0755-23179541 
sales@oyii.net
OYI-F235-16Core
Fiber Optic Distribution Box
OYI-F235-16Core
Product Features
1.Total enclosed structure.
2.Material: ABS, wet-proof, water-proof, dust proof, anti-aging, protection level up to IP65.
3.Clamping for feeder cable and drop cable, fiber splicing, fixation, storage distribution etc all in one.
4.Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type SC adaptor ,installation, easy maintenance.
5.Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
6. Box can be installed by the way of wall-mounted or poled-mounted,suitable for both indoor and outdoor uses.
Configuration
|
Material |
Size |
Max Capacity |
Nos of PLC |
Nos of Adaptor |
Weight |
Ports |
|
Strengthen ABS |
A*B*C(mm) 319*215*133 |
16 ports |
/ |
16 pcs Huawei Adapter |
1.6kg |
4 in 16 out |
Standard Accessories
Screw: 4mm*40mm 4pcs
Expension bolt: M6 4pcs
Cable tie: 3mm*10mm 6pcs
Heat-shrink sleeve: 1.0mm*3mm*60mm 16pcs
Metal ring: 2pcs
Key: 1pc
Packing information
|
PCS/CARTON |
Gross Weight（Kg） |
Net Weight（Kg） |
Carton Size（cm） |
Cbm（m³） |
|
6 |
10 |
9 |
52.5*35*53 |
0.098 |
Inner Box
Outer Carton
-
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.
-
OYI-ODF-MPO RS288
OYI-ODF-MPO RS 288 2U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 2U height for 19 inch rack mounted application. It has 6pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 24pcs MPO cassettes HD-08 for max. 288 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel.
-
Dead end Guy Grip
Dead-end preformed is widely used for the installation of bare conductors or overhead insulated conductors for transmission and distribution lines. The reliability and economic performance of the product are better than the bolt type and hydraulic type tension clamp that are widely used in the current circuit. This unique, one-piece dead-end is neat in appearance and free from bolts or high-stress holding devices. It can be made of galvanized steel or aluminum clad steel.
-
OYI-FOSC HO7
The OYI-FOSC-02H horizontal fiber optic splice closure has two connection options: direct connection and splitting connection. It is applicable in situations such as overhead, man-well of pipeline, and embedded situations, among others. Comparing with a terminal box, the closure requires much stricter sealing requirements. Optical splice closures are used to distribute, splice, and store outdoor optical cables that enter and exit from the ends of the closure.
The closure has 2 entrance ports. The shell of the product is made from ABS+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
-
Multi Purpose Distribution Cable GJPFJV(GJPFJH )
The multi-purpose optical level for wiring uses subunits, which consist of medium 900μm tight sleeved optical fibers and aramid yarn as reinforcement elements. The photon unit is layered on the non-metallic center reinforcement core to form the cable core, and the outermost layer is covered with a low smoke, halogen-free material (LSZH) sheath that is flame retardant.(PVC)
-
OYI-ATB02B Desktop Box
OYI-ATB02B double-port terminal box is developed and produced by the company itself. The product’s performance meets the requirements of industry standards YD/T2150-2010. It is suitable for installing multiple types of modules and can be applied to the work area wiring subsystem to achieve dual-core fiber access and port output. It provides fiber fixing, stripping, splicing, and protection devices, and allows for a small amount of redundant fiber inventory, making it suitable for FTTD (fiber to the desktop) system applications. It uses embedded surface frame, easy to install and disassemble, it is with protective door and dusty free. The box is made of high-quality ABS plastic through injection molding, making it anti-collision, flame retardant, and highly impact-resistant. It has good sealing and anti-aging properties, protecting the cable exit and serving as a screen. It can be installed on the wall.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
