0755-23179541 
sales@oyii.net.png)
8618926041961
ADSS Suspension Clamp Type B
Hardware Products Overhead Line Fittings
ADSS Suspension Clamp Type B
The suspension clamp brackets can be used for short and medium spans of fiber optic cables, and the suspension clamp bracket is sized to fit specific ADSS diameters. Standard suspension clamp bracket can be employed with the fitted gentle bushings, which can provide a good support/groove fit and prevent the support from damaging the cable. The bolt supports, like guy hooks, pigtail bolts, or suspender hooks, can be supplied with the aluminum captive bolts to simplify installation with no loose parts.
This helical suspension set is of high quality and durability. It has many uses and can be used in various places. Additionally, it is easy to install without any tools, which can save workers’ time. The set has many features and plays a significant role in many places. It has a good appearance with a smooth surface without burrs. Furthermore, it has high temperature resistance, good corrosion resistance, and is not prone to rust.
This tangent ADSS suspension clamp is very convenient for ADSS installation for spans less than 100m. For larger spans, a ring type suspension or single layer suspension for ADSS can be applied accordingly.
Product Video
Product Features
Preformed rods and clamps for easy operation.
Rubber inserts provide protection for ADSS fiber optic cable.
High-quality aluminum alloy material improves mechanical performance and corrosion resistance.
Stress is evenly distributed with no concentrated points.
Installation point rigidity and ADSS cable protection performance are enhanced.
Better dynamic stress bearing capacity with double layer structure.
Fiber optic cable has a large contact area.
Flexible rubber clamps enhance self-damping.
The flat surface and round end increase the corona discharge voltage and reduce power loss.
Convenient installation and maintenance-free.
Specifications
| Model | Available Diameter Of Cable (mm) | Weight (kg) | Available Span (≤m) |
| OYI-10/13 | 10.5-13.0 | 0.8 | 100 |
| OYI-13.1/15.5 | 13.1-15.5 | 0.8 | 100 |
| OYI-15.6/18.0 | 15.6-18.0 | 0.8 | 100 |
| Other diameters can be made upon your request. | |||
Applications
Overhead power line accessories.
Electric power cable.
ADSS cable suspension, hanging, fixing to walls and poles with drive hooks, pole brackets, and other drop wire fittings or hardware.
Packaging Information
Quantity: 30pcs/Outer box.
Carton Size: 42*28*28cm.
N.Weight: 25kg/Outer Carton.
G.Weight: 26kg/Outer Carton.
OEM service available for mass quantity, can print logo on cartons.
Inner Packaging
Outer Carton
-
OYI-FAT16J-A Series Terminal Box
The 16-core OYI-FAT16J-A optical terminal box performs in accordance with the industry standard requirements of YD/T2150-2010. It is mainly used in the FTTX access system terminal link. The box is made of high-strength PC, ABS plastic alloy injection molding, which provides good sealing and aging resistance. In addition, it can be hung on the wall outdoors or indoors for installation and use. The OYI-FAT16J-A optical terminal box has an inner design with a single-layer structure, divided into the distribution line area, outdoor cable insertion, fiber splicing tray, and FTTH drop optical cable storage. The fiber optical lines are very clear, making it convenient to operate and maintain. There are 4 cable holes under the box that can accommodate 4 outdoor optical cables for direct or different junctions, and it can also accommodate 16 FTTH drop optical cables for end connections. The fiber splicing tray uses a flip form and can be configured with 16 cores capacity specifications to accommodate the box’s expansion needs. -
OYI-FOSC H13
The OYI-FOSC-05H Horizontal fiber optic splice closure has two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, manhole of pipeline, and embedded situations, etc. Comparing with a terminal box, the closure requires much stricter requirements for sealing. Optical splice closures are used to distribute, splice, and store the outdoor optical cables that enter and exit from the ends of the closure. The closure has 3 entrance ports and 3 output ports. The shell of the product is made from ABS/PC+PP material. These closures provide excellent protection for fiber optic joints from outdoor environments such as UV, water, and weather, with leak-proof sealing and IP68 protection. -
FTTH Pre-Connectorized Drop Patchcord
Pre-Connectorized Drop cable is over the ground fiber optic drop cable equipped with fabricated connector on both ends, packed in certain length, and used for distributing optical signal from Optical Distribution Point (ODP) to Optical Termination Premise (OTP) in customer’s House. According to the transmission medium, it divides to Single Mode and Multi Mode Fiber Optic Pigtail; According to the connector structure type, it divides FC, SC, ST, MU, MTRJ, D4, E2000, LC etc.; According to the polished ceramic end-face, it divides to PC, UPC and APC. Oyi can provide all kinds of optic fiber patchcord products; The transmission mode, optical cable type and connector type can be arbitrarily matched. It has the advantages of stable transmission, high reliability and customization; it is widely used in optical network scenarios such as FTTX and LAN etc. -
OPGW Optical Ground Wire
The central tube OPGW is made of stainless steel (aluminum pipe) fiber unit in the center and aluminum clad steel wire stranding process in the outer layer. The product is suitable for the operation of single tube optical fiber unit. -
24-48Port, 1RUI2RUCable Management Bar Included
1U 24 Ports（2u 48） Cat6 UTP Punch Down Patch Panel for 10/100/1000Base-T and 10GBase-T Ethernet. The 24-48 port Cat6 patch panel shall terminate 4-pair, 22-26 AWG, 100 ohm unshielded twisted pair cable with 110 punch down termination, which is color-coded for T568A/B wiring, providing the perfect 1G/10G-T speed solution for PoE/PoE+ applications and any voice or LAN application. For hassle-free connections, this Ethernet patch panel offers straight Cat6 ports with 110-type termination, making it easy to insert and remove your cables. The clear numbering on the front and back of the network patch panel enables quick and easy identification of cable runs for efficient system management. Included cable ties and a removable cable management bar help organize your connections, cut down on cord clutter, and maintain stable performance. -
Mini Steel Tube Type Splitter
A fiber optic PLC splitter, also known as a beam splitter, is an integrated waveguide optical power distribution device based on a quartz substrate. It is similar to a coaxial cable transmission system. The optical network system also requires an optical signal to be coupled to the branch distribution. The fiber optic splitter is one of the most important passive devices in the optical fiber link. It is an optical fiber tandem device with many input terminals and many output terminals. It is especially applicable to a passive optical network (EPON, GPON, BPON, FTTX, FTTH, etc.) to connect the ODF and the terminal equipment and to achieve the branching of the optical signal.
If you're looking for a reliable, high-speed fibre optic cable solution, look no further than OYI. Contact us now to see how we can help you stay connected and take your business to the next level.
