0755-23179541 
sales@oyii.net.png)
8618926041961
GYFJH
Indoor & Outdoor Cable
GYFJH
Product Description
The GYFJH radio frequency remote fiber optic cable. The structure of the optical cable is using two or four single-mode or multi-mode fibers which directly covered with low-smoke and halogen-free material to make tight-buffer fiber, each cable uses high-strength aramid yarn as the reinforcing element, and is extruded with a layer of LSZH inner sheath. Meanwhile, in order to fully ensure the roundness and physical and mechanical characteristics of the cable, two aramid fiber filing ropes are placed as reinforcement elements, Sub cable and the filler unit are twisted to form a cable core and then extruded by LSZH outer sheath (TPU or other agreed sheath material is also available upon request).
Cable structure and parameter
|
Item |
Contents |
Unit |
Value |
|
Optical Fiber |
model number |
/ |
G657A1 |
|
number |
/ |
2 |
|
|
Color |
/ |
nature |
|
|
Tight buffer |
color |
/ |
White |
|
material |
/ |
LSZH |
|
|
diameter |
mm |
0.85±0.05 |
|
|
Sub-unit |
Strength member |
/ |
Polyester yarn |
|
Jacket color |
/ |
Yellow、yellow |
|
|
Jacket material |
/ |
LSZH |
|
|
Number |
/ |
2 |
|
|
Diameter |
mm |
2.0±0.1 |
|
|
Fill the rope |
Strength member |
/ |
Polyester yarn |
|
color |
/ |
Black |
|
|
material |
/ |
LSZH |
|
|
Number |
/ |
2 |
|
|
Diameter |
mm |
1.3±0.1 |
|
|
Outer jacket |
Diameter |
mm |
7.0±0.2 |
|
Material |
/ |
LSZH |
|
|
Color |
/ |
Black |
|
|
Tensile performance |
Short term |
N |
Black |
|
|
Long term |
N |
60 |
|
Crush |
Short term |
N/100mm |
30 |
|
|
Long term |
N/100mm |
2200 |
|
Cable attenuation |
dB/km |
≦ 0.4 at 1310nm, ≦ 0.3 at 1550nm |
|
|
Cable weight (Approx.) |
kg/km |
39.3 |
|
Characteristic of Optical Cable
1.Min. bending radius
Static:10 x cable diameter
Dynamic:20 x cable diameter
2.Application temperature range
Operation: -20℃~+70℃
Installation: -10℃ ~+50℃
Storage/transportation: -20℃ ~+70℃
Optical fiber
G657A1 Characteristic of Optical Fiber
|
Item |
|
Unit |
Specification |
|
G. 657A1 |
|||
|
Mode field diameter |
1310nm |
mm |
9.2 ± 0.4 |
|
1550nm |
mm |
10.4 ± 0.5 |
|
|
Cladding diameter |
|
mm |
125.0 ± 0.7 |
|
Cladding non-circularity |
|
% |
<1.0 |
|
Core concentricity error |
|
mm |
<0.5 |
|
Coating diameter |
|
mm |
242 ± 7 |
|
Coating/cladding concentricity error |
|
mm |
<12 |
|
Cable cut-off wavelength |
|
nm |
<1260 |
|
Attenuation |
1310nm |
dB/km |
<0.35 |
|
1550nm |
dB/km |
<0.21 |
|
|
Macro-bend loss (Ø20mm×1) |
1550nm |
dB |
<0.75 |
|
1625nm |
dB |
<1.5 |
PACKAGE AND MARK
PACKAGE
Not allowed two length units of cable in one drum, two ends should be sealed, two ends should be
packed inside drum, reserve length of cable not less than 3 meters.
MARK
Cable shall be permanently marked in English at regular intervals with the following information:
1.Name of manufacturer.
2.Type of cable.
3.Fiber category.
TEST REPORT
Test report and certification supplied on request.
-
OYI J Type Fast Connector
Our fiber optic fast connector, the OYI J type, is designed for FTTH (Fiber to The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly that provides open flow and precast types, meeting the optical and mechanical specifications of standard optical fiber connectors. It is designed for high quality and high efficiency during installation.Mechanical connectors make fiber terminations quick, easy, and reliable. These fiber optic connectors offer terminations without any hassle and require no epoxy, no polishing, no splicing, and no heating, achieving similar excellent transmission parameters as standard polishing and splicing technology. Our connector can greatly reduce the assembly and setup time. The pre-polished connectors are mainly applied to FTTH cables in FTTH projects, directly at the end-user site. -
Loose Tube Corrugated Steel/Aluminum Tape Flame...
The fibers are positioned in a loose tube made of PBT. The tube is filled with a water-resistant filling compound, and a steel wire or FRP is located in the center of the core as a metallic strength member. The tubes (and the fillers) are stranded around the strength member into a compact and circular core. The PSP is longitudinally applied over the cable core, which is filled with filling compound to protect it from water ingress. Finally, the cable is completed with a PE (LSZH) sheath to provide additional protection. -
OYI-OCC-C Type
Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross-connection cabinets will be widely deployed and move closer to the end user. -
OYI-F234-8Core
This box is used as a termination point for the feeder cable to connect with drop cable in FTTX communication network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTX network building. -
OYI A Type Fast Connector
Our fiber optic fast connector, the OYI A type, is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly and can provide open flow and precast types, with optical and mechanical specifications that meet the standard for optical fiber connectors. It is designed for high quality and high efficiency during installation, and the structure of the crimping position is a unique design. -
Fiber Optic Accessories Pole Bracket For Fixati...
It is a type of pole bracket made of high carbon steel. It is created through continuous stamping and forming with precision punches, resulting in accurate stamping and a uniform appearance. The pole bracket is made of a large diameter stainless steel rod that is single-formed through stamping, ensuring good quality and durability. It is resistant to rust, aging, and corrosion, making it suitable for long-term use. The pole bracket is easy to install and operate without the need for additional tools. It has many uses and can be used in various locations. The hoop fastening retractor can be fastened to the pole with a steel band, and the device can be used to connect and fix the S-type fixing part on the pole. It is light weight and has a compact structure, yet is strong and durable.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
