0755-23179541 
sales@oyii.net
OYI-F234-8Core
Fiber Optic Distribution Box
OYI-F234-8Core
Product Features
1.Total enclosed structure.
2.Material: ABS, wet-proof, water-proof, dust proof, anti-aging, protection level up to IP65.
3.Clamping for feeder cable and drop cable, fiber splicing, fixation, storage distribution etc all in one.
4.Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type SC adaptor ,installation, easy maintenance.
5.Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
6. Box can be installed by the way of wall-mounted or poled-mounted,suitable for both indoor and outdoor uses.
Configuration
|
Material |
Size |
Max Capacity |
Nos of PLC |
Nos of Adaptor |
Weight |
Ports |
|
Strengthen ABS |
A*B*C(mm) 299*202*98 |
8 ports |
/ |
8 pcs Huawei Adapter |
1.2kg |
4 in 8 out |
Standard Accessories
Screw: 4mm*40mm 4pcs
Expension bolt: M6 4pcs
Cable tie:3mm*10mm 6pcs
Heat-shrink sleeve:1.0mm*3mm*60mm 8pcs
Metal ring：2pcs
Key:1pc
Packing information
|
PCS/CARTON |
Gross Weight（Kg） |
Net Weight（Kg） |
Carton Size（cm） |
Cbm（m³） |
|
6 |
8 |
7 |
50.5*32.5*42.5 |
0.070 |
Inner Box
Outer Carton
-
OYI-FOSC-D109M
The OYI-FOSC-D109M dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
The closure has 10 entrance ports on the end (8 round ports and 2 oval port). The shell of the product is made from ABS/PC+ABS material. The shell and the base are sealed by pressing the silicone rubber with the allocated clamp. The entry ports are sealed by heat-shrinkable tubes. The closures can be opened again after being sealed and reused without changing the sealing material.
The closure’s main construction includes the box, splicing, and it can be configured with adapters and optical splitters.
-
10/100Base-TX Ethernet Port to 100Base-FX Fiber...
MC0101F fiber Ethernet media converter creates a cost-effective Ethernet to fiber link, transparently converting to/ from 10 Base-T or 100 Base-TX Ethernet signals and 100 Base-FX fiber optical signals to extend an Ethernet network connection over a multimode/single mode fiber backbone.
MC0101F fiber Ethernet media converter supports maximum multimode fiber optic cable distance of 2km or a maximum single mode fiber optic cable distance of 120 km, providing a simple solution for connecting 10/100 Base-TX Ethernet networks to remote locations using SC/ST/FC/LC-terminated single mode/multimode fiber, while delivering solid network performance and scalability.
Easy to set-up and install, this compact, value-conscious fast Ethernet media converter features autos witching MDI and MDI-X support on the RJ45 UTP connections as well as manual controls for UTP mode, speed, full and half duplex. -
Outdoor Self-supporting Bow-type drop cable GJY...
The optical fiber unit is positioned in the center. Two parallel Fiber Reinforced (FRP/steel wire) are placed on the two sides. A steel wire (FRP) is also applied as the additional strength member. Then, the cable is completed with a black or colored Lsoh Low Smoke Zero Halogen(LSZH) out sheath.
-
Indoor Bow-type drop cable
The structure of indoor optical FTTH cable is as follows: in the center is the optical communication unit.Two parallel Fiber Reinforced (FRP/Steel wire) are placed on the two sides. Then, the cable is completed with a black or colored Lsoh Low Smoke Zero Halogen (LSZH)/PVC sheath.
-
OYI B Type Fast Connector
Our fiber optic fast connector, OYI B type, is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly and can provide open flow and precast types, with optical and mechanical specifications that meet the standard for optical fiber connectors. It is designed for high quality and high efficiency during installation, with a unique design for the crimping position structure.
-
Ear-Lokt Stainless Steel Buckle
Stainless steel buckles are manufactured from high quality type 200, type 202, type 304, or type 316 stainless steel to match the stainless steel strip. Buckles are generally used for heavy duty banding or strapping. OYI can emboss customers’ brand or logo onto the buckles.
The core feature of the stainless steel buckle is its strength. This feature is due to the single stainless steel pressing design, which allows for construction without joins or seams. The buckles are available in matching 1/4″, 3/8″, 1/2″, 5/8″, and 3/4″ widths and, with the exception of the 1/2″ buckles, accommodate the double-wrap application to solve heavier duty clamping requirements.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
