OYI-FOSC-H8

Fiber Optic Splice Closure Heat Shrink Type Dome Closure

OYI-FOSC-H8

The OYI-FOSC-H8 dome fiber optic splice closure is used in aerial, wall-mounting, and underground applications for the straight-through and branching splice of the fiber cable. Dome splicing closures are excellent protection of fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.


Product Detail

FAQ

Product Tags

The closure has 5 entrance ports on the end (6 round ports and 1 oval port). The shell of the product is made from PP+ABS material. The shell and the base are sealed by pressing the silicone rubber with the allocated clamp. The entry ports are sealed by heat-shrinkable tubes. The closures can be opened again after being sealed and reused without changing the sealing material.

The closure's main construction includes the box, splicing, and it can be configured with adapters and optical splitters.

Product Features

High-quality PP+ABS materials are optional, which can ensure harsh conditions such as vibration and impact.

Structural parts are made of high-quality stainless steel, providing high strength and corrosion resistance, making them suitable for various environments.

The structure is strong and reasonable, with a heat shrinkable sealing structure that can be opened and reused after sealing.

It is well water and dust-proof, with a unique grounding device to ensure sealing performance and convenient installation.The protection grade reaches IP68.

The splice closure has a wide application range, with good sealing performance and easy installation.  It is produced with high-strength engineering plastic housing that is anti-aging, corrosion-resistant, high-temperature resistant, and has high mechanical strength.

The box has multiple reuse and expansion functions, allowing it to accommodate various core cables.

The splice trays inside the closure are turn-able like booklets and have adequate curvature radius and space for winding optical fiber, ensuring a curvature radius of 40mm for optical winding.

Each optical cable and fiber can be operated individually.

Sealed silicone rubber and sealing clay are used for reliable sealing and convenient operation during the opening of the pressure seal.

The closure is of small volume, big capacity, and convenient maintenance. The elastic rubber seal rings inside the closure have good sealing and sweat-proof performance. The casing can be opened repeatedly without any air leakage. No special tools are required. The operation is easy and simple. An air valve is provided for the closure and is used to check the sealing performance.

Designed for FTTH with adapter if needed.

Technical Specifications

Item No. OYI-FOSC-H8
Size (mm) Φ220*470
Weight (kg) 2.5
Cable Diameter (mm) Φ7~Φ21
Cable Ports 1 in (40*70mm), 4 out (21mm)
Max Capacity Of Fiber 144
Max Capacity Of Splice 24
Max Capacity Of Splice Tray 6
Cable Entry Sealing Heat-Shrinkable Sealing
Life Span More Than 25 Years

Applications

Telecommunications, railway, fiber repair, CATV, CCTV, LAN, FTTX.

Using communication cable lines overhead, underground, direct-buried, and so on.

Aerial Mounting

Aerial Mounting

Pole Mounting

Pole Mounting

Product Picture

OYI-FOSC-H8 (3)

Packaging Information

Quantity: 6pcs/Outer box.

Carton Size: 60*47*50cm.

N.Weight: 17kg/Outer Carton.

G.Weight: 18kg/Outer Carton.

OEM service available for mass quantity, can print logo on cartons.

Inner Box

Inner Packaging

Outer Carton

Outer Carton

Packaging Information
  • Products Recommended

    • OYI D Type Fast Connector

      OYI D Type Fast Connector

      Our fiber optic fast connector OYI D type is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly and can provide open flow and precast types, with optical and mechanical specifications that meet the standard for optical fiber connectors. It is designed for high quality and high efficiency during installation.
    • Micro Fiber Indoor Cable GJYPFV(GJYPFH)

      Micro Fiber Indoor Cable GJYPFV(GJYPFH)

      The structure of indoor optical FTTH cable is as follows: in the center is the optical communication unit.Two parallel Fiber Reinforced (FRP/Steel wire) are placed on the two sides. Then, the cable is completed with a black or colored  Lsoh Low Smoke Zero Halogen (LSZH/PVC) sheath.
    • FTTH Pre-Connectorized Drop Patchcord

      FTTH Pre-Connectorized Drop Patchcord

      Pre-Connectorized Drop cable is over the ground fiber optic drop cable equipped with fabricated connector on both ends, packed in certain length, and used for distributing optical signal from Optical Distribution Point (ODP) to Optical Termination Premise (OTP) in customer’s House. According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC. Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as FTTX and LAN etc.
    • Smart Cassette EPON OLT

      Smart Cassette EPON OLT

      The Series Smart Cassette EPON OLT are the high-integration and medium-capacity cassette and They are designed for operators’ access and enterprise campus network. It follows the IEEE802.3 ah technical standards and meets the EPON OLT equipment requirements of YD/T 1945-2006 Technical requirements for access network——based on Ethernet Passive Optical Network (EPON) and China telecommunication EPON technical requirements 3.0. EPON OLT possesses excellent openness, large capacity, high reliability, complete software function, efficient bandwidth utilization and Ethernet business support ability, widely applied to the operator front-end network coverage, private network construction, enterprise campus access and other access network construction.The EPON OLT series provides 4/8/16 * downlink 1000M EPON ports, and other uplink ports. The height is only 1U for easy installation and space saving. It adopts the advanced technology, offering efficient EPON solution. Moreover, it saves a lot cost for operators for it can support different ONU hybrid networking.
    • GJYFKH

      GJYFKH

    • OYI-ODF-FR-Series Type

      OYI-ODF-FR-Series Type

      The OYI-ODF-FR-Series type optical fiber cable terminal panel is used for cable terminal connection and can also be used as a distribution box. It has a 19″ standard structure and is of the fixed rack-mounted type, making it convenient to operate. It is suitable for SC, LC, ST, FC, E2000 adapters, and more. The rack mounted optical cable terminal box is a device that terminates between the optical cables and the optical communication equipment. It has the functions of splicing, termination, storing, and patching of optical cables. The FR-series rack mount fiber enclosure provides easy access to fiber management and splicing. It offers a versatile solution in multiple sizes (1U/2U/3U/4U) and styles for building backbones, data centers, and enterprise applications.

    If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.

    Facebook

    YouTube

    YouTube

    Instagram

    Instagram

    LinkedIn

    LinkedIn

    tiktok

    Tiktok

    Tiktok

    Whatsapp

    +8618926041961

    Email

    sales@oyii.net