0755-23179541 
sales@oyii.net.png)
8618926041961
OYI-DIN-FB Series
Fiber Optic DIN Terminal Box
OYI-DIN-FB Series
Product Application
Specification
|
Model |
Adapter |
Adapter Quantity |
core |
|
DIN-FB-12-SCS |
SC simplex |
12 |
12 |
|
DIN-FB-6-SCS |
SC simplex/LC duplex |
6/12 |
6 |
|
DIN-FB-6-SCD |
SC duplex |
6 |
12 |
|
DIN-FB-6-STS |
ST simplex |
6 |
6 |
Drawings: (mm)
Cable management
Packing information
|
Carton Size |
G.W |
Remark |
|
|
Inner box |
16.5*15.5*4.5cm |
0.4KG(around) |
With bubble pack |
|
External box |
48.5*47*35cm |
24KG(around) |
60sets/carton |
Rack Frame spec（optional）:
|
Name |
Model |
Size |
Capacity |
|
Rack frame |
DRB-002 |
482.6*88*180mm |
12set |
Inner Box
Outer Carton
-
FTTH Pre-Connectorized Drop Patchcord
Pre-Connectorized Drop cable is over the ground fiber optic drop cable equipped with fabricated connector on both ends, packed in certain length, and used for distributing optical signal from Optical Distribution Point (ODP) to Optical Termination Premise (OTP) in customer’s House. According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC. Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as FTTX and LAN etc. -
OYI-FAT-H16B4
Optical fiber distribution box 16 Cores fiber optic access termination box is able to hold up to 16 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box. The optical distribution box is a solution that facilitates the installation of optical termination in branch networks for FTTH environments. -
ST Type
Fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link fiber optic cables or fiber optic connectors between two fiber optic lines. It contains the interconnect sleeve that holds two ferrules together. By precisely linking two connectors, fiber optic adapters allow the light sources to be transmitted at their maximum and minimize the loss as much as possible. At the same time, fiber optic adapters have the advantages of low insertion loss, good interchangeability, and reproducibility. They are used to connect optical fiber connectors such as FC, SC, LC, ST, MU, MTRJ, D4, DIN, MPO, etc. They are widely used in optical fiber communications equipment, measuring appliances, and so on. The performance is stable and reliable. -
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber. The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access. -
Galvanized Brackets CT8, Drop Wire Cross-arm Br...
It is made from carbon steel with hot-dipped zinc surface processing, which can last a very long time without rusting for outdoor purposes. It is widely used with SS bands and SS buckles on poles to hold accessories for telecom installations. The CT8 bracket is a type of pole hardware used to fix distribution or drop lines on wooden, metal, or concrete poles. The material is carbon steel with a hot-dip zinc surface. The normal thickness is 4mm, but we can provide other thicknesses upon request. The CT8 bracket is an excellent choice for overhead telecommunication lines as it allows for multiple drop wire clamps and dead-ending in all directions. When you need to connect many drop accessories on one pole, this bracket can meet your requirements. The special design with multiple holes allows you to install all accessories in one bracket. We can attach this bracket to the pole using two stainless steel bands and buckles or bolts. -
OYI-FAT-10A Terminal Box
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.The fiber splicing,splitting,distribution can be done in this box,and meanwhile it provides solid protection and management for the FTTx network building.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
