0755-23179541 
sales@oyii.net.png)
8618926041961
10&100&1000M Media Converter
10&100&1000M Media Converter
10&100&1000M Media Converter
Product Description
10/100/1000M adaptive fast Ethernet optical Media Converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100 Base-TX/1000 Base-FX and 1000 Base-FX network segments, meeting long-distance, high - speed and high-broadband fast Ethernet workgroup users’ needs, achieving high-speed remote interconnection for up to 100 km's relay-free computer data network. With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks.
Product Features
1. In accordance with Ethernet standards IEEE802.3,10/100Base-TX/1000Base-TX and 1000Base-FX.
2. Supported Ports: LC for optical fiber; RJ45 for twisted pair.
3. Auto-adaptation rate and full/half-duplex mode supported at twisted pair port.
4. Auto MDI/MDIX supported without need of cable selection.
5. Up to 6 LEDs for status indication of optical power port and UTP port.
6. External and built-in DC power supplies provided.
7. Up to 1024 MAC addresses supported.
8. 512 kb data storage integrated, and 802.1X original MAC address authentication supported.
9. Conflicting frames detection in half-duplex and flow control in full duplex supported.
Technical Specifications
|
Technical Parameters for 10/100/1000M Adaptive Fast Ethernet Optical Media Converter |
||
|
Number of Network Ports |
1 channel |
|
|
Number of Optical Ports |
1 channel |
|
|
NIC Transmission Rate |
10/100/1000Mbit/s |
|
|
NIC Transmission Mode |
10/100/1000M adaptive with support for automatic inversion of MDI/MDIX |
|
|
Optical Port Transmission Rate |
1000Mbit/s |
|
|
Operating Voltage |
AC 220V or DC +5V |
|
|
Over all Power |
<3W |
|
|
Network Ports |
RJ45 port |
|
|
Optical Specifications |
Optical Port: SC, LC (Optional) Multi-Mode: 50/125, 62.5/125um Single-Mode: 8.3/125, 8.7/125um, 8/125,10/125um Wavelength: Single-Mode: 1310/1550nm |
|
|
Data Channel |
IEEE802.3x and collision base backpressure supported Working Mode: Full/half duplex supported Transmission Rate: 1000Mbit/s with error rate of zero |
|
Product Pictures
Operating Environment
1.Operating Voltage
AC 220V/ DC +5V
2.Operating Humidity
2.1 Operating Temperature: 0℃ to +60℃
2.2 Storage Temperature: -20℃ to +70℃ Humidity: 5% to 90%
3.Quality Assurance
3.1 MTBF > 100,000 hours;
3.2 Replacement within one year and non-charge repair within three years guaranteed.
4.Application Fields
4.1 For intranet prepared for expansion from 100M to 1000M.
4.2 For integrated data network for multimedia such as image, voice and etc.
4.3 For point-to-point computer data transmission.
4.5 For computer data transmission network in a wide range of business application.
4.6 For broadband campus network, cable TV and intelligent FTTB/FTTH data tape.
4.7 In combination with switchboard or other computer network facilitates for: chain-type, star-type and ring-type network and other computer networks.
Remarks and Notes
Instructions on Media Converter Panel
Identification for front panel of the media converter is shown below:
1.Identification of Media Converter TX - transmitting terminal; RX - receiving terminal;
2.PWR Power Indicator Light – “ON” means normal operation of DC 5V power supply adaptor.
3.1000M Indicator Light “ON” means the rate of the electric port is 1000 Mbps, while “OFF” means the rate is 100 Mbps.
4.LINK/ACT (FP) “ON” means connectivity of the optical channel; “FLASH” means data transfer in the channel; “OFF” means non-connectivity of the optical channel.
5.LINK/ACT (TP) “ON” means connectivity of the electric circuit; “FLASH” means data transfer in the circuit; “OFF” means non-connectivity of the electric circuit.
6.SD Indicator Light “ON” means input of optical signal; “OFF” means non input.
7.FDX/COL: “ON” means full duplex electric port; “OFF” means half-duplex electric port.
8.UTP Non shielded twisted pair port; Instructions on Rear Panel Mounting Dimensions Sketch.
Mounting Dimensions Sketch
Ordering information
|
OYI-8110G-SFP |
1 GE SFP slot + 1 1000M RJ45 port |
0~70°C |
|
OYI-8110G-SFP-AS |
1 GE SFP slot + 1 10/100/1000M RJ45 port |
0~70°C |
-
OYI J Type Fast Connector
Our fiber optic fast connector, the OYI J type, is designed for FTTH (Fiber to The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly that provides open flow and precast types, meeting the optical and mechanical specifications of standard optical fiber connectors. It is designed for high quality and high efficiency during installation.Mechanical connectors make fiber terminations quick, easy, and reliable. These fiber optic connectors offer terminations without any hassle and require no epoxy, no polishing, no splicing, and no heating, achieving similar excellent transmission parameters as standard polishing and splicing technology. Our connector can greatly reduce the assembly and setup time. The pre-polished connectors are mainly applied to FTTH cables in FTTH projects, directly at the end-user site. -
OYI-OW2 series Type
Outdoor Wall-mount Fiber Optic Distribution Frame is mainly used for connecting the outdoor optical cables, optical patch cords and optical pigtails. It can be wall mounted or pole mounted, and facilitates the test and refit of the lines. It is an integrated unit for fiber management, and can be used as distribution box. This equipment function is to fix and manage the fiber optic cables inside the box as well as provide protection. Fiber optic termination box is modular so they are applying cable to your existing systems without any modification or additional work. Suitable for installation of FC, SC, ST, LC, etc. adaptors, and suitable for fiber optic pigtail or plastic box type PLC splitters and large working space to integrate the pigtails, cables and adapters. -
OYI-FOSC-H03
The OYI-FOSC-H03 Horizontal fiber optic splice closure has two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man-well of pipeline, and embedded situations, etc. Comparing with a terminal box, the closure requires much stricter requirements for sealing. Optical splice closures are used to distribute, splice, and store the outdoor optical cables that enter and exit from the ends of the closure. The closure has 3 entrance ports and 3 output ports. The shell of the product is made from ABS+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. -
OYI-DIN-07-A Series
DIN-07-A is a DIN rail mounted fiber optic terminal box that used for fiber connection and distribution. It is made of aluminum, inside splice holder for fiber fusion. -
OYI-OCC-E Type
Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross-connection cabinets will be widely deployed and move closer to the end user. -
OYI-FOSC-D108M-B PLC Type
The OYI-FOSC-D108M-B Type dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. The closure has 6 round ports entrance port on the end . The shell of the product is made from PP+ABS material. The shell and the base are sealed by pressing the silicone rubber with the allocated clamp. The entry ports are sealed by mechanical sealing. The closures can be opened again after being sealed and reused without changing the sealing material. The closure’s main construction includes the box, splicing, and it can be configured with adapters and optical splitters.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
