0755-23179541 
sales@oyii.net
OYI-ODF-MPO RS144
High Density Fiber Optic Patch Panel
OYI-ODF-MPO RS144
Product Features
1.Standard 1U height, 19-inch rack mounted, suitable for cabinet, rack installation.
2.Made by high strength cold roll steel.
3.Electrostatic power spraying can pass 48 hours salt spray test.
4.Mounting hanger can be adjusted forward and backward.
5.With sliding rails, smooth sliding design, convenient for operating.
6.With cable management plate at rear side, reliable for optical cable management.
7.Light weight, strong strength, good anti-shocking and dustproof.
Applications
1.Data communications networks.
2.Storage area network.
3.Fiber channel.
4.FTTx system wide area network.
5.Test instruments.
6.CATV networks.
7.Widely used in FTTH access network.
Drawings (mm)
Instruction
2. Cable fixing hole and cable tie
3. MPO adapter
4. MPO cassette OYI-HD-08
6. LC or SC patch cord
Accessories
|
Item |
Name |
Specification |
Qty |
|
1 |
Mounting hanger |
67*19.5*44.3mm |
2pcs |
|
2 |
Countersunk head screw |
M3*6/metal/Black zinc |
12pcs |
|
3 |
Nylon cable tie |
3mm*120mm/white |
12pcs |
Packaging Information
|
Carton |
Size |
Net weight |
Gross weight |
Packing qty |
Remark |
|
Inner carton |
48x41x6.5cm |
4.2kgs |
4.6kgs |
1pc |
Inner carton 0.4kgs |
|
Master carton |
50x43x36cm |
23kgs |
24.3kgs |
5pcs |
Master carton 1.3kgs |
Note: Above weight is not included the MPO cassette OYI HD-08. Each OYI-HD-08 is 0.0542kgs.
Inner Box
Outer Carton
-
Central Loose Tube Non-metallic & Non-armo...
The structure of the GYFXTY optical cable is such that a 250μm optical fiber is enclosed in a loose tube made of high modulus material. The loose tube is filled with waterproof compound and water-blocking material is added to ensure longitudinal water-blocking of the cable. Two glass fiber reinforced plastics (FRP) are placed on both sides, and finally, the cable is covered with a polyethylene (PE) sheath through extrusion.
-
OYI-OCC-C Type
Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross-connection cabinets will be widely deployed and move closer to the end user.
-
OYI-FAT16J-B Series Terminal Box
The 16-core OYI-FAT16J-B optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
The OYI-FAT16J-B optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 4 cable holes under the box that can accommodate 4 outdoor optical cables for direct or different junctions, and it can also accommodate 16 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 16 cores capacity specifications to accommodate the box’s expansion needs.
-
OYI-FOSC-H5
The OYI-FOSC-H5 dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
-
Loose Tube Armored Flame-retardant Direct Burie...
The fibers are positioned in a loose tube made of PBT. The tubes are filled with a water-resistant filling compound. A steel wire or FRP is located in the center of the core as a metallic strength member. The tubes and the fillers are stranded around the strength member into a compact and circular core. An Aluminum Polyethylene Laminate (APL) or steel tape is applied around the cable core, which is filled with filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE (LSZH) outer sheath.(WITH DOUBLE SHEATHS)
-
Direct Bury (DB) 7-way 16/12mm
A bundle of micro/mini-tubes with strengthened walls is encapsulated in a single thin HDPE sheath, enabling seamless retrofitting into existing duct infrastructures for cost-efficient fiber optical cable deployment. Optimized for high-performance air-blowing, the micro ducts feature low-friction inner surfaces that accelerate fiber optical cable installation—critical for FTTH networks, 5G backhaul systems, and metro access networks. Color-coded per Figure 1, the ducts support organized routing of multi-service fibers (e.g., DCI, smart grid), enhancing network scalability and maintenance efficiency in next-gen optical infrastructures.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
