0755-23179541 
sales@oyii.net.png)
8618926041961
Tension Clamp – PA500
Hardware Products
Tension Clamp - PA500
Product Features
1. Good anti-corrosion performance.
2. Abrasion and wear resistant.
3. Maintenance-free.
4. Durable.
5. Easy installation.
6. Strong grip to prevent the cable from slipping.
7. Stainless Steel Wire has guaranteed firm tensile force.
Specifications
|
Model |
Size |
Material |
Apply Cable diameter |
Weight |
Breaking load |
Warranty Time |
|
PA500 |
330*62*32 mm |
PA6+SS |
3-9 mm |
133 g |
3 KN |
10 year |
Dimension
Product Pictures
Packaging Information
Quantity: 100pcs/Outer box.
1. Carton Size: 38*30*30cm.
2. N.Weight: 13kg/Outer Carton.
3. G.Weight: 14 kg/Outer Carton.
4. OEM service available for mass quantity, can print logo on cartons.
Inner Box
Outer Carton
-
Flat Twin Fiber Cable GJFJBV
The flat twin cable uses 600μm or 900μm tight buffered fiber as the optical communication medium. The tight buffered fiber is wrapped with a layer of aramid yarn as a strength member. Such a unit is extruded with a layer as an inner sheath. The cable is completed with an outer sheath.(PVC, OFNP, or LSZH) -
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access. -
1.25Gbps 1550nm 60Km LC DDM
The SFP transceivers are high-performance, cost-effective modules supporting data rate of 1.25Gbps and 60km transmission distance with SMF. The transceiver consists of three sections: a SFP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions. -
8 Cores Type OYI-FAT08G Terminal Box
The 8-core OYI-FAT08G optical terminal box mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The OYI-FAT08G optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optic lines are very clear, making it convenient to operate and maintain. It can also accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with a capacity of 1*8 mini PLC splitter to accommodate the expansion of the box’s usage. -
FTTH Drop Cable Suspension Tension Clamp S Hook...
FTTH fiber optic drop cable suspension tension clamp S hook clamps are also called insulated plastic drop wire clamps. The design of the dead-ending and suspension thermoplastic drop clamp includes a closed conical body shape and a flat wedge. It is connected to the body through a flexible link, ensuring its captivity and an opening bail. It is a kind of drop cable clamp that is widely used for both indoor and outdoor installations. It is provided with a serrated shim to increase hold on the drop wire and used to support one and two pair telephone drop wires at span clamps, drive hooks, and various drop attachments. The prominent advantage of the insulated drop wire clamp is that it can prevent electrical surges from reaching the customer premises. The working load on the support wire is effectively reduced by the insulated drop wire clamp. It is characterized by good corrosion resistant performance, good insulating properties, and long life service. OYI offers this tension clamp with appropriate fish type, S-type, and other FTTH clamps. All the assemblies have passed the tensile tests and operation experience with temperatures ranging from -60°C up to +60°C tests. -
Fanout Multi-core (4~48F) 2.0mm Connectors Patc...
OYI fiber optic fanout patch cord, also known as a fiber optic jumper, is composed of a fiber optic cable terminated with different connectors on each end. Fiber optic patch cables are used in two major application areas: computer workstations to outlets and patch panels or optical cross-connect distribution centers. OYI provides various types of fiber optic patch cables, including single-mode, multi-mode, multi-core, armored patch cables, as well as fiber optic pigtails and other special patch cables. For most patch cables, connectors such as SC, ST, FC, LC, MU, MTRJ, and E2000 (APC/UPC polish) are all available.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
