0755-23179541 
sales@oyii.net
Stainless Steel Banding Strapping Tools
Hardware Products
Stainless Steel Banding Strapping Tools
The banding strapping tool is securely used to sign posts, cables, duct work, and packages using wing seals. This heavy-duty banding tool winds the banding around a slotted windlass shaft to create tension. The tool is fast and reliable, featuring a cutter to cut the strap before pushing down the wing seal tabs. It also has a hammer knob to hammer down and close the wing-clip ears/tabs. It can be used with strap widths between 1/4" and 3/4" and is capable of adjusting straps with thicknesses up to 0.030".
Applications
Stainless steel cable tie fastener, tensioning for SS cable ties.
Cable installation.
Specifications
| Item No. | Material | Applicable Steel Strip | |
| Inch | mm | ||
| OYI-T01 | Carbon Steel | 3/4 (0.75), 5/8 (0.63), 1/2 (0.5), | 19mm, 16mm, 12mm, |
| 3/8 (0.39). 5/16 (0.31), 1/4 (0.25) | 10mm, 7.9mm, 6.35mm | ||
| OYI-T02 | Carbon Steel | 3/4 (0.75), 5/8 (0.63), 1/2 (0.5), | 19mm, 16mm, 12mm, |
| 3/8 (0.39). 5/16 (0.31), 1/4 (0.25) | 10mm, 7.9mm, 6.35mm | ||
Instructions
1. Cut a length of stainless steel cable tie according to the actual use, put the buckle to one end of the cable tie and reserve a length of about 5cm.
2. Bend the reserved cable tie to fix the stainless steel buckle
3. Put the another end of the stainless steel cable tie as picture shows, and set aside10cm for the tool to use when tightening the cable tie.
4. Tie the straps with the strap presser and start to shake the straps slowly to tighten the straps to ensure that the straps are tight.
5. When the cable tie is tightened, fold thewhole of the tight belt back, and then pull the handle of the tight belt blade to cut off the cable tie.
6. Hammer the two corners of the bucklewith a hammer to catch the last reservedtie head.
Packaging Information
Quantity: 10pcs/Outer box.
Carton Size: 42*22*22cm.
N.Weight: 19kg/Outer Carton.
G.Weight: 20kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging (OYI-T01)
Inner Packaging (OYI-T02)
-
SFP-ETRx-4
The ER4 is a transceiver module designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically demultiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.
-
Loose Tube Corrugated Steel/Aluminum Tape Flame...
The fibers are positioned in a loose tube made of PBT. The tube is filled with a water-resistant filling compound, and a steel wire or FRP is located in the center of the core as a metallic strength member. The tubes (and the fillers) are stranded around the strength member into a compact and circular core. The PSP is longitudinally applied over the cable core, which is filled with filling compound to protect it from water ingress. Finally, the cable is completed with a PE (LSZH) sheath to provide additional protection.
-
3213GER
ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, ONU is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON Realtek chip set and has high reliability， easy management，flexible configuration，robustness，good quality service guarantee(Qos).
-
OYI-ATB02A Desktop Box
OYI-ATB02A 86 double-port desktop box is developed and produced by the company itself. The product’s performance meets the requirements of industry standards YD/T2150-2010. It is suitable for installing multiple types of modules and can be applied to the work area wiring subsystem to achieve dual-core fiber access and port output. It provides fiber fixing, stripping, splicing, and protection devices, and allows for a small amount of redundant fiber inventory, making it suitable for FTTD (fiber to the desktop) system applications. The box is made of high-quality ABS plastic through injection molding, making it anti-collision, flame retardant, and highly impact-resistant. It has good sealing and anti-aging properties, protecting the cable exit and serving as a screen. It can be installed on the wall.
-
Dead end Guy Grip
Dead-end preformed is widely used for the installation of bare conductors or overhead insulated conductors for transmission and distribution lines. The reliability and economic performance of the product are better than the bolt type and hydraulic type tension clamp that are widely used in the current circuit. This unique, one-piece dead-end is neat in appearance and free from bolts or high-stress holding devices. It can be made of galvanized steel or aluminum clad steel.
-
OYI-FOSC HO7
The OYI-FOSC-02H horizontal fiber optic splice closure has two connection options: direct connection and splitting connection. It is applicable in situations such as overhead, man-well of pipeline, and embedded situations, among others. Comparing with a terminal box, the closure requires much stricter sealing requirements. Optical splice closures are used to distribute, splice, and store outdoor optical cables that enter and exit from the ends of the closure.
The closure has 2 entrance ports. The shell of the product is made from ABS+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
