0755-23179541 
sales@oyii.net
OYI-DIN-00 Series
Fiber Optic DIN Rail Terminal Box
OYI-DIN-00 Series
Specification
|
Model |
Dimension |
Material |
Adapter port |
Splicing capacity |
Cable port |
Application |
|
DIN-00 |
133x136.6x35mm |
Aluminum |
12 SC simplex |
Max. 24 fibers |
4 ports |
DIN rail mounted |
Accessories
|
Item |
Name |
Specification |
Unit |
Qty |
|
1 |
Heat shrinkable protection sleeves |
45*2.6*1.2mm |
pcs |
As per using capacity |
|
2 |
Cable tie |
3*120mm white |
pcs |
2 |
Drawings: (mm)
Cable management drawings
1. Fiber optic cable 2. stripping out optical fiber 3. fiber optic pigtail
4. splice tray 5. heat shrinkable protection sleeve
Packing information
Inner Box
Outer Carton
-
OYI E Type Fast Connector
Our fiber optic fast connector, OYI E type, is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly that can provide open flow and precast types. Its optical and mechanical specifications meet the standard optical fiber connector. It is designed for high quality and high efficiency during installation.
-
OYI C Type Fast Connector
Our fiber optic fast connector OYI C type is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly. It can provide open flow and precast types, whose optical and mechanical specifications meet the standard optical fiber connector. It is designed for high quality and high efficiency for installation.
-
Armored Optic Cable GYFXTS
Optical fibers are housed in a loose tube that is made of high-modulus plastic and filled with water blocking yarns. A layer of non-metallic strength member is stranding around the tube, and the tube is armored with the plastic coated steel tape. Then a layer of PE outer sheath is extruded.
-
FTTH Pre-Connectorized Drop Patchcord
Pre-Connectorized Drop cable is over the ground fiber optic drop cable equipped with fabricated connector on both ends, packed in certain length, and used for distributing optical signal from Optical Distribution Point (ODP) to Optical Termination Premise (OTP) in customer’s House.
According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC.
Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as FTTX and LAN etc.
-
OYI-FOSC-D109H
The OYI-FOSC-D109H dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
The closure has 9 entrance ports on the end (8 round ports and 1 oval port). The shell of the product is made from PP+ABS material. The shell and the base are sealed by pressing the silicone rubber with the allocated clamp. The entry ports are sealed by heat-shrinkable tubes. The closures can be opened again after being sealed and reused without changing the sealing material.
The closure’s main construction includes the box, splicing, and it can be configured with adapters and optical splitters.
-
All Dielectric Self-Supporting Cable
The structure of ADSS (single-sheath stranded type) is to place 250um optical fiber into a loose tube made of PBT, which is then filled with waterproof compound. The center of the cable core is a non-metallic central reinforcement made of fiber-reinforced composite (FRP). The loose tubes (and filler rope) are twisted around the central reinforcing core. The seam barrier in the relay core is filled with water-blocking filler, and a layer of waterproof tape is extruded outside the cable core. Rayon yarn is then used, followed by extruded polyethylene (PE) sheath into the cable. It is covered with a thin polyethylene (PE) inner sheath. After a stranded layer of aramid yarns is applied over the inner sheath as a strength member, the cable is completed with a PE or AT (anti-tracking) outer sheath.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
