0755-23179541 
sales@oyii.net
OYI-FOSC-D109H
Fiber Optic Splice Closure Heat Shrink Type Dome Closure
OYI-FOSC-D109H
Product Features
1.High-quality PC, ABS, and PPR materials are optional, which can ensure harsh conditions such as vibration and impact.
2.Structural parts are made of high-quality stainless steel, providing high strength and corrosion resistance, making them suitable for various environments.
3.The structure is strong and reasonable, with a heat shrinkable sealing structure that can be opened and reused after sealing.
4.It is well water and dust-proof, with a unique grounding device to ensure sealing performance and convenient installation.The protection grade reaches IP68.
5.The splice closure has a wide application range, with good sealing performance and easy installation. It is produced with high-strength engineering plastic housing that is anti-aging, corrosion-resistant, high-temperature resistant, and has high mechanical strength.
6.The box has multiple reuse and expansion functions, allowing it to accommodate various core cables.
7.The splice trays inside the closure are turn-able like booklets and have adequate curvature radius and space for winding optical fiber, ensuring a curvature radius of 40mm for optical winding.
8.Each optical cable and fiber can be operated individually.
9.Sealed silicone rubber and sealing clay are used for reliable sealing and convenient operation during the opening of the pressure seal.
10.The closure is of small volume, big capacity, and convenient maintenance. The elastic rubber seal rings inside the closure have good sealing and sweat-proof performance. The casing can be opened repeatedly without any air leakage. No special tools are required. The operation is easy and simple. An air valve is provided for the closure and is used to check the sealing performance.
Specifications
|
Item No. |
OYI-FOSC-D109H |
|
Size (mm) |
Φ305*520 |
|
Weight (kg) |
4.25 |
|
Cable Diameter (mm) |
Φ7~Φ40 |
|
Cable Ports |
1 in (40*81mm), 8 out (30mm) |
|
Max Capacity Of Fiber |
288 |
|
Max Capacity Of Splice |
24 |
|
Max Capacity Of Splice Tray |
12 |
|
Cable Entry Sealing |
Heat-shrinking |
|
Life span |
More Than 25 Years |
Applications
1.Telecommunications, railway, fiber repair, CATV, CCTV, LAN, FTTX.
2.Using communication cable lines overhead, underground, direct-buried, and so on.
Optional Accessories
Standard Accessories
Tag paper: 1pc
Sand paper : 1pc
Silver paper: 1pc
Insulating tape: 1pc
Cleaning tissue: 1pc
Cable ties: 3mm*10mm 12pcs
Fiber protective tube: 6pcs
Heat-shrink tubing: 1bag
Heat-shrink sleeve: 1.0mm*3mm*60mm 12-288pcs
Pole mounting（A）
Pole mounting（B）
Pole mounting（C）
Wall mounting
Aerial mounting
Packaging Information
1.Quantity: 4pcs/Outer box.
2.Carton Size: 60*47*50cm.
3.N.Weight: 17kg/Outer Carton.
4.G.Weight: 18kg/Outer Carton.
5.OEM service available for mass quantity, can print logo on cartons.
Inner Box
Outer Carton
-
OYI-FAT F24C
This box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system.
It intergtates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building.
-
FTTH Pre-Connectorized Drop Patchcord
Pre-Connectorized Drop cable is over the ground fiber optic drop cable equipped with fabricated connector on both ends, packed in certain length, and used for distributing optical signal from Optical Distribution Point (ODP) to Optical Termination Premise (OTP) in customer’s House.
According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC.
Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as FTTX and LAN etc.
-
Loose Tube Non-metallic & Non-armored Fibe...
The structure of the GYFXTY optical cable is such that a 250μm optical fiber is enclosed in a loose tube made of high modulus material. The loose tube is filled with waterproof compound and water-blocking material is added to ensure longitudinal water-blocking of the cable. Two glass fiber reinforced plastics (FRP) are placed on both sides, and finally, the cable is covered with a polyethylene (PE) sheath through extrusion.
-
OYI-FOSC H10
The OYI-FOSC-03H Horizontal fiber optic splice closure has two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man-well of pipeline, and embedded situations, etc. Comparing with a terminal box, the closure requires much stricter requirements for sealing. Optical splice closures are used to distribute, splice, and store the outdoor optical cables that enter and exit from the ends of the closure.
The closure has 2 entrance ports and 2 output ports. The shell of the product is made from ABS+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
-
OYI-OCC-G Type （24-288）steel TYPE
Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross connection cabinets will be widely deployed and move closer to the end user.
-
All Dielectric Self-Supporting Cable
The structure of ADSS (single-sheath stranded type) is to place 250um optical fiber into a loose tube made of PBT, which is then filled with waterproof compound. The center of the cable core is a non-metallic central reinforcement made of fiber-reinforced composite (FRP). The loose tubes (and filler rope) are twisted around the central reinforcing core. The seam barrier in the relay core is filled with water-blocking filler, and a layer of waterproof tape is extruded outside the cable core. Rayon yarn is then used, followed by extruded polyethylene (PE) sheath into the cable. It is covered with a thin polyethylene (PE) inner sheath. After a stranded layer of aramid yarns is applied over the inner sheath as a strength member, the cable is completed with a PE or AT (anti-tracking) outer sheath.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
