0755-23179541 
sales@oyii.net
OYI I Type Fast Connector
Optic Fiber Fast Connector
OYI I Type Fast Connector
Product Description
SC field assembled melting free physical connector is a kind of quick connector for physical connection. It uses special optical silicone grease filling to replace the easy-to-lose matching paste. It is used for quick physical connection (not matching paste connection) of small equipment. It is matched with a group of optical fiber standard tools. It is simple and accurate to complete the standard end of optical fiber and reaching the physical stable connection of optical fiber. The assembly steps are simple and low skills required. the connection success rate of our connector is nearly 100%, and the service life is more than 20 years.
Material Name
SC-UPC / APC Field assembled melting free physical connector.
Technical Specifications
|
Device length |
50±0.5mm |
|
Working wavelength |
SM ：1310nm/1550nm |
|
Applicable optical cable |
2.0x3.0mm |
|
Insertion loss |
mean≤0.3dB max≤0.5dB ≤0.3dB ≤0.5dB |
|
Return loss |
≥50dB（UPC）≥55dB（APC） |
|
End face performance |
Conform to YD T 2341.1-2011 |
|
Mechanical durability |
1000times |
|
Cable tension |
≥30N |
|
Torsion of optical cable |
≥15N |
|
Drop performance |
Allow 10 drops under 1.5m height without abnormal performance |
|
One time assembly success rate |
≥98% |
|
Repeatable assembly |
10times |
|
Device operating temperature |
-40℃～+80℃ |
|
Hot and humid working environment |
Long term operation under 90% relative humidity ,70 ℃ |
|
Standard optical fiber tool to replace third-party cutter |
Ensure that the connector is physically and permanently docked |
|
Drop performance of optical fiber standard tools |
The end performance of 1.5m hard ground dropping by 5 times remains unchanged |
Key accessories
|
Fiber filler |
Special optical silicone grease (not ordinary and easy-to-lose conventional matching paste) |
|
Material filling quantity |
0.5X1.5X3mm=2.25mm³ (End face filled with 10000 times volume compared with previous generation product) |
|
Volatilization test at -40 ℃ to +80 ℃ for 300h |
Volatilization weight < 5% (40 years services life under simulation nature) |
Material, process and forming
|
Molding material |
PEI、PPO、PC、PBT |
|
Flame retardant grade |
UL94 V-0 |
ROHS compliant products ROHS.
Outline drawing
1 Devices and tools
SC field assembled melting free physical connector is mainly composed of sheath, main body and nut (Fig. 1). The tools required for on-site operation are distributed as shown in Fig. 2 at 200:1 (excluding cable stripping pliers and Dust-free paper). By using the tools, referenced number of coating peeling ≥1000 times, fiber termination≥3000 times.
SC
2 Assembly instructions
-
OYI-ODF-MPO RS288
OYI-ODF-MPO RS 288 2U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 2U height for 19 inch rack mounted application. It has 6pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 24pcs MPO cassettes HD-08 for max. 288 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel.
-
OYI-OCC-D Type
Fiber optic distribution terminal is the equipment used as a connection device in the fiber optic access network for feeder cable and distribution cable. Fiber optic cables are spliced directly or terminated and managed by patch cords for distribution. With the development of FTTX, outdoor cable cross-connection cabinets will be widely deployed and move closer to the end user.
-
Bare Fiber Type Splitter
A fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals, and is especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal.
-
OYI-FOSC H10
The OYI-FOSC-03H Horizontal fiber optic splice closure has two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man-well of pipeline, and embedded situations, etc. Comparing with a terminal box, the closure requires much stricter requirements for sealing. Optical splice closures are used to distribute, splice, and store the outdoor optical cables that enter and exit from the ends of the closure.
The closure has 2 entrance ports and 2 output ports. The shell of the product is made from ABS+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection.
-
Drop Cable Anchoring Clamp S-Type
Drop wire tension clamp s-type, also called FTTH drop s-clamp, is developed to tension and support flat or round fiber optic cable on intermediate routes or last mile connections during outdoor overhead FTTH deployment. It is made of UV proof plastic and a stainless steel wire loop processed by injection molding technology.
-
Non-metallic Central Tube Access Cable
The fibers and water-blocking tapes are positioned in a dry loose tube. The loose tube is wrapped with a layer of aramid yarns as a strength member. Two parallel fiber-reinforced plastics (FRP) are placed on the two sides, and the cable is completed with an outer LSZH sheath.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.