0755-23179541 
sales@oyii.net
OYI-FOSC-D109M
Heat Shrink Type Dome Closure
OYI-FOSC-D109M
Product Features
1. High-quality PC, ABS, and PPR materials are optional, which can ensure harsh conditions such as vibration and impact.
2. Structural parts are made of high-quality stainless steel, providing high strength and corrosion resistance, making them suitable for various environments.
3. The structure is strong and reasonable, with a heat shrinkable sealing structure that can be opened and reused after sealing.
4. It is well water and dust-proof, with a unique grounding device to ensure sealing performance and convenient installation.The protection grade reaches IP68.
5. The splice closure has a wide application range, with good sealing performance and easy installation. It is produced with high-strength engineering plastic housing that is anti-aging, corrosion-resistant, high-temperature resistant, and has high mechanical strength.
6. The box has multiple reuse and expansion functions, allowing it to accommodate various core cables.
7. The splice trays inside the closure are turn-able like booklets and have adequate curvature radius and space for winding optical fiber, ensuring a curvature radius of 40mm for optical winding.
8. Each optical cable and fiber can be operated individually.
9. Using mechanical sealing , reliable sealing, convenient operation.
10. The closure is of small volume, big capacity, and convenient maintenance. The elastic rubber seal rings inside the closure have good sealing and sweat-proof performance. The casing can be opened repeatedly without any air leakage. No special tools are required. The operation is easy and simple. An air valve is provided for the closure and is used to check the sealing performance
Specifications
|
Item No. |
OYI-FOSC-D109M |
|
|
|
|
Size (mm) |
Φ305*530 |
|
Weight (kg) |
4.25 |
|
Cable Diameter(mm) |
Φ7~Φ21 |
|
Cable Ports |
2 in, 8 out |
|
Max Capacity Of Fiber |
288 |
|
Max Capacity Of Splice |
24 |
|
Max Capacity Of Splice Tray |
12 |
|
Cable Entry Sealing |
Mechanical Sealing By Silicon Rubber |
|
Sealing Structure |
Silicon Rubber Material |
|
Life Span |
More Than 25 Years |
Applications
1.Telecommunications, railway, fiber repair, CATV, CCTV, LAN, FTTX.
2.Using communication cable lines overhead, underground, direct-buried, and so on.
Standard Accessories
Tag paper: 1pc
Sand paper: 1pc
Spanner: 2pcs
Sealing rubber strip: 1pc
Insulating tape: 1pc
Cleaning tissue: 1pc
Plastic plug+Rubber plug: 16pcs
Cable tie:3mm*10mm: 12pcs
Fiber protective tube: 4pcs
Heat-shrink sleeve: 1.0mm*3mm*60mm 12-288pcs
Optional Accessories
Pole mounting（A）
Pole mounting（B）
Pole mounting（C）
Wall mounting
Aerial mounting
Packaging Information
1.Quantity: 4pcs/Outer box.
2.Carton Size: 60*47*50cm.
3.N.Weight: 17kg/Outer Carton.
4.G.Weight: 18kg/Outer Carton.
5.OEM service available for mass quantity, can print logo on cartons.
Inner Box
Outer Carton
-
Drop Wire Clamp B& C Type
Polyamide clamp is a type of plastic cable clamp, Product use high-quality UV resistant thermoplastic processed by injection molding technology, which is widely used to support Telephone cable or butterfly introduction fiber optical cable at span clamps, drive hooks and various drop attachments. Polyamide clamp consists of three parts: a shell, a shim and a wedge equipped. The working load on the support wire is effectively reduced by the insulated drop wire clamp. It’s characterized by good corrosion resistant performance, good insulating property, and long-life service.
-
OYI-FATC 16A Terminal Box
The 16-core OYI-FATC 16A optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
The OYI-FATC 16A optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 4 cable holes under the box that can accommodate 4 outdoor optical cables for direct or different junctions,and it can also accommodate 16 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 72 cores capacity specifications to accommodate the box’s expansion needs.
-
OYI-FOSC-D111
OYI-FOSC-D111 is an oval dome type fiber optic splice closure that support fiber splicing and protection. It is waterproof and dust proof and suitable for outdoor aerial hanged, pole mounted, wall mounted, duct or buried application.
-
Anchoring Clamp PA1500
The anchoring cable clamp is a high-quality and durable product. It consists of two parts: a stainless steel wire and a reinforced nylon body made of plastic. The body of the clamp is made of UV plastic, which is friendly and safe to use even in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 8-12mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly.
FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests.
-
OYI-ATB04A Desktop Box
OYI-ATB04A 4-port desktop box is developed and produced by the company itself. The product’s performance meets the requirements of industry standards YD/T2150-2010. It is suitable for installing multiple types of modules and can be applied to the work area wiring subsystem to achieve dual-core fiber access and port output. It provides fiber fixing, stripping, splicing, and protection devices, and allows for a small amount of redundant fiber inventory, making it suitable for FTTD (fiber to the desktop) system applications. The box is made of high-quality ABS plastic through injection molding, making it anti-collision, flame retardant, and highly impact-resistant. It has good sealing and anti-aging properties, protecting the cable exit and serving as a screen. It can be installed on the wall.
-
OYI-FAT16J-A Series Terminal Box
The 16-core OYI-FAT16J-A optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
The OYI-FAT16J-A optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 4 cable holes under the box that can accommodate 4 outdoor optical cables for direct or different junctions, and it can also accommodate 16 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 16 cores capacity specifications to accommodate the box’s expansion needs.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
