0755-23179541 
sales@oyii.net.png)
8618926041961
Central Loose Tube Armored Fiber Optic Cable
GYXTW
Central Loose Tube Armored Fiber Optic Cable
Product Features
The two parallel steel wire strength members provide enough tensile strength.
Unit-tube special gel in the tube offers protection for the fiber. Small diameter and light weight make it easy to lay, and it has excellent bending properties.
The outer sheath protects the cable from ultraviolet radiation.
Resistant to high and low temperature cycles, resulting in anti-aging and longer lifespan.
Loose-tube stranding cable core ensures the cable structure is stable.
Special designed compact structure is good at preventing loose tubes from shrinking.
PSP with enhanced moisture-proofing.
Optical Characteristics
| Fiber Type | Attenuation | 1310nm MFD
(Mode Field Diameter) |
Cable Cut-off Wavelength λcc(nm) | |
| @1310nm(dB/KM) | @1550nm(dB/KM) | |||
| G652D | ≤0.35 | ≤0.22 | 9.2±0.4 | ≤1260 |
| G657A1 | ≤0.35 | ≤0.22 | 9.2±0.4 | ≤1260 |
| G657A2 | ≤0.35 | ≤0.22 | 9.2±0.4 | ≤1260 |
| G655 | ≤0.4 | ≤0.23 | (8.0-11)±0.7 | ≤1450 |
| 50/125 | ≤3.5 @850nm | ≤1.5 @1300nm | / | / |
| 62.5/125 | ≤3.5 @850nm | ≤1.5 @1300nm | / | / |
Technical Parameters
| Fiber Count | Cable Diameter (mm) ±0.5 |
Cable Weight (kg/km) |
Tensile Strength (N) | Crush Resistance (N/100mm) | Bending Radius (mm) | |||
| Long Term | Short Term | Long Term | Short Term | Static | Dynamic | |||
| 2-12 | 8.0 | 90 | 600 | 1500 | 300 | 1000 | 10D | 20D |
| 14-24 | 9.0 | 110 | 600 | 1500 | 300 | 1000 | 10D | 20D |
Application
Long distance communication and LAN.
Laying Method
Aerial, Duct
Operating Temperature
| Temperature Range | ||
| Transportation | Installation | Operation |
| -40℃~+70℃ | -5℃~+45℃ | -40℃~+70℃ |
Standard
YD/T 769-2010, IEC 60794
Packing And Mark
OYI cables are coiled on bakelite, wooden, or ironwood drums. During transportation, the right tools should be used to avoid damaging the package and to handle them with ease. Cables should be protected from moisture, kept away from high temperatures and fire sparks, protected from over-bending and crushing, and protected from mechanical stress and damage. It is not allowed to have two lengths of cable in one drum, and both ends should be sealed. The two ends should be packed inside the drum, and a reserve length of cable not less than 3 meters should be provided.
The color of cable markings is white. The printing shall be carried out at intervals of 1 meter on the outer sheath of the cable. The legend for the outer sheath marking can be changed according to the user's requests.
Test report and certification provided.
-
All Dielectric Self-Supporting Cable
The structure of ADSS (single-sheath stranded type) is to place 250um optical fiber into a loose tube made of PBT, which is then filled with waterproof compound. The center of the cable core is a non-metallic central reinforcement made of fiber-reinforced composite (FRP). The loose tubes (and filler rope) are twisted around the central reinforcing core. The seam barrier in the relay core is filled with water-blocking filler, and a layer of waterproof tape is extruded outside the cable core. Rayon yarn is then used, followed by extruded polyethylene (PE) sheath into the cable. It is covered with a thin polyethylene (PE) inner sheath. After a stranded layer of aramid yarns is applied over the inner sheath as a strength member, the cable is completed with a PE or AT (anti-tracking) outer sheath. -
Central Loose Tube Stranded Figure 8 Self-suppo...
The fibers are positioned in a loose tube made of PBT. The tube is filled with a water-resistant filling compound. The tubes (and the fillers) are stranded around the strength member into a compact and circular core. Then, the core is wrapped with swelling tape longitudinally. After part of the cable, accompanied by the stranded wires as the supporting part, is completed, it is covered with a PE sheath to form a figure-8 structure. -
Double FRP reinforced non-metallic central bund...
The structure of the GYFXTBY optical cable consists of multiple (1-12 cores) 250μm colored optical fibers (single-mode or multimode optical fibers) that are enclosed in a loose tube made of high-modulus plastic and filled with waterproof compound. A non-metallic tensile element (FRP) is placed on both sides of the bundle tube, and a tearing rope is placed on the outer layer of the bundle tube. Then, the loose tube and two non-metallic reinforcements form a structure that is extruded with high-density polyethylene (PE) to create an arc runway optical cable. -
OYI-F401
Optic patch panel provides branch connection for fiber termination. It is an integrated unit for fiber management, and can be used as distribution box. It divides into fix type and sliding-out type. This equipment function is to fix and manage the fiber optic cables inside the box as well as provide protection. Fiber optic termination box is modular so they are applicable to your existing systems without any modification or additional work. Suitable for installation of FC, SC, ST, LC, etc. adaptors, and suitable for fiber optic pigtail or plastic box type PLC splitters. -
OYI-FTB-10A Terminal Box
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building. -
OYI HD-08
OYI HD-08 is an ABS+PC plastic MPO box consists of box cassette and cover. It can load 1pc MTP/MPO adapter and 3pcs LC quad (or SC duplex) adapters without flange. It has fixing clip that suitable for installing in matched sliding fiber optic patch panel. There are push type operating handles at both side of MPO box. It is easy to install and disassemble.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
