0755-23179541 
sales@oyii.net.png)
8618926041961
Jacket Round Cable
Indoor/Outdoor Double
Jacket Round Cable
Product Description
Fiber optic drop cable also called double sheath fiber drop cable is an assembly designed to transfer information by light signal in last mile internet constructions.
Optic drop cables usually consist of one or more fiber cores, reinforced and protected by special materials to have superior physical performance to applied in various applications.
Fiber Parameters
Cable Parameters
|
Items |
|
Specifications |
|
|
Fiber count |
|
1 |
|
|
Tight-buffered Fiber |
|
Diameter |
850±50μm |
|
|
|
Material |
PVC |
|
|
|
Color |
White |
|
Cable unit |
|
Diameter |
2.4±0.1 mm |
|
|
|
Material |
LSZH |
|
|
|
Color |
Black |
|
Jacket |
|
Diameter |
5.0±0.1mm |
|
|
|
Material |
HDPE |
|
|
|
Color |
Black |
|
Strength member |
|
Aramid Yarn |
|
|
Strength member FRP |
|
0.5mm±0.005mm |
|
Mechanical and Environmental Characteristics
|
Items |
Unite |
Specifications |
|
Tension (Long Term) |
N |
150 |
|
Tension (Short Term) |
N |
300 |
|
Crush（Long Term） |
N/10cm |
200 |
|
Crush（Short Term） |
N/10cm |
1000 |
|
Min. Bend Radius（Dynamic） |
mm |
20D |
|
Min. Bend Radius（Static） |
mm |
10D |
|
Operating Temperature |
℃ |
-20～+60 |
|
Storage Temperature |
℃ |
-20～+60 |
PACKAGE AND MARK
PACKAGE
Not allowed two length units of cable in one drum, two ends should be sealed, two ends should be
packed inside drum, reserve length of cable not less than 3 meters.
MARK
Cable shall be permanently marked in English at regular intervals with the following information:
1.Name of manufacturer.
2.Type of cable.
3.Fiber category.
TEST REPORT
Test report and certification supplied on request.
-
Multi Purpose Beak-out Cable GJBFJV(GJBFJH)
The multi-purpose optical level for wiring uses subunits (900μm tight buffer, aramid yarn as a strength member), where the photon unit is layered on the non-metallic center reinforcement core to form the cable core. The outermost layer is extruded into a low smoke halogen-free material (LSZH, low smoke, halogen-free, flame retardant) sheath.(PVC) -
OYI-FOSC-D101M
The optical splice closures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. There are two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man- well of pipeline, embedded situation etc. Comparing with terminal box, the closure requires much stricter requirement of seal. Sealing ring and air valve are required for closure, but that are not necessary for terminal box. -
Anchoring Clamp PA1500
The anchoring cable clamp is a high-quality and durable product. It consists of two parts: a stainless steel wire and a reinforced nylon body made of plastic. The body of the clamp is made of UV plastic, which is friendly and safe to use even in tropical environments. The FTTH anchor clamp is designed to fit various ADSS cable designs and can hold cables with diameters of 8-12mm. It is used on dead-end fiber optic cables. Installing the FTTH drop cable fitting is easy, but preparation of the optical cable is required before attaching it. The open hook self-locking construction makes installation on fiber poles easier. The anchor FTTX optical fiber clamp and drop wire cable brackets are available either separately or together as an assembly. FTTX drop cable anchor clamps have passed tensile tests and have been tested in temperatures ranging from -40 to 60 degrees. They have also undergone temperature cycling tests, aging tests, and corrosion-resistant tests. -
OYI-ODF-MPO RS288
OYI-ODF-MPO RS 288 2U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 2U height for 19 inch rack mounted application. It has 6pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 24pcs MPO cassettes HD-08 for max. 288 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel. -
OYl L Type Fast Connector
Our fiber optic fast connector, the OYI L type, is designed for FTTH (Fiber To The Home), FTTX (Fiber To The X). It is a new generation of fiber connector used in assembly that provides open flow and precast types, meeting the optical and mechanical specifications of standard optical fiber connectors. It is designed for high quality and high efficiency during installation. Mechanical connectors make fiber terminations quick, easy, and reliable. These fiber optic connectors offer terminations without any hassle and require no epoxy, no polishing, no splicing, and no heating, achieving similar excellent transmission parameters as standard polishing and splicing technology. Our connector can greatly reduce the assembly and setup time. The pre-polished connectors are mainly applied to FTTH cables in FTTH projects, directly at the end-user site. -
OYI-FAT-H16B4
Optical fiber distribution box 16 Cores fiber optic access termination box is able to hold up to 16 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box. The optical distribution box is a solution that facilitates the installation of optical termination in branch networks for FTTH environments.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
