0755-23179541 
sales@oyii.net
OYI-FAT-10A Terminal Box
Optic Fiber Terminal/Distribution Box
OYI-FAT-10A Terminal Box
Product Features
1.User familiar industry interface, using high impact plastic ABS.
2.Wall and pole mountable.
3.No need screws, it is easy to close and open.
4.The high strength plastic, anti ultraviolet radiation and ultraviolet radiation resistant, resistant to rain.
Application
1.Widely used in FTTH access network.
2.Telecommunication Networks.
3.CATV Networks Data communications Networks.
4.Local Area Networks.
Product Parameter
|
Dimension (L×W×H) |
205.4mm×209mm×86mm |
|
Name |
|
|
Material |
ABS+PC |
|
IP Grade |
IP65 |
|
Max ratio |
1:10 |
|
Max capacity(F) |
10 |
|
SC Simplex or LC Duplex |
|
|
Tensile strength |
>50N |
|
Colour |
Black and White |
|
Environment |
Accessories: |
|
1. Temperature: -40 C— 60 C |
1. 2 hoops (outdoor air frame) Optional |
|
2. Ambient Humidity: 95% above 40 。C |
2.wall mount kit 1 set |
|
3. Air pressure: 62kPa—105kPa |
3.two lock keys used waterproof lock |
Optional Accessories
Packaging Information
Inner Box
Outer Carton
-
SC Type
Fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link fiber optic cables or fiber optic connectors between two fiber optic lines. It contains the interconnect sleeve that holds two ferrules together. By precisely linking two connectors, fiber optic adapters allow the light sources to be transmitted at their maximum and minimize the loss as much as possible. At the same time, fiber optic adapters have the advantages of low insertion loss, good interchangeability, and reproducibility. They are used to connect optical fiber connectors such as FC, SC, LC, ST, MU, MTRJ, D4, DIN, MPO, etc. They are widely used in optical fiber communications equipment, measuring appliances, and so on. The performance is stable and reliable.
-
3213GER
ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, ONU is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON Realtek chip set and has high reliability， easy management，flexible configuration，robustness，good quality service guarantee(Qos).
-
XPON ONU
1G3F WIFI PORTS is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier class FTTH application provides data service access. 1G3F WIFI PORTS is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it can access to the EPON OLT or GPON OLT.1G3F WIFI PORTS adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
1G3F WIFI PORTS is compliant with IEEE802.11n STD, adopts with 2×2 MIMO, the highest rate up to 300Mbps. 1G3F WIFI PORTS is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.1G3F WIFI PORTS is designed by ZTE chipset 279127. -
Wire Rope Thimbles
Thimble is a tool that is made to maintain the shape of a wire rope sling eye in order to keep it safe from various pulling, friction, and pounding. Additionally, this thimble also has the function of protecting the wire rope sling from being crushed and eroded, allowing the wire rope to last longer and be used more frequently.
Thimbles have two main uses in our daily lives. One is for wire rope, and the other is for guy grip. They are called wire rope thimbles and guy thimbles. Below is a picture showing the application of wire rope rigging.
-
Multi-Purpose Distribution cable GJFJV(H)
GJFJV is a multi-purpose distribution cable that uses several φ900μm flame-retardant tight buffer fibers as optical communication medium. The tight buffer fibers are wrapped with a layer of aramid yarn as strength member units, and the cable is completed with a PVC, OPNP, or LSZH (Low smoke, Zero halogen, Flame-retardant) jacket.
-
OYI-F401
Optic patch panel provides branch connection for fiber termination. It is an integrated unit for fiber management, and can be used as distribution box. It divides into fix type and sliding-out type. This equipment function is to fix and manage the fiber optic cables inside the box as well as provide protection. Fiber optic termination box is modular so they are applicable to your existing systems without any modification or additional work.
Suitable for installation of FC, SC, ST, LC, etc. adaptors, and suitable for fiber optic pigtail or plastic box type PLC splitters.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
