0755-23179541 
sales@oyii.net.png)
8618926041961
OYI3434G4R
XPON ONU DUAL BAND
OYI3434G4R
Product Description
ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol,ONU is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON REALTEK chipset and has high reliability , easy management, flexible configuration, robustness, good quality service guarantee(Qos).
This ONU supports WIFI4 (IEEE802.11b/g/n) and WIFI5 (IEEE802.11ac) concurrently ,a WEB system provided simplifies the configuration of the WIFI and connects to INTERNET conveniently for users.
ONU supports the G/E PON switching function automatically.
ONU supports a RJ11 interface for VOIP applications application.
Product Features
1.Comply fully with ITU-G.984.1/2/3/4 standard and G.987.3 protocol.
2.Support downlink 2.488 Gbits/s rate and uplink 1.244 Gbits/s rate.
3.Support bidirectional FEC and RS(255,239) FEC CODEC.
4.Support 32 TCONT and 32 GEMPORT.
5.Support AES128 decryption function of G.984 standard.
6.Support SBA and DBA dynamically broadband allocation.
7.Support the PLOAM function of G.984 standard.
8.Support Dying-Gasp check and report.
9.Support synchronous Ethernet.
10.Good interworking with the OLT from different manufacturers, such as HuaWei, ZTE, Cortina etc.
11.Down-link LAN ports: 4*10/100/1000M with auto-negotiation.
12.Support the rogue ONU alarm function.
13.Support VLAN function.
14.Operation mode: HGU.
15.Support IEEE802.11b/g/n and IEEE802.11ac standard for WIFI.
16.Antennas gain: 5DBi with external.
17.Support: 300Mbps PHY rate IEEE802.11n, 866Mbps PHY rate IEEE802.11ac.
18.Support multiply SSID.
19.Multiple encryption methods:WFA、WPA、WPA2、WAPI.
20.One port for VOIP, support SIP protocol optional.
21.Comply fully with IEEE802.3ah standard and CTC-3.0 specification.
Basic Characteristics
|
Tech parameters |
Description |
|
|
1 |
Up-link Interface (XPON use the GPON spec) |
1 GPON interface，SC single mode single fiber RX 2.488 Gbits/s rate and TX 1.244 Gbits/s rate. Fiber type：SC/APC Optical power：0~4 dBm Sensitivity：-28 dBm safety: ONU authentication mechanism |
|
2 |
Wavelength(nm) |
TX 1310nm，RX 1490nm |
|
3 |
Fiber Connector |
SC/UPC or SC/APC connector |
|
4 |
Down-link Data Interface |
4*10/100/1000M auto-negotiation Ethernet interface, RJ45 interface |
|
5 |
Indicator LED |
11 pcs，refer to NO.6 definition of indicator LED |
|
6 |
DC Supply Interface |
input＋12V 1A，footprint：DC0005 ø2.1MM |
|
7 |
Power |
≤7W |
|
8 |
Operating Temperature |
-5～+55℃ |
|
9 |
Humidity |
10～85%（non-condensation） |
|
10 |
Storage Temperature |
-30～+70℃ |
|
11 |
Dimension（MM） |
185*125*32mm（mainframe) |
|
12 |
Weight |
0.5Kg（mainframe） |
WIFI Characteristics
|
Tech features |
Description |
|
|
1 |
Antenna |
2T2R Mode; gain:5dBi |
|
3 |
Encryption Methods |
WFA、WPA、WPA2、WAPI |
|
4 |
Tx Power |
17dBm for 2.4GHz ;19dBm for 5GHz |
|
5 |
Rx Sensitivity |
WIFI4：-59dBm @ channel 11 MCS7; WIFI5：-50dBm @ channel 155 AC80; |
|
6 |
WPS Function |
Support |
VOIP Technical Features
|
Tech Features |
Description |
|
|
1 |
Voltage and Current Monitoring |
The continuously monitors the TIP, RING, and battery voltages and currents via an on-chip Monitor ADC |
|
3 |
Thermal Overload Shutdown |
Ifthe die temperature exceeds the maximum junction temperature threshold, the device will shut itself down |
|
5 |
Protocol |
Protocol : SIP; Codec type selection :G722,G729,,G711A,G711U, FAX:T38; |
Definition of Indicator LED
|
Symbol |
Color |
Meaning |
|
PWR |
Green |
ON:successfully connect with power OFF:fail to connect with power |
|
PON |
Green |
ON:ONU port Link correctly Flicker: PON registering OFF:ONU ports link faulty |
|
LAN |
Green |
ON: Link up correctly Flicker: data is transmitting OFF: link down faulty |
|
TEL |
Green |
ON: Register success OFF:Register fail |
|
WIFI |
Green |
ON: WIFI is running OFF:WIFI startup fail |
|
LOS |
Red |
Flicker: fail to connect with PON port OFF: detected fiber to input |
ONU Weight Table
|
Product Form |
Model NO. |
Weight( kg) |
Bare Weight （kg) |
|
Size |
|
Carton |
|
|
Product: （mm） |
Package： (mm) |
Carton Size(cm) |
Quantity |
Weight( kg) |
||||
|
4LAN ONU |
OYI344G4R |
0.50 |
0.30 |
185*125*32 |
215*200*43 |
51*49*44 |
40 |
22.1 |
|
4LAN ONU |
OYI3434G4R |
0.50 |
0.30 |
185*125*32 |
215*200*43 |
51*49*44 |
40 |
22.1 |
|
4LAN ONU |
OYI3424G4DER |
0.50 |
0.30 |
185*125*32 |
215*200*43 |
51*49*44 |
40 |
22.1 |
|
4LAN ONU |
OYI34234G4DER |
0.50 |
0.30 |
185*125*32 |
215*200*43 |
51*49*44 |
40 |
22.1 |
Packing List
|
Name |
Quantity |
Unit |
|
XPON ONU |
1 |
pcs |
|
Supply Power |
1 |
pcs |
|
Manual & Warranty Card |
1 |
pcs |
Ordering information
|
Model NO. |
Function and Interface |
Type of Fiber |
Default Communication Mode |
|
OYI344G4ER |
4LAN, 4GE+AC 1200M WIFI+2*2 MIMO |
1 UP LINK XPON ,BOSA UPC/APC |
HGU |
|
OYI3434G4R |
4LAN, 4GE+AC 1200M WIFI+VOIP+2*2 MIMO |
1 UP LINK XPON ,BOSA UPC/APC |
HGU |
|
OYI3424G4DER |
4LAN, 4GE+AC 1200M WIFI+WDM CATV+2*2 MIMO |
1 UP LINK XPON ,BOSA UPC/APC |
HGU |
|
OYI34234G4DER |
4LAN, 4GE+AC 1200M WIFI+VOIP+WDM CATV+2*2 MIMO |
1 UP LINK XPON ,BOSA UPC/APC |
HGU |
-
10/100Base-TX Ethernet Port to 100Base-FX Fiber...
MC0101G fiber Ethernet media converter creates a cost-effective Ethernet to fiber link, transparently converting to/from 10Base-T or 100Base-TX or 1000Base-TX Ethernet signals and 1000Base-FX fiber optical signals to extend an Ethernet network connection over a multimode/single mode fiber backbone.MC0101G fiber Ethernet media converter supports maximum multimode fiber optic cable distance of 550m or a maximum single mode fiber optic cable distance of 120km providing a simple solution for connecting 10/100Base-TX Ethernet networks to remote locations using SC/ST/FC/LC terminated single mode/multimode fiber, while delivering solid network performance and scalability.Easy to set-up and install, this compact, value-conscious fast Ethernet media converter features auto. switching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode speed, full and half duplex. -
OYI-FAT 24C
This box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system. It intergates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building. -
Fiber Optic Accessories Pole Bracket For Fixati...
It is a type of pole bracket made of high carbon steel. It is created through continuous stamping and forming with precision punches, resulting in accurate stamping and a uniform appearance. The pole bracket is made of a large diameter stainless steel rod that is single-formed through stamping, ensuring good quality and durability. It is resistant to rust, aging, and corrosion, making it suitable for long-term use. The pole bracket is easy to install and operate without the need for additional tools. It has many uses and can be used in various locations. The hoop fastening retractor can be fastened to the pole with a steel band, and the device can be used to connect and fix the S-type fixing part on the pole. It is light weight and has a compact structure, yet is strong and durable. -
Anchoring Clamp OYI-TA03-04 Series
This OYI-TA03 and 04 cable clamp is made of high-strength nylon and 201 stainless steel, suitable for circular cables with a diameter of 4-22mm. Its biggest feature is the unique design of hanging and pulling cables of different sizes through the conversion wedge, which is firm and durable. The optical cable is used in ADSS cables and various types of optical cables, and is easy to install and use with high cost-effectiveness. The difference between 03 and 04 is that 03 steel wire hooks from the outside to the inside, while 04 type wide steel wire hooks from the inside to the outside -
GJYFKH
-
Direct Bury (DB) 7-way 7/3.5mm
A bundle of micro- or mini-tubes with strengthened wall thickness is encased in a single thin HDPE sheath, forming a duct assembly specifically engineered for fiber optical cable deployment. This robust design enables versatile installation—either retrofitted into existing ducts or directly buried underground—supporting seamless integration into fiber optical cable networks. The micro ducts are optimized for high-efficiency fiber optical cable blowing, featuring an ultra-smooth inner surface with low-friction properties to minimize resistance during air-assisted cable insertion. Each micro duct is color-coded per Figure 1, facilitating quick identification and routing of fiber optical cable types (e.g., single-mode, multi-mode) during network installation and maintenance.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
