0755-23179541 
sales@oyii.netOYI 323GER
3213GER
XPON ON
3213GER
Product Description
ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, ONU is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON Realtek chip set and has high reliability， easy management，flexible configuration，robustness，good quality service guarantee(Qos).
ONU adopts RTL for WIFI application that supports IEEE802.11b/g/n standard at the same time，a WEB system provided simplifies the configuration of the ONU and connects to INTERNET conveniently for users.
XPON has G / E PON mutual conversion function, which is realized by pure software.
ONU support one pots for VOIP application.
Product Features
1. comply fully with ITU-G.984.1/2/3/4 standard and G.987.3 protocol.
2. support downlink 2.488 Gbits/s rate and uplink 1.244 Gbits/s rate.
3. support bidirectional FEC and RS (255,239) FEC CODEC.
4. support 32 TCONT and 256 GEMPORT.
5. support AES128 decryption function of G.984 standard.
6. support SBA and DBA dynamically broadband allocation.
7. support the PLOAM function of G.984 standard.
8. support Dying-Gasp check and report.
9. support synchronous Ethernet.
10. good interworking with the OLT from different manufacturers，such as huawei, Realtek, Cortina etc.
11. down-link LAN ports:1*10/100M with auto-negotiation 1*10/100/1000M with auto-negotiation.
12. support the rogue ONU alarm function.
13. Support VLAN function.
14. operation mode: SFU or HGU option.
15. support IEEE802.11b/g/n standard for WIFI.
16. double antennas: external box with 5DBi.
17. support of 300Mbps PHY rate.
18. support multiply SSID.
19. Multiple encryption methods :WFA、WPA、WPA2、WAPI.
20. one port for VOIP，support H.248 、SIP protocol optional.
Specification
|
Tech parameters |
Description |
|
|
1 |
Up-link interface |
1 XPON interface，SC single mode single fiber RX 2.488 Gbits/s rate and TX 1.244 Gbits/s rate Fiber type：SC/APC Optical power：0~4 dBm Sensitivity：-28 dBm safety: ONU authentication mechanism |
|
2 |
Wavelength(nm) |
TX 1310nm，RX 1490nm |
|
3 |
Fiber connector |
SC/APC connector |
|
4 |
Down-link data interface |
1*10/100Mbps and 1*10/100/1000M auto-negotiation Ethernet interface, RJ45 interface |
|
5 |
Indicator LED |
7 pcs，refer to NO.6 definition of indicator LED |
|
6 |
DC supply interface |
input＋12V 1A，footprint：DC0005 ø2.1MM |
|
7 |
Power |
≤5W |
|
8 |
Operating temperature |
-5～+55℃ |
|
9 |
Humidity |
10～85%（non-condensation） |
|
10 |
Storage temperature |
-30～+70℃ |
|
11 |
Dimension（MM） |
155*92*32mm（mainframe） |
|
12 |
Weight |
0.38Kg（mainframe） |
1.WIFI Characteristics
|
Tech features |
Description |
|
|
1 |
Antenna |
2T2R Mode 5DBI Gain, Frequency:2.4G |
|
2 |
Rate |
WIFI4 wireless speed of 300Mbps, with 13 channels; |
|
3 |
Encryption methods |
WFA、WPA、WPA2、WAPI |
|
4 |
Transmission power |
WiFi4 17dBm； |
|
5 |
Receiving sensitivity |
WiFi4-59dBm @ channel 11, MCS7 |
|
6 |
WPS feature |
support |
2.VOIP Tech Features
|
Tech features |
Description |
|
|
1 |
Voltage and Current Monitoring |
The continuously monitors the TIP, RING, and battery voltages and currents via an on-chip Monitor ADC |
|
2 |
Power Monitoring and Power Fault Detection |
The monitoring functions are used to continuously protect against excessive power conditions |
|
3 |
Thermal Overload Shutdown |
If the die temperature exceeds the maximum junction temperature threshold, the device will shut itself down |
|
4 |
Default configuration |
Voice protocol: SIP; Media stream encoding: G722, G729, G711A, G711U, fax: disabled; |
Installation and Initialization
1.Insert SC/APC fiber patch cord or pigtail into PON interface of the product.
2.Use the network untwised-pair from network equipment to the Lan Interface of product, the LAN interface of this product supports the AUTO-MDIX function.
3.Offer product power, please use the DC plug of adapter to connect with the DC socket of the product, and the AC plug of the power adapter should be plugged into the AC socket.
4.The power will be connected successfully if the PWR indicator ON, the system will be into initial stage, and then, to wait for the completion of system initialization.
Definition of indicator LED
|
Symbol |
Color |
Meaning |
|
PWR |
Green |
ON: successfully connect with power OFF: fail to connect with power |
|
PON |
Green |
ON: ONU port link correctly Flicker: PON registering OFF: ONU ports link link faulty |
|
LAN |
Green |
ON: Link up correctly Flicker: data is transmitting OFF: link down faulty |
|
POTS |
Green |
ON: Register success OFF: Register fail |
|
WIFI |
Green |
ON: WIFI is running OFF: WIFI startup fail |
|
LOS |
Red |
Flicker: fail to connect with PON port OFF: detected fiber to input |
Packing list
|
Name |
Quantity |
Unit |
|
XPON ONU |
1 |
pcs |
|
Supply Power |
1 |
pcs |
|
Manual & Warranty Card |
1 |
pcs |
Order information ONU Weight
|
Product Model |
Function and LAN |
LAN Ports |
Type of Fiber |
Default Mode |
|
OYI 323GER |
1GE+1FE 2.4 G WIFI 1VOIP |
2LAN，1GE +1FE RJ45 |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
OYI 321GER |
1GE+1FE 2.4 G WIFI |
2LAN，1GE +1FE RJ45 |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
OYI 3213GER |
1GE+1FE 2.4 G WIFI 1 VOIP |
2LAN，1GE +1FE RJ45 |
1 UP LINK XPON, BOSA UPC/APC |
HGU |
|
OYI 3212GDER
|
1GE+1FE 2.4 G WIFI1 WDM CATV |
2LAN, 1GE +1FE RJ45
|
1 UP LINK XPON, BOSA UPCIAPC |
HGU |
|
OYI 32123GDER |
1GE+1FE2.4 G WIF!1 VOIP 1 WDM CATV |
2LAN, 1GE +1FE RJ45 |
1 UP LINK XPON, B OSA UPCIAPC |
HGU |
ONU Weight
|
Product Form |
Product Model |
Weight (kg) |
Bare Weight （kg) |
Dimension |
Carton |
Product Description |
|||
|
Product: （mm） |
Package： (mm) |
Carton size:(cm) |
Number |
Weight (kg) |
|||||
|
2 Ports ONU |
|
0.3 |
0.15 |
108*85*25 |
146*117*66 |
45.9*42*34.2 |
40 |
13.6 |
1GE 1FE VOIP |
|
2 Ports ONU |
OYI 321GER |
0.38 |
0.18 |
155*92*32 |
220*160*38 |
49.5*48*37.5 |
50 |
20.3 |
1GE 1FE WIFI |
|
2 Ports ONU |
OYI 3213GER |
0.38 |
0.18 |
155*92*32 |
220*160*38 |
49.5*48*37.5 |
50 |
20.3 |
1GE 1FE WIFI, VOIP |
|
2 Ports ONU |
OYI 3212GDER |
0.38 |
0.18 |
155*92*32 |
220*160*38 |
49.5*48*37.5 |
50 |
20.3 |
1GE 1FE WIFI, CATV |
|
2 Ports ONU |
OYI 32123GDER |
0.38 |
0.18 |
155*92*32 |
220*160*38 |
49.5*48*37.5 |
50 |
20.3 |
1GE 1FE WIFI, VOIP, CATV |
-
OYI-FAT-10A Terminal Box
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system.The fiber splicing,splitting,distribution can be done in this box,and meanwhile it provides solid protection and management for the FTTx network building.
-
SFP-ETRx-4
The ER4 is a transceiver module designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically demultiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.
-
MPO / MTP Trunk Cables
Oyi MTP/MPO Trunk & Fan-out trunk patch cords provide an efficient way to install a large number of cables quickly. It also provides high flexibility on unplugging and re-use. It is especially suitable for the areas that require rapid deployment of high-density backbone cabling in data centers, and high fibre environments for high performance.
MPO / MTP branch fan-out cable of us use high-density multi-core fiber cables and MPO / MTP connector
through the intermediate branch structure to realize switching branch from the MPO / MTP to LC, SC, FC, ST, MTRJ and other common connectors. A variety of 4-144 single-mode and multi-mode optical cables can be used, such as common G652D/G657A1/G657A2 single-mode fiber, multimode 62.5/125, 10G OM2/OM3/OM4, or 10G multimode optical cable with high bending performance and so on .It is suitable for direct connection of MTP-LC branch cables–one end is 40Gbps QSFP+, and the other end is four 10Gbps SFP+. This connection decomposes one 40G into four 10G. In many existing DC environments, LC-MTP cables are used to support high-density backbone fibers between switches, rack-mounted panels, and main distribution wiring boards.
-
OYI-ATB08A Desktop Box
OYI-ATB08A 8-port desktop box is developed and produced by the company itself. The product’s performance meets the requirements of industry standards YD/T2150-2010. It is suitable for installing multiple types of modules and can be applied to the work area wiring subsystem to achieve dual-core fiber access and port output. It provides fiber fixing, stripping, splicing, and protection devices, and allows for a small amount of redundant fiber inventory, making it suitable for FTTD (fiber to the desktop) system applications. The box is made of high-quality ABS plastic through injection molding, making it anti-collision, flame retardant, and highly impact-resistant. It has good sealing and anti-aging properties, protecting the cable exit and serving as a screen. It can be installed on the wall.
-
OYI-FATC 8A Terminal Box
The 8-core OYI-FATC 8A optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use.
The OYI-FATC 8A optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 4 cable holes under the box that can accommodate 4 outdoor optical cables for direct or different junctions,and it can also accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 48 cores capacity specifications to accommodate the box’s expansion needs.
-
Double FRP reinforced non-metallic central bund...
The structure of the GYFXTBY optical cable consists of multiple (1-12 cores) 250μm colored optical fibers (single-mode or multimode optical fibers) that are enclosed in a loose tube made of high-modulus plastic and filled with waterproof compound. A non-metallic tensile element (FRP) is placed on both sides of the bundle tube, and a tearing rope is placed on the outer layer of the bundle tube. Then, the loose tube and two non-metallic reinforcements form a structure that is extruded with high-density polyethylene (PE) to create an arc runway optical cable.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
