0755-23179541 
sales@oyii.net
OYI-ODF-FR-Series Type
Optic Fiber Terminal/Distribution Panel
OYI-ODF-FR-Series Type
Product Features
19" standard size, easy to install.
Lightweight, strong, good at resisting shocks and dust.
Well-managed cables, making it easy to distinguish between them.
Spacious interior ensures a proper fiber bending ratio.
All types of pigtails available for installation.
Made of cold-rolled steel sheet with strong adhesive force, featuring an artistic design and durability.
Cable entrances are sealed with oil-resistant NBR to increase flexibility. Users can choose to pierce the entrance and exit.
Comprehensive accessory kit for cable entry and fiber management.
Patch cord bend radius guides minimize macro bending.
Available as a full assembly (loaded) or empty panel.
Different adapter interfaces including ST, SC, FC, LC, E2000.
Splice capability is up to a maximum of 48 fibers with splice trays loaded.
Fully compliant with the YD/T925—1997 quality management system.
Specifications
|
Mode Type |
Size (mm) |
Max Capacity |
Outer Carton Size (mm) |
Gross Weight (kg) |
Quantity In Carton Pcs |
|
OYI-ODF-FR-1U |
482*250*1U |
24 |
540*330*285 |
14.5 |
5 |
|
OYI-ODF-FR-2U |
482*250*2U |
48 |
540*330*520 |
19 |
5 |
|
OYI-ODF-FR-3U |
482*250*3U |
96 |
540*345*625 |
21 |
4 |
|
OYI-ODF-FR-4U |
482*250*4U |
144 |
540*345*420 |
13 |
2 |
Applications
Data communications networks.
Storage area network.
Fiber channel.
FTTx system wide area network.
Test instruments.
CATV networks.
Widely used in FTTH access network.
Operations
Peel the cable, remove the outer and inner housing, as well as any loose tube, and wash off the filling gel, leaving 1.1 to 1.6m of fiber and 20 to 40mm of steel core.
Attach the cable-pressing card to the cable, as well as the cable reinforce steel core.
Guide the fiber into the splicing and connecting tray, secure the heat-shrink tube and splicing tube to one of the connecting fibers. After splicing and connecting the fiber, move the heat-shrink tube and splicing tube and secure the stainless (or quartz) reinforce core member, ensuring that the connecting point is in the middle of the housing pipe. Heat the pipe to fuse the two together. Place the protected joint into the fiber-splicing tray. (One tray can accommodate 12-24 cores)
Lay the remaining fiber evenly in the splicing and connecting tray, and secure the winding fiber with nylon ties. Use the trays from the bottom up. Once all the fibers have been connected, cover the top layer and secure it.
Position it and use the earth wire according to the project plan.
Packing List:
(1) Terminal case main body: 1 piece
(2) Polishing sand paper: 1 piece
(3) Splicing and connecting mark: 1 piece
(4) Heat shrinkable sleeve: 2 to 144 pieces, tie: 4 to 24 pieces
Packaging Information
Inner Packaging
Outer Carton
-
Anchoring Clamp PA1500
The anchoring cable clamp is a high-quality and durable product. It consists of two parts: a stainless steel wire and a reinforced nylon body made of plastic. The body of the clamp is made of UV plastic, which is friendly and safe to use even in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 8-12mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly.
FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests.
-
ADSS Suspension Clamp Type B
The ADSS suspension unit is made of high tensile galvanized steel wire materials, which have higher corrosion resistance capability, thus extending the lifetime usage. The gentle rubber clamp pieces improve self-damping and reduce abrasion.
-
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.
-
OYI-ODF-MPO RS288
OYI-ODF-MPO RS 288 2U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 2U height for 19 inch rack mounted application. It has 6pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 24pcs MPO cassettes HD-08 for max. 288 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel.
-
Optic Fiber Terminal Box
Design of hinge and convenient press-pull button lock.
-
J Clamp J-Hook Big Type Suspension Clamp
OYI anchoring suspension clamp J hook is durable and of good quality, making it a worthwhile choice. It plays an important role in many industrial settings. The main material of the OYI anchoring suspension clamp is carbon steel, with an electro galvanized surface that prevents rust and ensures a long lifespan for pole accessories. The J hook suspension clamp can be used with the OYI series stainless steel bands and buckles to fix cables onto poles, playing different roles in different places. Different cable sizes are available.
The OYI anchoring suspension clamp can also be used to link signs and cable installations on posts. It is electro galvanized and can be used outdoors for over 10 years without rusting. It has no sharp edges, with rounded corners, and all items are clean, rust free, smooth, and uniform throughout, free from burrs. It plays a huge role in industrial production.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.