0755-23179541 
sales@oyii.net
MPO / MTP Trunk Cables
Optic Fiber Patch Cord
MPO / MTP Trunk Cables
The Advantage
High-qualified process and test guarantee
High-density applications to save wiring space
Optimum optical network performance
Optimal data center cabling solution application
Product Features
1.Easy to deploy - Factory-terminated systems can save installation and network reconfiguration time.
2.Reliability - use high-standard components to ensure product quality.
3.Factory terminated and tested
4.Allow easy migration from 10GbE to 40GbE or 100GbE
5.Ideal for 400G High-Speed Network connection
6. Excellent repeatability, exchangeability, wearability and stability.
7.Constructed from high quality connectors and standard fibers.
8. Applicable connector: FC, SC, ST, LC and etc.
9. Cable material: PVC, LSZH, OFNR, OFNP.
10. Single-mode or multi-mode available, OS1, OM1, OM2, OM3, OM4 or OM5.
11. Environmentally stable.
Applications
Telecommunication system.
2. Optical communication networks.
3. CATV, FTTH, LAN.
4. Data processing network.
5. Optical transmission system.
6. Test equipment.
NOTE: We can provide specify patch cord which required by customer.
Specifications
MPO/MTP Connectors:
| Type |
Single-mode (APC polish) |
Single-mode (PC polish) |
Multi-mode (PC polish) |
|||
| Fiber Count |
4,8,12,24,48,72,96,144 |
|||||
| Fiber Type |
G652D,G657A1,etc |
G652D,G657A1,etc |
OM1,OM2,OM3,OM4,etc |
|||
| Maximum Insertion Loss (dB) |
Elit/Low Loss |
Standard |
Elit/Low Loss |
Standard |
Elit/Low Loss |
Standard |
|
≤0.35dB 0.25dB Typical |
≤0.7dB 0.5dB Typical |
≤0.35dB 0.25dB Typical |
≤0.7dB 0.5dBTypical |
≤0.35dB 0.2dB Typical |
≤0.5dB 0.35dB Typical |
|
| Operating Wavelength (nm) |
1310/1550 |
1310/1550 |
850/1300 |
|||
| Return Loss (dB) |
≥60 |
≥50 |
≥30 |
|||
| Durability |
≥200 times |
|||||
| Operating Temperature (C) |
-45~+75 |
|||||
| Storage Temperature (C) |
-45~+85 |
|||||
| Conmector |
MTP,MPO |
|||||
| Conmector Type |
MTP-Male,Female;MPO-Male,Female |
|||||
| Polarity |
Type A,Type B,Type C |
|||||
LC/SC/FC Connectors:
| Type |
Single-mode (APC polish) |
Single-mode (PC polish) |
Multi-mode (PC polish) |
|||
| Fiber Count |
4,8,12,24,48,72,96,144 |
|||||
| Fiber Type |
G652D,G657A1,etc |
G652D,G657A1,etc |
OM1,OM2,OM3,OM4,etc |
|||
| Maximum Insertion Loss (dB) |
Low Loss |
Standard |
Low Loss |
Standard |
Low Loss |
Standard |
|
≤0.1dB 0.05dB Typical |
≤0.3dB 0.25dB Typical |
≤0.1dB 0.05dB Typical |
≤0.3dB 0.25dB Typical |
≤0.1dB 0.05dB Typical |
≤0.3dB 0.25dB Typical |
|
| Operating Wavelength (nm) |
1310/1550 |
1310/1550 |
850/1300 |
|||
| Return Loss (dB) |
≥60 |
≥50 |
≥30 |
|||
| Durability |
≥500 times |
|||||
| Operating Temperature (C) |
-45~+75 |
|||||
| Storage Temperature (C) |
-45~+85 |
|||||
Remarks : All MPO/MTP patch cords have 3 kinds of polarity.It are Type A i.e.straight trough type (1-to-1, ..12-to-12.)，and Type B i.e.Cross type (1-to-12, ...12-to-1)，and Type C i.e.Cross Pair type ( 1 to 2,...12 to 11)
Packaging Information
LC -MPO 8F 3M as a reference.
1.1 pc in 1 plastic bag.
2.500 pcs in carton box.
3.Outer carton box size: 46*46*28.5cm, weight: 19kg.
4.OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
Anchoring Clamp JBG Series
JBG series dead end clamps are durable and useful. They are very easy to install and are specially designed for dead-ending cables, providing great support for the cables. The FTTH anchor clamp is designed to fit various ADSS cable and can hold cables with diameters of 8-16mm. With its high quality, the clamp plays a huge role in the industry. The anchor clamp’s main materials are aluminum and plastic, which are safe and environmentally friendly. The drop wire cable clamp has a nice appearance with a silver color and works great. It’s easy to open the bails and fix to the brackets or pigtails, making it very convenient to use without tools and saving time.
-
OYI 3436G4R
ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, ONU is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON REALTEK chipset and has high reliability, easy management, flexible configuration，robustness,good quality service guarantee(Qos).This ONU supports IEEE802.11b/g/n/ac/ax, called WIFI6, concurrently, a WEB system provided simplifi es the configuration of the WIFI and connects to INTERNET conveniently for users.The ONU supports one pots for VOIP application. -
FTTH Pre-Connectorized Drop Patchcord
Pre-Connectorized Drop cable is over the ground fiber optic drop cable equipped with fabricated connector on both ends, packed in certain length, and used for distributing optical signal from Optical Distribution Point (ODP) to Optical Termination Premise (OTP) in customer’s House.
According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC.
Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as FTTX and LAN etc.
-
LGX Insert Cassette Type Splitter
Fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals. It is especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal.
-
OYI C Type Fast Connector
Our fiber optic fast connector OYI C type is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly. It can provide open flow and precast types, whose optical and mechanical specifications meet the standard optical fiber connector. It is designed for high quality and high efficiency for installation.
-
J Clamp J-Hook Small Type Suspension Clamp
OYI anchoring suspension clamp J hook is durable and of good quality, making it a worthwhile choice. It plays an important role in many industrial settings. The main material of the OYI anchoring suspension clamp is carbon steel, and the surface is electro galvanized, allowing it to last for a long period without rusting as a pole accessory. The J hook suspension clamp can be used with the OYI series stainless steel bands and buckles to fix cables onto poles, playing different roles in different places. Different cable sizes are available.
The OYI anchoring suspension clamp can be used to link signs and cable installations on posts. It is electro galvanized and can be used outside for more than 10 years without rusting. There are no sharp edges, and the corners are rounded. All items are clean, rust free, smooth, and uniform throughout, and free from burrs. It plays a huge role in industrial production.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
