0755-23179541 
sales@oyii.net
OYI-FATC-04M Series Type
Fiber Access Terminal Closure
OYI-FATC-04M Series Type
Product Features
Water-proof design with IP68 protection level.
Integrated with flap-up splice cassette and adaptor holder.
Impact test: IK10, Pull Force: 100N, Full rugged design.
All stainless metal plate and anti-rusting bolts, nuts.
Fiber bend radius control of more than 40mm.
Suitable for fusion splice or mechanical splice
1*8 Splitter can be installed as an option.
Mechanical sealing structure and mid-span cable entry.
16/24 ports cable entrance for drop cable.
24 adapters for drop cable patching.
High density capacity, maximum 288 cable splicing.
Technical Specifications
|
Item No. |
OYI-FATC-04M-1 |
OYI-FATC-04M-2 |
OYI-FATC-04M-3 |
OYI-FATC-04M-4 |
|
Size (mm) |
385*245*130 |
385*245*130 |
385*245*130 |
385*245*155 |
|
Weight (kg) |
4.5 |
4.5 |
4.5 |
4.8 |
|
Cable Entrance Diameter (mm) |
φ 8~16.5 |
φ 8~16.5 |
φ 8~16.5 |
φ 10~16.5 |
|
Cable Ports |
1*Oval,2*Round |
1*Oval |
1*Oval,6*Round |
1*Oval,2*Round |
|
Max Capacity Of Fiber |
96 |
96 |
288 |
144 |
|
Max Capacity Of Splice Tray |
4 |
4 |
12 |
6 |
|
PLC Splitters |
2*1:8 mini Steel Tube Type |
3*1:8 mini Steel Tube Type |
3*1:8 mini Steel Tube Type |
2*1:8 mini Steel Tube Type |
|
Adaptors |
24 SC |
24 SC |
24 SC |
16 SC |
Applications
Wall mounting and pole mounting installation.
FTTH pre installation and field installation.
4-7mm cable ports suitable for 2x3mm indoor FTTH drop cable and outdoor figure 8 FTTH self-supporting drop cable.
Packaging Information
Quantity: 4pcs/Outer box.
Carton Size: 52*43.5*37cm.
N.Weight: 18.2kg/Outer Carton.
G.Weight: 19.2kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Box
Outer Carton
-
OYI-IW series
Indoor Wall-mount Fiber Optic Distribution Frame can manage both single fiber and ribbon & bundle fiber cables for indoor using. It is an integrated unit for fiber management, and can be used as distribution box， this equipment function is to fix and manage the fiber optic cables inside the box as well as provide protection. Fiber optic termination box is modular so they are applying cable to your existing systems without any modification or additional work. Suitable for installation of FC, SC, ST, LC, etc. adaptors, and suitable for fiber optic pigtail or plastic box type PLC splitters. and large working space to integrate the pigtails, cables and adapters.
-
Anchoring Clamp PA1500
The anchoring cable clamp is a high-quality and durable product. It consists of two parts: a stainless steel wire and a reinforced nylon body made of plastic. The body of the clamp is made of UV plastic, which is friendly and safe to use even in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 8-12mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly.
FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests.
-
Micro Fiber Indoor Cable GJYPFV(GJYPFH)
The structure of indoor optical FTTH cable is as follows: in the center is the optical communication unit.Two parallel Fiber Reinforced (FRP/Steel wire) are placed on the two sides. Then, the cable is completed with a black or colored Lsoh Low Smoke Zero Halogen (LSZH/PVC) sheath.
-
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.
-
J Clamp J-Hook Small Type Suspension Clamp
OYI anchoring suspension clamp J hook is durable and of good quality, making it a worthwhile choice. It plays an important role in many industrial settings. The main material of the OYI anchoring suspension clamp is carbon steel, and the surface is electro galvanized, allowing it to last for a long period without rusting as a pole accessory. The J hook suspension clamp can be used with the OYI series stainless steel bands and buckles to fix cables onto poles, playing different roles in different places. Different cable sizes are available.
The OYI anchoring suspension clamp can be used to link signs and cable installations on posts. It is electro galvanized and can be used outside for more than 10 years without rusting. There are no sharp edges, and the corners are rounded. All items are clean, rust free, smooth, and uniform throughout, and free from burrs. It plays a huge role in industrial production.
-
OYI-FOSC-M20
The OYI-FOSC-M20 dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
