OYI G type Fast Connector

Optic Fiber Faster Connector

OYI G type Fast Connector

Our Fiber optic fast connector OYI G type designed for FTTH(Fiber To The Home). It is a new generation of fiber connector used in assembly. It can provide open flow and precast type, which optical and mechanical specification meets the standard optical fiber connector. It is designed for high quality and high efficiency for installation.
Mechanical connectors make fiber terminaitons quick, easy and reliable. These fiber optic connectors offer terminations without any hassles and require no epoxy, no polishing, no splicing, no heating and can achieve similar excellent transmission parameters as standard polishing and spicing technology. Our connector can greatly reduce the assembly and setup time. The pre-polished connectors are mainly applied to FTTH cable in FTTH projects, directly in the end user site.

Product Detail

FAQ

Product Tags

Product Features

1.Easy and fast installation, learn to install in 30 seconds, operate in the field in 90 seconds.

2.No need for polishing or adhesive, the ceramic ferrule with embedded fiber stub is pre-polished.

3.Fiber is aligned in a v-groove through the ceramic ferrule.

4.Low-volatile, reliable matching liquid is preserved by the side cover.

5.Unique bell-shaped boot maintains the minimum fiber bend radius.

6.Precision mechanical alignment ensures low insertion loss.

7.Pre-installed, on-site assembly without end face grinding and consideration.

Technical Specifications

Items	Description
Fiber Diameter	0.9mm
End Face Polished	APC
Insertion Loss	Average value≤0.25dB, max value≤0.4dB Min
Return Loss	>45dB, Typ>50dB (SM fiber UPC polish)
Return Loss	Min>55dB, Typ>55dB (SM fiber APC polish/When use with Flat cleaver)
Fiber Retention Force	<30N (<0.2dB with impressed pressure)

Test Parameters

ltem	Description
Twist Tect	Condition: 7N load. 5 cvcles in a test
Pull Test	Condition: 10N load, 120sec
Drop Test	Condition: At 1.5m, 10 repetitions
Durability Test	Condition: 200 repetition of connecting/disconnecting
Vibrate Test	Condition: 3 axes 2hr/axis, 1.5mm(peak-peak), 10 to 55Hz(45Hz/min)
Thermal Aging	Condition: +85°C±2°℃, 96 hours
Humidity Test	Condition: 90 to 95%RH, Temp75°C for 168hours
Thermal Cycle	Condition: -40 to 85°C, 21 cycles for 168 hours

Applications

1.FTTx solution and outdoor fiber terminal end.

2.Fiber optic distribution frame, patch panel, ONU.

3.In the box, cabinet, such as wiring into the box.

4.Maintenance or emergency restoration of fiber network.

5.The construction of the fiber end user access and maintenance.

6.Optical fiber access of mobile base station.

7.Applicable to connection with field mountable indoor cable, pigtail, patch cord transformation of patch cord in.

Packaging Information

1.Quantity: 100pcs/Inner box, 2000PCS/Outer Carton.

2.Carton Size: 46*32*26cm.

3.N.Weight: 9kg/Outer Carton.

4.G.Weight: 10kg/Outer Carton.

5.OEM Service available for mass quantity, can print logo on cartons.

Inner Box

Outer Carton

Sc Connector

St Connector

St Connectors

China Fiber Lc

Fiber Sc Manufacturer

Products Recommended

FTTH Drop Cable Suspension Tension Clamp S Hook

FTTH fiber optic drop cable suspension tension clamp S hook clamps are also called insulated plastic drop wire clamps. The design of the dead-ending and suspension thermoplastic drop clamp includes a closed conical body shape and a flat wedge. It is connected to the body through a flexible link, ensuring its captivity and an opening bail. It is a kind of drop cable clamp that is widely used for both indoor and outdoor installations. It is provided with a serrated shim to increase hold on the drop wire and used to support one and two pair telephone drop wires at span clamps, drive hooks, and various drop attachments. The prominent advantage of the insulated drop wire clamp is that it can prevent electrical surges from reaching the customer premises. The working load on the support wire is effectively reduced by the insulated drop wire clamp. It is characterized by good corrosion resistant performance, good insulating properties, and long life service.

VIEW MORE
OYI3434G4R

ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol,ONU is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON REALTEK chipset and has high reliability , easy management, flexible configuration, robustness, good quality service guarantee(Qos).

VIEW MORE
SFP-ETRx-4

The ER4 is a transceiver module designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically demultiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.

VIEW MORE
OYI-ODF-MPO-Series Type

The rack mount fiber optic MPO patch panel is used for cable terminal connection, protection, and management on trunk cable and fiber optic. It is popular in data centers, MDA, HAD, and EDA for cable connection and management. It is installed in a 19-inch rack and cabinet with an MPO module or MPO adapter panel. It has two types: fixed rack mounted type and drawer structure sliding rail type. It can also be widely used in optical fiber communication systems, cable television systems, LANs, WANs, and FTTX. It is made with cold rolled steel with Electrostatic spray, providing strong adhesive force, artistic design, and durability.

VIEW MORE
OYI-FAT08D Terminal Box

The 8-core OYI-FAT08D optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The OYI-FAT08D optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. It can accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 8 cores capacity specifications to meet the expansion needs of the box.

VIEW MORE
310GR

ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON Realtek chipset and has high reliability, easy management, flexible configuration, robustness, good quality service guarantee (Qos).XPON has G / E PON mutual conversion function, which is realized by pure software.

VIEW MORE

If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.

INQUIRE