0755-23179541 
sales@oyii.net
OYI-FOSC H12
Fiber Optic Splice Closure Horizontal Fiber Optical Type
OYI-FOSC H12
Product Features
The closure casing is made of high-quality engineering ABS and PP plastics, providing excellent resistance against erosion from acid, alkali salt, and aging. It also has a smooth appearance and a reliable mechanical structure.
The mechanical structure is reliable and can withstand harsh environments, including intensive climate changes and demanding working conditions. The protection grade reaches IP68.
The splice trays inside the closure are turn-able like booklets, providing adequate curvature radius and space for winding optical fiber to ensure a curvature radius of 40mm for optical winding. Each optical cable and fiber can be operated individually.
The closure is compact, has a large capacity, and is easy to maintain. The elastic rubber seal rings inside the closure provide good sealing and sweat-proof performance.
Specifications
|
Item No. |
OYI-FOSC-04H |
|
Size (mm) |
430*190*140 |
|
Weight (kg) |
2.45kg |
|
Cable Diameter (mm) |
φ 23mm |
|
Cable Ports |
2 in 2 out |
|
Max Capacity Of Fiber |
144 |
|
Max Capacity Of Splice Tray |
24 |
|
Cable Entry Sealing |
Inline,Horizontal-Shrinkable Sealing |
|
Sealing Structure |
Silicon Gum Material |
Applications
Telecommunications, railway, fiber repair, CATV, CCTV, LAN, FTTX.
Using in communication cable line overhead mounted, underground, direct-buried, and so on.
Packaging Information
Quantity: 10pcs/Outer box.
Carton Size: 45*42*67.5cm.
N.Weight: 27kg/Outer Carton.
G.Weight: 28kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Box
Outer Carton
-
Module OYI-1L311xF
OYI-1L311xF Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector, the module data link up to 10km in 9/125um single mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also 02 can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.
-
OYI-FAT48A Terminal Box
The 48-core OYI-FAT48A series optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
The OYI-FAT48A optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage area. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 3 cable holes under the box that can accommodate 3 outdoor optical cables for direct or different junctions, and it can also accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 48 cores capacity specifications to meet the expansion needs of the box.
-
OYI-FAT08 Terminal Box
The 8-core OYI-FAT08A optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
-
OYI-ODF-MPO RS288
OYI-ODF-MPO RS 288 2U is a high density fiber optic patch panel that made by high quality cold roll steel material, the surface is with electrostatic powder spraying. It is sliding type 2U height for 19 inch rack mounted application. It has 6pcs plastic sliding trays, each sliding tray is with 4pcs MPO cassettes. It can load 24pcs MPO cassettes HD-08 for max. 288 fiber connection and distribution. There are cable management plate with fixing holes at back side of patch panel.
-
OYI-NOO1 Floor-Mounted Cabinet
Frame: Welded frame, stable structure with precise craftsmanship.
-
OYI-FAT16J-A Series Terminal Box
The 16-core OYI-FAT16J-A optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
The OYI-FAT16J-A optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 4 cable holes under the box that can accommodate 4 outdoor optical cables for direct or different junctions, and it can also accommodate 16 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 16 cores capacity specifications to accommodate the box’s expansion needs.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
