0755-23179541 
sales@oyii.net.png)
8618926041961
10&100&1000M
Media Converter
10&100&1000M
Product Description
10/100/1000M adaptive fast Ethernet optical Media Converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100 Base-TX/1000 Base-FX and 1000 Base-FX network segments, meeting long-distance, high - speed and high-broadband fast Ethernet workgroup users’ needs, achieving high-speed remote interconnection for up to 100 km's relay-free computer data network. With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks.
Product Features
1. In accordance with Ethernet standards IEEE802.3,10/100Base-TX/1000Base-TX and 1000Base-FX.
2. Supported Ports: LC for optical fiber; RJ45 for twisted pair.
3. Auto-adaptation rate and full/half-duplex mode supported at twisted pair port.
4. Auto MDI/MDIX supported without need of cable selection.
5. Up to 6 LEDs for status indication of optical power port and UTP port.
6. External and built-in DC power supplies provided.
7. Up to 1024 MAC addresses supported.
8. 512 kb data storage integrated, and 802.1X original MAC address authentication supported.
9. Conflicting frames detection in half-duplex and flow control in full duplex supported.
Technical Specifications
|
Technical Parameters for 10/100/1000M Adaptive Fast Ethernet Optical Media Converter |
||
|
|
||
|
Number of Network Ports |
1 channel |
|
|
Number of Optical Ports |
1 channel |
|
|
NIC Transmission Rate |
10/100/1000Mbit/s |
|
|
NIC Transmission Mode |
10/100/1000M adaptive with support for automatic inversion of MDI/MDIX |
|
|
Optical Port Transmission Rate |
1000Mbit/s |
|
|
Operating Voltage |
AC 220V or DC +5V |
|
|
Over all Power |
<3W |
|
|
Network Ports |
RJ45 port |
|
|
Optical Specifications |
Optical Port: SC, LC (Optional) Multi-Mode: 50/125, 62.5/125um Single-Mode: 8.3/125, 8.7/125um, 8/125,10/125um Wavelength: Single-Mode: 1310/1550nm |
|
|
Data Channel |
IEEE802.3x and collision base backpressure supported Working Mode: Full/half duplex supported Transmission Rate: 1000Mbit/s with error rate of zero |
|
Product Pictures
Operating Environment
1.Operating Voltage
AC 220V/ DC +5V
2.Operating Humidity
2.1 Operating Temperature: 0℃ to +60℃
2.2 Storage Temperature: -20℃ to +70℃ Humidity: 5% to 90%
3.Quality Assurance
3.1 MTBF > 100,000 hours;
3.2 Replacement within one year and non-charge repair within three years guaranteed.
4.Application Fields
4.1 For intranet prepared for expansion from 100M to 1000M.
4.2 For integrated data network for multimedia such as image, voice and etc.
4.3 For point-to-point computer data transmission.
4.5 For computer data transmission network in a wide range of business application.
4.6 For broadband campus network, cable TV and intelligent FTTB/FTTH data tape.
4.7 In combination with switchboard or other computer network facilitates for: chain-type, star-type and ring-type network and other computer networks.
Remarks and Notes
Instructions on Media Converter Panel
Identification for front panel of the media converter is shown below:
1.Identification of Media Converter TX - transmitting terminal; RX - receiving terminal;
2.PWR Power Indicator Light – “ON” means normal operation of DC 5V power supply adaptor.
3.1000M Indicator Light “ON” means the rate of the electric port is 1000 Mbps, while “OFF” means the rate is 100 Mbps.
4.LINK/ACT (FP) “ON” means connectivity of the optical channel; “FLASH” means data transfer in the channel; “OFF” means non-connectivity of the optical channel.
5.LINK/ACT (TP) “ON” means connectivity of the electric circuit; “FLASH” means data transfer in the circuit; “OFF” means non-connectivity of the electric circuit.
6.SD Indicator Light “ON” means input of optical signal; “OFF” means non input.
7.FDX/COL: “ON” means full duplex electric port; “OFF” means half-duplex electric port.
8.UTP Non shielded twisted pair port; Instructions on Rear Panel Mounting Dimensions Sketch.
Mounting Dimensions Sketch
Ordering information
|
OYI-8110G-SFP |
1 GE SFP slot + 1 1000M RJ45 port |
0~70°C |
|
OYI-8110G-SFP-AS |
1 GE SFP slot + 1 10/100/1000M RJ45 port |
0~70°C |
-
8 Cores Type OYI-FAT08E Terminal Box
The 8-core OYI-FAT08E optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The OYI-FAT08E optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. It can accommodate 8 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 8 cores capacity specifications to meet the expansion needs of the box. -
ABS Cassette Type Splitter
A fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals, especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal. -
310GR
ONU product is the terminal equipment of a series of XPON which comply fully with ITU-G.984.1/2/3/4 standard and meet the energy-saving of G.987.3 protocol, is based on mature and stable and high cost-effective GPON technology which adopts high-performance XPON Realtek chipset and has high reliability, easy management, flexible configuration, robustness, good quality service guarantee (Qos).XPON has G / E PON mutual conversion function, which is realized by pure software. -
Self-Locking Nylon
Material: PA66 (UL-approved Polyamide 66), 94V‑2 rated. Features excellent heat resistance, anti-corrosion, electrical insulation, and anti-aging properties. Halogen‑free, phosphorus‑free, and environmentally friendly. Operating Temperature: -35°C to 85°C Color: Natural (white, standard), UV-resistant black; custom colors available upon request. Certifications: CE, RoHS, SGS Standard export packing :100 pcs/polybag with label; custom packaging available upon request. Usage: Reliable self-locking design for easy installation. Widely used for bundling, fixing, and managing optical fiber cables, communication lines, and various wiring systems. Oyi International., Ltd. is a dynamic and innovative fiber optic cable company based in Shenzhen, China. We provide high-performance cable ties and accessories optimized for optical fiber cables, communication infrastructure, and industrial wiring solutions. -
OYI-FAT16J-A Series Terminal Box
The 16-core OYI-FAT16J-A optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The OYI-FAT16J-A optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 4 cable holes under the box that can accommodate 4 outdoor optical cables for direct or different junctions, and it can also accommodate 16 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 16 cores capacity specifications to accommodate the box’s expansion needs. -
J Clamp J-Hook Big Type Suspension Clamp
OYI anchoring suspension clamp J hook is durable and of good quality, making it a worthwhile choice. It plays an important role in many industrial settings. The main material of the OYI anchoring suspension clamp is carbon steel, with an electro galvanized surface that prevents rust and ensures a long lifespan for pole accessories. The J hook suspension clamp can be used with the OYI series stainless steel bands and buckles to fix cables onto poles, playing different roles in different places. Different cable sizes are available. The OYI anchoring suspension clamp can also be used to link signs and cable installations on posts. It is electro galvanized and can be used outdoors for over 10 years without rusting. It has no sharp edges, with rounded corners, and all items are clean, rust free, smooth, and uniform throughout, free from burrs. It plays a huge role in industrial production.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
