ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON Realtek chipset and has high reliability, easy management, flexible configuration, robustness, good quality service guarantee (Qos).
XPON has G / E PON mutual conversion function, which is realized by pure software.

Product Detail

FAQ

Product Tags

Product Features

1.Comply fully with ITU-G.984.1/2/3/4 standard and G.987.3 protocol.
2.Support downlink 2.488 Gbits/s rate and uplink 1.244 Gbits/s rate.
3.Support bidirectional FEC and RS (255,239) FEC CODEC.
4.Support 32 TCONT and 256 GEMPORT.
5.Support AES128 decryption function of G.984 standard.
6.Support SBA and DBA dynamically broadband allocation.
7.Support the PLOAM function of G.984 standard.
8.Support Dying-Gasp check and report.
9.Support synchronous Ethernet.
10.Good interworking with the OLT from different manufacturers，such as huawei, ZTE, Cortina etc .
11.Down-link LAN ports:1*10/100/1000M with auto-negotiation.
12.Support the rogue ONU alarm function.
13.Support 1K MAC address table.

Basic Characteristics

1.LAN 1000Base-T.

2.Switch to Switch Interface.

3.Router/Server interface.

4.witched backplane applications.

Tech parameters	Description
Up-link interface	1.XPON interface，Sc single mode single fiber RX 2.488 Gbits/s rate and TX 1 . 244 Gbits/s rate Fiber type Sc/pc optical power ：1 ~ 4 dBm sensitivity： - 28dBm safety: ONU authentication mechanism
wavelength (nm)	TX 1310nm，RX 1490nm
Fiber connector	Sc connector
Down- link data interface	1 pcs 10/100/1000Mbps auto-negotiation Ethernet interface, RJ45 interface
Indicator LED	4 pcs, refer to NO. 6 def nition of indicator LED
DC Supply interface	input ＋12V 0.5A , footprint： DC0005 ø2 .1MM
power	≤2. 5W
operating temperature	- 5 ～+55℃
Humidity	10 ~ 85% (non -condensation)
storage temperature	- 30 ~ +60℃
Dimension (MD)	108＊85＊25.3 (mainframe )
weight	0.1kg (mainframe)

Indicator LED Definition

Symbol	Color	Meaning
PWR	Green	ON: successfully connect with power OFF: fail to connect with power
PON	Green	ON: ONU port Link correctly Flicker: PON registering OFF: ONU ports link faulty
LAN	Green	ON: Link up correctly Flicker: data is transmitting OFF: link down faulty
LOS	Red	Flicker: fail to connect with PON port OFF: detected fiber to input
CATV	Green	Input optical power：0~ -15DBm
	Red	Input optical power：≥0DBm，or -15DBm≥

ONU Weight Table

Product form	Model NO.	Weight (kg)	Bare weight （kg)		Size		Carton
				Product: （mm）	Package： (mm)	Carton size (mm)	Quantity (pcs)	Weight (kg)
1LAN ONU	310GR	0.2	0.08	1088525	12311261	595234	100	21.7
1LAN ONU	312GDR	0.2	0.08	1088525	12311261	595234	100	21.7

Packing List

Name	Quantity	Unit
XPON ONU	1	pcs
Supply power	1	pcs
Manual & Warranty Card	1	pcs

Ordering information

Model NO.

Function and Interface

LAN Ports

Type of Fiber

Default

Mode

310GR

1GE

1GE RJ45

1 UP LINK XPON, BOSA

UPC/APC

HGU

312GDR

1GE+1WDM CATV

1GE RJ45

1 UP LINK XPON, BOSA

UPC/APC

HGU

Products Recommended

3213GER

ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, ONU is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON Realtek chip set and has high reliability， easy management，flexible configuration，robustness，good quality service guarantee(Qos).

VIEW MORE
OPGW Optical Ground Wire

Layered stranded OPGW is one or more fiber-optic stainless steel units and aluminum-clad steel wires together, with stranded technology to fix the cable, aluminum-clad steel wire stranded layers of more than two layers, the product features can accommodate multiple fiber-optic unit tubes, fiber core capacity is large. At the same time, the cable diameter is relatively large, and the electrical and mechanical properties are better. The product features light weight, small cable diameter and easy installation.

VIEW MORE
drop cable

Drop Fiber Optic Cable 3.8 mm constructed one single strand of fiber with 2.4 mm loose tube, protected aramid yarn layer is for strength and physical support. Outer jacket made of HDPE materials that use in applications where smoke emission and toxic fumes could pose a risk to human health and essential equipment in the event of a fire.

VIEW MORE
FTTH Drop Cable Suspension Tension Clamp S Hook

FTTH fiber optic drop cable suspension tension clamp S hook clamps are also called insulated plastic drop wire clamps. The design of the dead-ending and suspension thermoplastic drop clamp includes a closed conical body shape and a flat wedge. It is connected to the body through a flexible link, ensuring its captivity and an opening bail. It is a kind of drop cable clamp that is widely used for both indoor and outdoor installations. It is provided with a serrated shim to increase hold on the drop wire and used to support one and two pair telephone drop wires at span clamps, drive hooks, and various drop attachments. The prominent advantage of the insulated drop wire clamp is that it can prevent electrical surges from reaching the customer premises. The working load on the support wire is effectively reduced by the insulated drop wire clamp. It is characterized by good corrosion resistant performance, good insulating properties, and long life service.

VIEW MORE
OYI-FAT12A Terminal Box

The 12-core OYI-FAT12A optical terminal box performs in accordance with the industry-standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.

VIEW MORE
Loose Tube Armored Flame-retardant Direct Burie...

The fibers are positioned in a loose tube made of PBT. The tubes are filled with a water-resistant filling compound. A steel wire or FRP is located in the center of the core as a metallic strength member. The tubes and the fillers are stranded around the strength member into a compact and circular core. An Aluminum Polyethylene Laminate (APL) or steel tape is applied around the cable core, which is filled with filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE (LSZH) outer sheath.(WITH DOUBLE SHEATHS)

VIEW MORE

If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.

INQUIRE