0755-23179541 
sales@oyii.net.png)
8618926041961
3213GER
XPON ON
3213GER
Product Features
1. comply fully with ITU-G.984.1/2/3/4 standard and G.987.3 protocol.
2. support downlink 2.488 Gbits/s rate and uplink 1.244 Gbits/s rate.
3. support bidirectional FEC and RS (255,239) FEC CODEC.
4. support 32 TCONT and 256 GEMPORT.
5. support AES128 decryption function of G.984 standard.
6. support SBA and DBA dynamically broadband allocation.
7. support the PLOAM function of G.984 standard.
8. support Dying-Gasp check and report.
9. support synchronous Ethernet.
10. good interworking with the OLT from different manufacturers，such as huawei, Realtek, Cortina etc.
11. down-link LAN ports:1*10/100M with auto-negotiation 1*10/100/1000M with auto-negotiation.
12. support the rogue ONU alarm function.
13. Support VLAN function.
14. operation mode: SFU or HGU option.
15. support IEEE802.11b/g/n standard for WIFI.
16. double antennas: external box with 5DBi.
17. support of 300Mbps PHY rate.
18. support multiply SSID.
19. Multiple encryption methods :WFA、WPA、WPA2、WAPI.
20. one port for VOIP，support H.248 、SIP protocol optional.
Specifications
|
Tech parameters |
Description |
|
|
1 |
Up-link interface |
1 XPON interface，SC single mode single fiber RX 2.488 Gbits/s rate and TX 1.244 Gbits/s rate Fiber type：SC/APC Optical power：0~4 dBm Sensitivity：-28 dBm safety: ONU authentication mechanism |
|
2 |
Wavelength(nm) |
TX 1310nm，RX 1490nm |
|
3 |
Fiber connector |
SC/APC connector |
|
4 |
Down-link data interface |
1*10/100Mbps and 1*10/100/1000M auto-negotiation Ethernet interface, RJ45 interface |
|
5 |
Indicator LED |
7 pcs，refer to NO.6 definition of indicator LED |
|
6 |
DC supply interface |
input＋12V 1A，footprint：DC0005 ø2.1MM |
|
7 |
Power |
≤5W |
|
8 |
Operating temperature |
-5～+55℃ |
|
9 |
Humidity |
10～85%（non-condensation） |
|
10 |
Storage temperature |
-30～+70℃ |
|
11 |
Dimension（MM） |
155*92*32mm（mainframe） |
|
12 |
Weight |
0.38Kg（mainframe） |
1.WIFI Characteristics
|
|
Tech features |
Description |
|
1 |
Antenna |
2T2R Mode 5DBI Gain, Frequency:2.4G |
|
2 |
Rate |
WIFI4 wireless speed of 300Mbps, with 13 channels; |
|
3 |
Encryption methods |
WFA、WPA、WPA2、WAPI |
|
4 |
Transmission power |
WiFi4 17dBm； |
|
5 |
Receiving sensitivity |
WiFi4-59dBm @ channel 11, MCS7 |
|
6 |
WPS feature |
support |
2.VOIP Tech Features
|
Tech features |
Description |
|
|
1 |
Voltage and Current Monitoring |
The continuously monitors the TIP, RING, and battery voltages and currents via an on-chip Monitor ADC |
|
2 |
Power Monitoring and Power Fault Detection |
The monitoring functions are used to continuously protect against excessive power conditions |
|
3 |
Thermal Overload Shutdown |
If the die temperature exceeds the maximum junction temperature threshold, the device will shut itself down |
|
4 |
Default configuration |
Voice protocol: SIP; Media stream encoding: G722, G729, G711A, G711U, fax: disabled; |
|
Voice protocol: SIP; Media stream encoding: G722, G729, G711A, G711U, fax: disabled; |
|
Voice protocol: SIP; Media stream encoding: G722, G729, G711A, G711U, fax: disabled; |
Installation and Initialization
1.Insert SC/APC fiber patch cord or pigtail into PON interface of the product.
2.Use the network untwised-pair from network equipment to the Lan Interface of product, the LAN interface of this product supports the AUTO-MDIX function.
3.Offer product power, please use the DC plug of adapter to connect with the DC socket of the product, and the AC plug of the power adapter should be plugged into the AC socket.
4.The power will be connected successfully if the PWR indicator ON, the system will be into initial stage, and then, to wait for the completion of system initialization.
Definition of indicator LED
|
Symbol |
Color |
Meaning |
|
PWR |
Green |
ON: successfully connect with power OFF: fail to connect with power |
|
PON |
Green |
ON: ONU port link correctly Flicker: PON registering OFF: ONU ports link link faulty |
|
LAN |
Green |
ON: Link up correctly Flicker: data is transmitting OFF: link down faulty |
|
POTS |
Green |
ON: Register success OFF: Register fail |
|
WIFI |
Green |
ON: WIFI is running OFF: WIFI startup fail |
|
LOS |
Red |
Flicker: fail to connect with PON port OFF: detected fiber to input |
Packing list
|
Name |
Quantity |
Unit |
|
XPON ONU |
1 |
pcs |
|
Supply Power |
1 |
pcs |
|
Manual & Warranty Card |
1 |
pcs |
Order information ONU Weight
|
Product Model |
Function and LAN |
LAN Ports |
Type of Fiber |
Default Mode |
|
323GER |
1GE+1FE 2.4 G WIFI 1VOIP |
2LAN，1GE +1FE RJ45 |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
321GER |
1GE+1FE 2.4 G WIFI |
2LAN，1GE +1FE RJ45 |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
3213GER |
1GE+1FE 2.4 G WIFI 1 VOIP |
2LAN，1GE +1FE RJ45 |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
3212GDER
|
1GE+1FE 2.4 G WIFI1 WDM CATV |
2LAN, 1GE +1FE RJ45
|
1 UP LINK XPON, BOSA UPCIAPC |
HGU |
|
32123GDER |
1GE+1FE2.4 G WIF!1 VOIP 1 WDM CATV |
2LAN, 1GE +1FE RJ45 |
1 UP LINK XPON, B OSA UPCIAPC |
HGU |
ONU Weight
|
Product Form |
Product Model |
Weight (kg) |
Bare Weight （kg) |
Dimension |
Carton |
Product Description |
|||
|
Product: （mm） |
Package： (mm) |
Carton size:(cm) |
Number |
Weight (kg) |
|||||
|
2 Ports ONU |
323GER |
0.3 |
0.15 |
108*85*25 |
146*117*66 |
45.9*42*34.2 |
40 |
13.6 |
1GE 1FE VOIP |
|
2 Ports ONU |
321GER |
0.38 |
0.18 |
155*92*32 |
220*160*38 |
49.5*48*37.5 |
50 |
20.3 |
1GE 1FE WIFI |
|
2 Ports ONU |
3213GER |
0.38 |
0.18 |
155*92*32 |
220*160*38 |
49.5*48*37.5 |
50 |
20.3 |
1GE 1FE WIFI, VOIP |
|
2 Ports ONU |
3212GDER |
0.38 |
0.18 |
155*92*32 |
220*160*38 |
49.5*48*37.5 |
50 |
20.3 |
1GE 1FE WIFI, CATV |
|
2 Ports ONU |
32123GDER |
0.38 |
0.18 |
155*92*32 |
220*160*38 |
49.5*48*37.5 |
50 |
20.3 |
1GE 1FE WIFI, VOIP, CATV |
-
Fiber Optic Cleaner Pen 1.25mm Type
Universal One-Click Fiber Optic Cleaner Pen for 1.25mm LC/MU Connectors (800 cleans) The one-click fiber optic cleaner pen is easy to use and can be used to clean LC/MU connectors and exposed 1.25mm collars in the fiber optic cable adapter. Simply insert the cleaner into the adapter and push it until you hear a “click”. The push cleaner uses a mechanical push operation to push the optical grade cleaning tape while rotating the cleaning head to ensure that the fiber end surface is effective but gentle clean. -
Male to Female Type FC Attenuator
OYI FC male-female attenuator plug type fixed attenuator family offers high performance of various fixed attenuation for industrial standard connections. It has a wide attenuation range, extremely low return loss, is polarization insensitive, and has excellent repeatability. With our highly integrated design and manufacturing capability, the attenuation of male-female type SC attenuator can also be customized to help our customers find better opportunities. Our attenuator complies with industry green initiatives, such as ROHS. -
Direct Bury (DB) 7-way 16/12mm
A bundle of micro/mini-tubes with strengthened walls is encapsulated in a single thin HDPE sheath, enabling seamless retrofitting into existing duct infrastructures for cost-efficient fiber optical cable deployment. Optimized for high-performance air-blowing, the micro ducts feature low-friction inner surfaces that accelerate fiber optical cable installation—critical for FTTH networks, 5G backhaul systems, and metro access networks. Color-coded per Figure 1, the ducts support organized routing of multi-service fibers (e.g., DCI, smart grid), enhancing network scalability and maintenance efficiency in next-gen optical infrastructures. -
OYI-FATC-04M Series Type
The OYI-FATC-04M Series are used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable,and it is able to hold up to 16-24 subscribers ,Max Capacity 288cores splicing points as closure.They are used as a splicing closure and a termination point for the feeder cable to connect with drop cable in FTTX network system. They integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box. The closure has 2/4/8type entrance ports on the end. The shell of the product is made from PP+ABS material. The shell and the base are sealed by pressing the silicone rubber with the allocated clamp. The entry ports are sealed by mechanical sealing. The closures can be opened again after being sealed and reused without changing the sealing material. The closure’s main construction includes the box, splicing, and it can be configured with adapters and optical splitters. -
ADSS Suspension Clamp Type B
The ADSS suspension unit is made of high tensile galvanized steel wire materials, which have higher corrosion resistance capability, thus extending the lifetime usage. The gentle rubber clamp pieces improve self-damping and reduce abrasion. -
OYI-FOSC-D102M
The optical splice closures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. There are two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man- well of pipeline, embedded situation etc. Comparing with terminal box, the closure requires much stricter requirement of seal. Sealing ring and air valve are required for closure, but that are not necessary for terminal box.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
